When i start my labtop i get message please run system diagonistics and its show hard disk 1 fault?
HP MINI 10 INCH NETBOOK WITH GENUINE WINDOWS
WINDOWS 7
ERROR MESSAGE :HARD DISK 1 FAULT:
NO
Hi,
The error would indicate that your Hard Drive is failing and will need to be replaced.
If your notebook is still under warranty, contact HP and arrange to have the drive replaced - you can check your warranty status Here.
If you live in the US, contact HP Here.
If you are in another part of the world, start Here.
If you are out of warranty and would like a guide on replacing the Hard Drive yourself, please let me know - include the full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Similar Messages
-
Replaced motherboard and when I started the computer I get no boot screen
I have a HP media center m7463w. I am running Windows Vista Home Premium. My computer crashed and I replaced the power supply when I restarted I had a blank screen (not even a boot menu option), Therefore I felt that replacing the motherboard was the next thing to try, I put a used
Asus HP Compaq LGA775 motherboard 5188-5465 P5LP-LE
in and still got the same result (by the way I've replaced the motherboard once before and when I restarted I got the error message "No Operating System Found" and all I did was re-install Vista Prem. and had no problem until now.)
The only message I receive is from the monitor telling me no signal detected (DVI or VGA) and the monitor was going into sleep mode. I know that the first thing that comes to mind is that the graphics card is bad. My wife also has a HP Media center m7760n which is basically the same computer also running Windows Vista Home Premium. So I've switched monitors and put my graphics card into her computer and they work fine.
I've tried HP's resetting the BIOS even when you have no picture. I've replaced the CMOS battery after leaving the battery socket empty with nothing attached to the computer for 10 hours. And lastly I have removed and reset the pin in order to clear the CMOS. By the way when the problem first appeared I DID put in my recovery disc and restart. The CD/DVD drive is working. HELP!!!Did the computer technician identify what the issue was in this case?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
It says: "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
"iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process.
Any advice????With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck -
when i start I tunes i get this message , The registry settings used by Itunes drivers for importing and burning CD'S and DVD's are missing please reinstall..ive reinstalled 5 times ,all 5 clean installs ...still dont work with Iphone 3 ..
Same problem as me. No answers though. Also I can't access the itunes store. There is something missing in the registry but what? Seeing as your post was sometime ago it looks like there is no help.
-
when opening PS CC 2014 I get message "The program can't start because ONCoreFoundation8.dll is missing from your computer. Try reinstalling the program to fix this problem". I did and still get same message.
Win 7 64bit, have PS cs6, pscc. pscc2014. also Lightroom 5.5 (just upgraded to 5.6). Also the latest updates for all Adobe programs. But still get
But the program does start and seems to work well. But annoying as hell!!!
Also don't understand why there is pscc2014 rather than just updating pscc??
Thanks,
Bob Lurie -
I have a computer with windows 8, when I plug in IPOD Touch, get message can't download pictures, no music library appears or icon. Any suggestions?
Hello,
I am currently an owner of an Ipod Touch 4th generation. I see you are having problems with your Ipod/Ipad/Iphone, so I will try to find a solution to your problem.
Hard Reset: Hold down the Sleep/Wake and Home buttons for at least 10 seconds or until Apple logo appears
Make sure you have Itunes downloaded
Make sure Itunes is the latest version
Hope that helps!
If none of the above solutions work, can you please respond back ASAP as I will try to find another solution to your problem (This might even help others with the same problem!)
Cheers!
Pizza98704 -
When I start Firefox, I only get the background of my browser in the Firefox window. I the normal window for 1 second, but then it changes in only the background window. So without toolbar, or navigation. I already reinstalled it, but that doesn't fix the problem.
Try to disable hardware acceleration in Firefox.
Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
https://hacks.mozilla.org/2010/09/hardware-acceleration/
https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers -
Question
I have Windows 7 Home Premium. When I start Firefox 4, I get a User Account Control warning, "Do you want to allow the following program to make changes to this computer"? Is there a way to stop this warning?Check that you do not run Firefox as Administrator.
Right-click the Firefox desktop shortcut and choose "Properties".
In the Compatibility tab, make sure that Privilege Level: "Run this program as Administrator" is not selected.
Also check the Properties of the firefox.exe program in the Firefox program directory. -
when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP in English
== This happened ==
Every time Firefox opened
== start mozila firefoxThis issue can be caused by a problem with the file c:\windows\system32\dwmapi.dll
The file dwmapi.dll is a Vista file and should not be present in Windows XP.
See also [tiki-view_forum_thread.php?forumId=1&comments_parentId=417674] -
When I start the computer I warning message flashes but I can't see what it says
When I start the computer I warning message flashes but I can't see what it says
With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the libxml2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Restart the programme all should be well
In case that your OS is (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "libxml2.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "libxml2.dll" to the location.
5. Restart the programme, it should not display that message, it should be clear.
Good Luck -
Nikon 300S. It is set to NEF(RAW) + JPEG fine. When I import to Lightroom I get message "There was an error working with the photo? Does anyone know why or how to correct?
I don't know the answer, personally, because I don't use Lightroom. This is the Camera Raw forum.
Someone here might answer your question, as there are a lot of clever people here, but, if not, you might try here:
Photoshop Lightroom -
when i start the itunes the following message appears: is not possible start the program because msvcr80.ddl is in fault in the computer. try reinstall the program to solve this problem.?????????????????????
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks! -
When I upgraded to Windows 7 I was told to uninstall iTunes and its helper services. Now when I try to install it I get a message that says "the files I'm trying to install are not native to this program. Is this being blocked by Windows 7 security that I'm not used to. I'm not using the Windows firewall. How do I find what process is doing the blocking. Any ideas would sure help. Rex
I understand where you are coming from. I had the Ultimate Tier at one point, but I didn't watch alot of those channels so I downgraded.
Another problem with changing my tier back up to Ultimate is that I was told I would lose the discounts associated with the package I have now. The discounts won't transfer to the new package and they can't give me an equal amount of discounts with a new package. At least with the Sports Pass, it is an add on like HBO, so you can cancel at anytime with no penalties or changes to your plan.
Verizon does advertise the Sports Pass on its website. Here are the channels. The only ones I would be interested in would be beIN and ESPN Classic, since I will be losing that channel sometime in May since I only have the Extreme tier.
beIN Sports HD
CBS Sports Network
ESPN Buzzer Beater HD
ESPN Goal Line HD
ESPN Classic
HRTV
Longhorn Network (Outside of Texas)
Outdoor Channel SD/HD
Sportsman Channel
TVG
World Fishing Network SD/HD -
When I start my macbook I get the gray screen and gear. I've tried to safe start it and it sounds like it's going to start but then shuts down. I don't have any other products connected to it. Any suggestions?
Did you recently install any updates?
Do you have your original install discs?
~Lyssa -
My iPhone is skipping back to the start of a song every time I unlock it, especially when I am replying to a text message, this is very frustrating and just want to know if it is a simple bug that will be dealt with in the next update?
Assuming the phone isn't jailbroken, the basic steps (as needed) are:
Restart phone (you already did this)
Reset phone
Restore phone in iTunes using a backup
Restore in iTunes as new, without using a backup
See appendix B of the User Guide for details
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
If your phone is jailbroken, this is the most frequent cause of the problems you described. Restoring could permanently brick the phone.
Note that your iOS is old and the current version is 4.2.8. It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday.
Maybe you are looking for
-
How to include metronome in export?
Is there anyway to include the click in the mix when I export it to iTunes? Also are there metronome functions...ie. how to make it louder or quieter...different kind of click sound.
-
Im having issues with cds not reading on my computer. trying to load into itunes but the imac doesnt seem to read them. It just ejects them.
-
CVD not to be loaded on Inventory in MIRO
Hi, In our case, we take CENVAT, hence we want the CVDs not be loaded on to the Inventory. What do we need to do for the same? Pls. note that we have not activated the excise, as we are basically into Service. Regards,
-
Check Price variance between IR and PO
Hi, Our purchasing process is GR-based IV, hnce PP tolerance checks IR amount against the GR amount. Is there any tolerance key or any means we can do, not check the IR amound against GR amount but rather check IR amount against PO amount? Regards, A
-
How can i convert my song into .mr4 for making it my ringtone, just renaming it is not working?
how can i convert my song into .mr4 for making it my ringtone, just renaming it is not working?