When I start a phone call, noboby can hear my voice . Only when I click on speaker  voice can be heard at both ends.

When I start a phone call,nobody can hear my voice and viceversa. Only when I click on speaker , voice can be heard at both ends.

Return the darn thing!
Why do you & we accept a phone that does not work 100%
We should be discounted the non working percentage, or simply get a new working one.
Would you accept a saucage with a rotten end, and hope they would treat it with enough chenichals to make it taste and look good?
The problem seems to me a hardware problem, and may be poor assembly. Noticed that incoming calls on my first 4s when vibrator was on, made an extra vibrating noise - i.e. loose speaker, printboard or what do I know.
This does not occur on the phone I purchased yesterday, waiting for the other at the repairshop.
Does Telenor and Apple think I will accept the repaired brand new phone?
NOT!
TCB

Similar Messages

  • I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    YOU can't fix it.  But you can bring it in to Apple for an out of warranty replacement for $199.

  • Iphone is disabled and old will allow emergency phone calls, how can I enter password

    iphone is disables and will only allow emergency phone calls, how can I enter a password to unlock it?

    Just restore it by putting the phone into DFU mode. You will loose every thing but it will be back to normal pal
    Press and hold power and home button together for 10 seconds by connecting it to cable, leave the power button but keep holding the home button for 30 seconds and it will go into DFU mode. Open Itunes and just perform a restore or update

  • Since updating to 7.0 on my iPhone 5S I am not receiving phone calls, but can receive text messages.

    Since updating my iPhone 5S to 7.0 I can't receive phone calls, but can receive texts.  Why?

    double check settings - do not disturb - off

  • Can someone please help? Recently just had my iPhone 4S reconnected. I've now waited the 24 hours that you need to wait till everything goes back to normal. However on a phone call I can hear whoever I'm calling but they can't hear me?

    Can someone please help? Recently just had my iPhone 4S reconnected. I've now waited the 24 hours that you need to wait till everything goes back to normal. However on a phone call I can hear whoever I'm calling but they can't hear me?

    i had the same problem a few weeks ago and i had only had my 3g iphone for a few weeks. It was as if i was on permanent mute. I could hear others fine, but they couldn't hear me, even if i used speakerphone or even a bluetooth.
    i took it to an apple store and they did a real quick test (they first did a system restore, then they took my phone and tried calling another employee). Once they validated it wasn't working, they replaced my phone quickly with no questions asked. Just make sure to back up everything on I-Tunes before you go in so that you dont lose any info. might want to do the restore before you go in, as well, otherwise you'll have to wait for them to do it at the store, which takes them 15 mins or so.
    Hope this helps.

  • I have accidently deleted all my recent phone calls. Can I retrieve them

    I have accidently dleted all my recent phone calls. Can I retrieve them and if so how?

    no youcant retrieve it but what you can do is you can see all the calls list on your mobile bill if you want to note down any number

  • When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

    When I answer my phone calls the sensor doesn't work, so it keeps going to speaker or mute. How do it ensure my sensor works

    Remove all apps from multitasking bar. Double click Home button then tap and hold an icon and tap on little x on every app. Then reset. Hold down Home and Power button until Apple logo appears.

  • HT201401 My iphone 3GS keeps freezing and showing the apple logo during phone calls.  Can anybody help plese ? Bee

    My iphone 3GS keeps freezing and showing the apple logo during phone calls.  Can anybody help plese ? Bja

    Hiya thankyou for the answer.
    Trying to set it up as a new device but can't find the backup to save it.
    I have no "mediasync" folder in my library/application support. Did these folders get moved around with Lion?
    Thankyou again,

  • How do I change the settings so that when I make a phone call I can make my screen go black and not mute the call with my cheek or it tries to face time my call. I need to change the sensitivity or something! Please help!!

    How do I change my phone settings on my iPhone 5 so that when I make a phone call while I am on the phone call my phone stays lit up. It never goes black so I am constantly hitting other buttons while I try to talk like mute or FaceTime or speaker! Please help this is so annoying! It's like all I need to do is fix the settings somehow and I have gone through all of my settings and I can't find where to do this!

    Is the phone in a case?  Try taking it out of the case.  If that doesn't work, then your proximity sensor is broken.  You'll need to bring your phone to Apple for evaluation.

  • IPhone 3G OS 3.0 (not able to start / receive phone calls)

    Since I've updated to iPhone OS 3.0 I can't make phone calls via the "normal" cellular network. When my iPhone is on the 3G network everything works fine.
    When my iPhone is on the "normal" cellular network with full signal and I try to make a phone call I get the "call failed" message after 10 to 20 seconds.
    When the iPhone shows it's connected to my provider via the "normal" cellular network and people try to call me they reach the voice mail
    Sometimes I can make a phone call via the "normal" cellular network and then after a couple of minutes the connection got lost and I get the "call failed" message.
    Sometimes I can make a phone call via the "normal" cellular network and then after a couple of minutes I can hear the other side of the connection but they can't hear me anymore.
    Sometimes I can make a phone call via the "normal" cellular network and then after a couple of minutes the other side hears my voice "scrambled" and the connection gets lost.
    And again, when my iPhone is on the 3G network everything works fine!
    With iPhone OS 2.2.1 everything worked fine but after the update to iPhone OS 3.0 the problems started
    I tried to restore the phone now for a couple of times without restoring the backup but nothing seems the solve this issue. I tried with different SIM cards (iPhone is sim-lock free, Belgium iPhone) but all with the same issues. At this time I don't use the iPhone anymore and switched back to my old phone "Sony Ericsson K750i" because otherwise I want be able to receive phone calls when I'm in a area where there isn't any 3G network available.
    Apple please fix this issue, I've got my iPhone for the "Phone" part, not the "i" part.

    I have exactly the same problem with my Q-Three and 3GS 3.0. I haven't found a solution. Motorola bluetooth works fine. Previously used the Q-Three with a Samsung T919 without issue. Looks like a compatibility issue. Lots of problems posted in the blogs with iPhone and Bluetooth... If you figured it out, please let me know. Thanks.

  • HT204387 When I connect my Iphone 5C to Blue tooth it gets connected but only I can hear incoming voice. The called party cannot hear my voice. may i have the solution please.

    I have just bought this expensive phone. I tried connecting to Bluetooth car kit. It gets connected but only incoming voice can be heard. No voice goes out from Iphone.
    I also tried connecting to Samsung Bluetooth but the problem is same. There is only in coming communication and no out going.. But both the Blue tooth devices works fine with my Samsung SII.
    A working solution help will be very juch appreciated. Thanks in advance.

    I'm having the same problem. I had a plantronics 975 (which I lost, sadly). When connected, the ringer would always be routed through the bluetooth and the iPhone's external speaker. When in silent mode, the iPhone would only vibrate, but I could still hear the ringer in the bluetooth.
    I just bought a new Plantronics Voyager+. Now when it's connected, all sounds are routed to the earpiece - including the taps, etc. The iPhone's speaker doesn't ring at all, unless the bluetooth is disconnected or powered off. I'd really like to be able to hear both, like I was before. This is an iPhone 3G running iOS 4 (latest version, not sure what it is exactly). Haven't updated software/firmware in between bluetooths, just changed the earpiece.

  • I´ve got an iphone 4 and during the phone calls i can hear but i can´t be heard. any idea how to repair this?

    During calls with skype or viber the other person can hear me but during normal phone calls my voice doesn´t sound. What can i do?
    thank you

    The iPhone 4 actually has 2 microphones, one on top and one on bottom.  The apps you're trying to make calls with might be using a different mic than the one that normal calls go through.  Check that the microphone mesh covers, and top microphone hole are not clogged with lint or other debris. 
    If the microphone mesh or top microphone appear clogged, please use a clean, small, dry, soft-bristled brush to clean them.  Use the brush to carefully and gently brush the speaker and microphone mesh.

  • Phone call recipients cannot hear me

    iPhone 4s-new.  When phone calls are made I can hear the person answer but they cannot hear me.  Also when they call me they hear the phone ringing and when I answer they cannot hear me.  Checked volume and mute and all is ok, volume is up and mute is off.

    same here with me besides Im no longer in US. Im back home to İstanbul and here is no apple store where I can ask for a new phone. Such a shame for Iphone

  • Making phone calls and not hearing anything

    Anyone else having this issue?  I call my wife, same RAZR Maxx phone, and sometimes I hear her ringback tone, and sometimes I do not.  And she has the same issue on her end.  Only been since the Crappy Bean update.

    I've been having the same issue for days now, it seems like the problem just cropped up over a few days, progressively getting worse. See if Siri can simply dial a number : "Siri, dial 555-555-5555"
    If that works, as it did for me, I thought "maybe my contact interface with Siri is screwed up." So I turned of Contacts under Settings -> iCloud. When the phone asks you to keep or delete the contacts on your phone, click Delete Contacts. Don't worry they're still in iCloud. This could take a few seconds.
    Then turn Contacts back on under Settings -> iCloud. Click Merge when prompted.
    Next go into Settings -> Siri -> My Info and select *your* contact info to tell Siri who you are.
    Then try asking Siri to call someone.
    Let me know if this fixes the issue for you as it did for me. :)

  • When I get phone calls I can barely hear. Has anyone had this problem? I turned up the volume.

    I have a friend who bought the IPhone 6 and can barely her the person on the other end when they call.  She turned the volume up.  I can't think of what to do. Please help.

    Megster007,
    Let's boost the audio on your phone.  When did this issue begin? Have you powered off your phone and then on?  Do you have a case on your phone?
    EmmaM_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the �Correct Answer� button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Maybe you are looking for