When I share video to my macbook it cuts off opening titles and starts vid a few seconds in. I have tried making titles part of timeline, not appending them, but it does the same either way. Any advice on how to get it to include opening titles?
I'm having trouble getting FCPX to share my entire video, it cuts off the opening titles and starts a few seconds in when I share to my MacBook. It's my first vid so I've done a few daft things like editing the audio after I put the visual together, so had to detach it and re-attach it. Is this the possible root of my problems?
Hi Tom
Version 10.0.5 FCPX. Can't send screenshot at present. However on all three versions of the video I have in Projects there is a shaded area on the left at the start. Shaded from top to bottom over the credits and sometimes over the first two or three seconds, this extends to the left and fills the project box before the 00.00 counter and the timeline starts. This only appears when I expand the timeline so I can see the clips I've attached. It's not visible if I just have the timeline and no clips or audio showing. I think it corresponds to the part the export is cutting off. I'm self-taught from tutorials and handbook and it's all new to me, no editing experience prior to the last two weeks.
Couldn't upload to Youtube at all, though it did go to Facebook, but with two audio tracks playing, so export is proving a bit tricky. Also after attempting to share two different versions of the vid an icon has now appeared beside it's name in my Projects next to these two versions showing an audio sign and triangle with exclamation mark. Another version of the vid has the same icon and freezes the computer when I try to open it and is just a black space where the timeline should be. I can't even Move To Trash. I think there may be an audio problem: the main timeline footage should have had audio but was silent, probably a mistake made when it was shot. So I synched audio. However, I think there is audio on the main footage but just unavailable to me. Could be this is messing it up? I'm clearly doing something wrong! Also as mentioned, edited the audio after I'd synched it, so had to detach the synched audio and re-attach an edited version. Could be I went wrong there. I just highlighted, deleted and attached the new audio.
Might download an unexpanded version and see if anything's different. Failing that may go back to scratch, synch edited audio and try again and just not put on start credits. However, could it just be a bug in the software? Would re-installing help?
Appreciate your help.
Thanks.
Similar Messages
-
my iPhone4 is showing no service so i power down but when i power back up it says to plug into itunes and restore, i had this same issue with another iPhone and apple replaced it but its doing the same thing on this phone any help would be apprecaited
AAAAAANNNNNNDDDDDDD go figure no one can help!!!!! i just dont know what to do, i guess no-one else does either lol!!!! thanks anyway!!!!!
-
I have a new airbook, 10.7.4 LION, thunderbolt ethernet adapter and when trying to install 1.2.1 thunderbolt upgrade it says "this software not supported on this system"? Any advice on how to get the adapter to work?
Welcome to Apple Support Communities
If you purchased the computer before 2010, your computer hasn't got Thunderbolt, so you can't use it -
I have attempted to update ipad1 with latest update but after extracting software it goes to restoring ipad software and stops at 25% on the bar. Have tried several times but it does the same, I now have one usless ipad help! any ideas ?
when connected click the iPad in the left navigation panel of iTunes, on the bottom of the summary tab: how much memory is "free" (grey)?
-
HP3050 All-in-one
Copier makes dirty marks on the pages. New cartridge installed as well, but still doing the same. When printing, it is fine and clear. Any page copied has the long stripes. Please adviceI have the same problem. Please help.
-
I have elements 5 on a vista pc. Elements will not open I receive the message "Attempt to access invalid address". I have re-installed but still receive the same message. Any ideas please.
Make sure your user account has full administrative permissions. Then, at this stage of the game, I would take the following steps:
- Re-create the Preferences file following these instructions:
Re-create the Photoshop Elements preferences file to eliminate problems that a damaged preferences file might cause.
Note: When you use this solution, Photoshop Elements will create a new preferences file and you will lose custom settings associated with your current preferences file. However, the file you rename in step 2 is your original preferences file. If you determine that the preferences file is not causing the problem, then you can restore your custom settings by undoing the instructions below.
To re-create the Photoshop Elements preferences file:
Quit Photoshop Elements.
Locate the Adobe Photoshop Elements preferences files. In Photoshop Elements 5.0, there are two preferences files, one for Organizer and one for Editor:
Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Organizer\psa.prf
Users\[ user ]\AppData\Roaming\Adobe\Photoshop Elements\5.0\Editor\Photoshop Elements 5 Prefs.psp
Rename the extension for the files (for example, to psa.old).
Start Photoshop Elements. Photoshop Elements creates a new preferences file.
I doubt that this will fix your problem, however, it is always the first thing to try. If it does not, take these steps:
- Uninstall Photoshop Elements
- Run the Windows Installer CleanUp Utility (http://support.microsoft.com/kb/290301)
- Reinstall Elements
- Reinstall the 5.0.2 patch
Good luck,
Juergen -
Although my ipod shows the number of steps, calories, and time, it no longer is saving it to the history. Also when I open the history it takes me to May 2010 instead of the current date. Any ideas on how to get it to start recording the history again?
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
The missing apps could have been done by setting the Restrictions that can hid those apps. If the backup was made with those retrictions set the the Restrictions are also restored.
Thus, if you get it to work restore to factory settings/new iPod, not from backup
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store -
After upgrading to iOS 5, my iPhone 4 takes a very long time to open digitally signed emails. I've tried with the SMIME settings enabled, but that doesn't help either. Any ideas on how to resolve this? Thanks in advance.
I suspect you may have a corrupt photo or image that is causing the sync to fail or quit. You might want to try removing all of your photos by deselecting them in iTunes then sync - and try adding them by each sub-folders until you are able to nail down which sub-folder of photos, that causes the sync to stop or gives you errors.
-
I am running Windows 8.1 and installed itunes and it worked fine for about 30min. and then icloud started and the itunes and icloud just quit. Tried to run itunes again but got a message "a problem occured and needs to shut down" then it shuts down. I have tried reinstalling but get the same problem. Tried uninstalling and reinstlling but it does the same thing.
I am running Windows 8.1 and installed itunes and it worked fine for about 30min. and then icloud started and the itunes and icloud just quit. Tried to run itunes again but got a message "a problem occured and needs to shut down" then it shuts down. I have tried reinstalling but get the same problem. Tried uninstalling and reinstlling but it does the same thing.
-
Screen Saver doesn't allow SOURCE SELECTION but automatically begins to download unknown files. I have to force quit, but it does the same thing each time I try to select a source.
Do you realize that you're talking to yourself?
iMac refurb (27-inch Mid 2011), OS X Mavericks (10.9.4), SL & ML, G4 450 MP w/Leopard, 9.2.2 -
When firefox updates, I cannot re-open it. It appears in the dock at the bottom, then disappears. I uninstall, re-install, but it does the same.
It opens after initial install of 3.6.8, but as soon as I add the roboform and downthemall add-ins it restarts and won't open again.
I have had these add-ins for awhile without issues, but for the past two days, I have had to reinstall it twice, and this time it won't work.hello leehuiling, what kind of security software are you using on the computer?
-
Hi My Iphone 4 keeps on turning off with no reason and there is no way of turning it on. any advice of how to get it working?
I guess but that was what I was on earlier but it wasn't of much help.
I need to chat with an apple person but don't know how if I don't have a phone accessible.
Is there a way to connect thru a laptop or something? -
i am the first owner of my iphone i erase all data and i am trying to open the phone but its does the same thing like the first photo and i cant find my first apple id because i have deleted the email i used for it because i maked a new one please help
Why do you need to access your email? To reset the password?
If you're trying to change the password, you don't need to go to your email. If you know the answers to your security questions, you can reset it without using an email, as explained in the first section of this article: http://support.apple.com/kb/HT5787. If you don't, you can contact Apple for assistance by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Lost or forgotten Apple ID password. -
my ipod touch 8gb keeps freezing everytime i press something and it never lets me listen to music , i tried to restore it millions of times but it does the same thing
How much free storage space is available on your iPod Touch?
When restoring your iPod Touch with iTunes, did you restore from the backup for the iPod Touch or as a new iPod Touch?
If the former and the problem lies with the data included with the backup, restoring from the backup will also restore the problem putting you right back where you started. -
Hi, new ipad2 user. Recieve some emails that should have images but in their place are question marks. any advice on how to fix this would be great. thanks alot..brad
On your iPad - go to Settings>Mail, Contacts, Calendars>Load Remote Images>On. Try that first.
You can also try a reset. Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail and all other apps. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Maybe you are looking for
-
Ora-00604:error occurred at recursive SQL level 1 and Ora-04023
hi all i am using oracle linux 5.5 and oracle Database 11g R2 while shutingdown the database i am getting the following errors. SQL> shutdown immediate; Ora-00604:error occurred at recursive SQL level 1 Ora-04023: object select count(*) from reg$SQL>
-
How can i print a list of bookmarks or extract bookmarks with number paper to print?
How can i print a list of bookmarks or extract bookmarks with number paper to print?
-
Right now i have an ipod 4, and i was wondering if i could trade it in and get the 5. I dont mean to just swap, but to get like 100 or 200 dollars off the 5th gen...
-
Hi, I have created a new report program.Now I need to run this report using a Z transaction code.How can I assign a tcode for this report?
-
Disable SMTP command security filter on router 1812
Hello, I have configured a Cisco 1812 with a SMTP server.I NAT SMPT port to server and I open port on firewall policy. It's all right. The problem is: - A OUTLOOK client, can't send mail con AUTH commands. - Any other clients (web client), send mail