When I Shift Right Click, I get a java error pop-up. FF 4.0
If I use the Shift Right click to open a link in a new window I get a pop-up error screen. If I close that pop-up my link opens OK on a new window
Using FF 4.0 Mazilla Firefox Yahoo! Edition
yahoo - 1.8
A few hidden preferences to check to make sure that the jump lists are enabled:
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# In the filter box type '''browser.taskbar.lists''' this should bring up a few preferences
# To enable all parts of the jump list, make sure the following preferences are set to '''true''', if they are not double-click to them to change their value
## browser.taskbar.lists.enabled
## browser.taskbar.lists.frequent.enabled
## browser.taskbar.lists.recent.enabled
## browser.taskbar.lists.tasks.enabled
Similar Messages
-
ALV Grid Display - Dump when exporting (via right click)
Hi,
We have an ALV filled with a dynamic table because we needed dynamic columns. Our ALV has totals and subtotals. When exporting ALV via right click I get the following error:
OBJECTS_OBJREF_NOT_ASSIGNED
I observed two facts:
1.- If I disable subtotals and totals (commentig wa_cat-do_sum = 'X') export works properly, otherwise I get the dump.
2.- Having totals and subtotals enabled, if I use export icon (top toolbar) the export works properly, but using right-click export gets the same dump.
Our fieldcat is like this:
CLEAR wa_cat.
wa_cat-fieldname = g_cols.
wa_cat-seltext_s = gi_subdiv-btrtl.
wa_cat-seltext_l = gi_subdiv-btrtl.
wa_cat-datatype = 'INT4'.
wa_cat-do_sum = 'X'.
wa_cat-outputlen = '6'.
APPEND wa_cat TO fs_fldcat.
and we call ALV:
* Call ABAP List Viewer (ALV)
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
it_fieldcat = fs_fldcat
i_callback_program = v_repid
is_layout = s_layout
i_callback_user_command = 'USER_COMMAND'
it_sort = t_sort
* i_callback_top_of_page = 'F_TOP_OF_PAGE'
i_save = 'X'
TABLES
t_outtab = <t_dyntable>.
Any help will be appreciated!
Thanks,
JosepHi kat_k,
I tried to do what you say, but I still get the same error!
More ideas?
Thanks!
Josep -
When I press right click -> Open in a new Tab on a bookmark on the "Display your bookmarks" icon that is located on the upper right corner of Firefox 4.0 nothing happens. It only works if I press right click -> Open in a new Tab on bookmarks under the menu that is located on the upper left corner. Is this a bug? Is there a solution?
No its working fine.
Start Firefox in Safe Mode : How to start in safe mode
If it doesn't work
Create new Profile: Profiles -
What happens when I ctrl+right click on a tab header? What does "(*)" mean?
When I ctrl+right click on a tab header, there appears "(*)" before the title of the tab header. I don't see any change in the behavior or properties of the header. What's happend? What does it mean?
== This happened ==
Every time Firefox opened
== Ctrl+Right click on tab headerThat is not a built-in feature of Firefox, but is part of the Tab Mix plus add-on.
What it means is the tab has been selected for merging.
To see what it does have 2 Firefox windows open, in one of them open several tabs then select a few of them so that they have "(*)" displayed in the tab. Now use the Tab Mix Plus merge window option, the selected tabs will be merged with the other Firefox window, and the unselected tabs will just be closed. -
I am trying to convert AAC to mp3. When highlight and right click it only offers to make copies in AAC. HELP!
Hello jepperdee,
Thanks for using Apple Support Communities.
For more information, take a look at:
iTunes: How to convert a song to a different file format
http://support.apple.com/kb/ht1550
To convert a song's file format
Open iTunes Preferences.
Windows: Choose Edit > Preferences.
Mac: Choose iTunes > Preferences.
Click the General button, then click the Importing Settings… button in the lower section of the window.
From the Import Using pop-up menu, choose the encoding format that you want to convert the song to, then click OK to save the settings.
Select one or more songs in your library, then from the File > Create New Version menu, choose one of the following (the menu item changes to show what's selected in your Importing preferences):
Create MP3 version
Create AAC version
Create AIFF version
Create WAV version
Create Apple Lossless version
Have a nice day,
Mario -
I have been trying to open itunes that has already been installed. But, the thing is it never opens and when i do right click and trouble shoot also, it doesnt open. I dont whats wrong with itunes and my comp is 64 bit windows 7. Can somebody please help
no its 64 bit version of itunes. Can you please help me. I am not able to sync my iphone.
-
I am trying to move Acrobat XI to a new computer. (Mavericks to Mavericks) Toward to end of the install when 'scripts' a being installed I get an 'Installation error" message. No number or reason just a message to contact the software manufacturer.
I am using a copy of a previous download of Acrobat XI, clicking the .dmg and then on the install package.
Originally, the Acrobat software was brought into the new computer by the Migration Assistant.
Does the install assistant need to be in the mix somewhere? -
I am using a 2003 eMac and am running on Mac OSX vs 10.4.11. I amrunning iTunes 8.2.1 (6) and not able to upgrade iTunes on this computer. iTunes is not recognizing music I have purchased and when I try to connect when it request me to I get the following error message:
Cannot complete iTunes Store request. A required iTunes component is not installed (-42404)
Please help.Is this music purchased back in DRM days? I don't actually have any iTunes music so I can't test with my iTunes 7.5, but I know that without iTunes 10 you cannot even connect to the store anymore. I wouldn't think that would require an active connection to the store all the time, otherwise how could you play music on a computer in the middle of nowhere? Did you do something to trigger iTunes suddenly wanting to connect and check on machine authorization?
-
Hi, I have a brand new imac which i got today and when I open Iphoto all i get is the error message "Your photo library is either in use by another application or has become unreadable" any ideas? thanks
Are there photos in the Library? If not then just trash it and launch iphoto. It will make a new one.
If there are pics in it then Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
I am running Windows7 on my PVC. When I log in I'm getting two Apple error messages. One says, " The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll." The second says, "Apple Photostreams Uploader has stopped working". Help!
Entry point errors can often be fixed by deleting the offending dll, then repairing the component it is part of. If that doesn't help read on...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2 -
When submitting a target survey I get back an error.... I think this may be a safari problem or mountain lion problem as I used to be able to submit surveys on their survey site. This problem occurs if I use my MacBook Pro or my iPad. I want try to win a 5000 gift card and can't win if I can't submit the survey. It lets me fill out everything and only after I hit submit I receive an error. Target says it's not their problem. I curious to know if anyone else has tried and receive back an error after hitting the submit button.
Thanks.....I'll try that the next time I get a new receipt from target. My old receipts are older than 72 hours now so I can't try Firefox with them. I appreciate the response and will certainly try this and post a reply if I was successful in submitting the target survey.
-
After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
Thanks!After right clicking the Firefox Icon, a window pops up above the icon with three sections in it. Two are titled, they are "Frequent" and "Tasks."
The "Frequent" section each time I see it, has added previous sites that I have visited. This list then has lots of duplicates in it. I do not need that, and would like to keep this listing a a favored few.
Is there a way to stop having superfluous web-sites added to the "Frequent" list ??
Thanks! -
When i run my program, i get the following Error:
" Error 7 occoured at Open File+.vipen File.
Possible reasons:
Labview: File not Found .
or
NI-488: Non-existent board.
Please Help?In my experience it usually happens when one of my sub VIs is trying to open
a file and can't find it. (We don't use the NI-488 boards, so for us, the
error is due to a problem opening a file. If you are using GPIB boards, the
problem might be due to a missing GPIB board.)
Hope this helps.
Jim
matrix wrote in message
news:[email protected]..
> When i run my program, i get the following Error:
> " Error 7 occoured at Open File+.vipen File.
> Possible reasons:
> Labview: File not Found .
> or
> NI-488: Non-existent board.
> Please Help?
>
> -
I have a iPhone 5C and a PC with Windows Vista.I did pair my phone thru Bluetooth but when I try to connect I get this message:"error establishing connection" What is the reason of this?
Go into Settings>Messages>Send and Receive and make sure that your phone number is checked and iMessage reads as activated. Remove the checkmark from the email address and make sure that only the phone number if checked. It should appear grayed out, but should still have a checkmark. If the phone number does not have a checkmark, then turn off iMessage, wait a few moments and then turn iMessage back on and make sure that it activates.
-
I just got the Droid Turbo. I deleted several emails yesterday and now today, I am not receiving any. When I try to refresh, I get an internal error. I have tried turning the phone off and checked my settings as well, but still getting nothing. Any ideas??
I figured it out. Deleted and re-added the account.
Maybe you are looking for
-
Error Message when trying to open photoshop 8, then closes
I don't know how to stop this problem from happening, I cant get into the program to change any settings or troubleshoot. I have uninstalled and reinstalled after restarting my computer and the same problem is still happening. I don't know what to
-
Is it possible creating a report not based on a table?
In APEX I've always created form on report so as to have the list of records of a table and the possibility of inserting/updating every sinle record by means of the form on it, ok? I have an application concerning classic costumers, orders, ... with
-
How? List All Resources in Classpath
Is it possible to list all resources provided to the runtime environment through the classpath? Of course, we can specify specific classes using Class.forName(), ClassLoader methods, et al. However, I would like to know a complete list of all resourc
-
Buying iPod Classic in UK for foreign user.
I would like to buy an iPod classic in a UK retail store, but the computer/itunes account that will use the iPod will be foreign (EU), will it work? If so what about the warranty and are there other things to keep in mind?
-
After installing a iTune upgrade I'm getting this error message
iTunes could not connect to the iTune store. Make sure your network connection is active and try again. Anyone have any ideas?