When I start up, desktop went back to OG and didn't ask for my login...
When I started my computer, it removed my desktop wallpaper and put back the original snow leopard wallpaper and it also doesn't ask for my login when I start my computer. What's up?
Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. When it comes up is your Hard Drive in the list on the left?
If it is, then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've clicked on the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.
After repairing use Startup Disk from the same menu to choose your hard drive for restarting from your hard drive.
Similar Messages
-
when ipod starts up, shows usb cable to connect to itunes then asks for my lock password but cannot get into ipod to put in password. any ideas?
You may need to connect the iPod in Recovery Mode and then restore it via iTunes. See this article for instructions on getting your iPod into Recovery Mode.;
http://support.apple.com/kb/ht1808
B-rock -
i am trying to get my apps on my iphone and when i click sync it says backing up files and it takes hours for it to go up but it says can't finish back up wat do i do
dplum12
What computer operating system is your Premiere Elements 12 running on? Did you have the opportunity to update 12 to 12.1 Update yet using an opened project's Help Menu/Update? If not, please do so when you get the opportunity.
For now I will assume that your computer is Windows 7, 8, or 8.1 64 bit. Please try the following suggestions to overcome your Premiere Elements Sign In issue.
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
and, if you get any messages about Internet connect and the computer clock, please review the following
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
Please let us know the outcome.
Thank you.
ATR -
The seller did not restore the phone and when I tried to do it manually it locked the phone and is now asking for the login info in order to do anything with the phone. I contacted the seller and he is not responding. What do i do?
he knows his ID , if he did all whats in the link he can get his password back ?
how can i make him call applecare ? is there a way to speak to them from jordan ??
i have been trying to reach any1 in apple so they can communicate and help my friend (us) to make him remember it .
am not asking for the password or trying to get into the phone without using it , and i can take my money back though i need to help my friend as well since now he cant use it as well.
thanks kil -
I bought an iphone 5 c off craiglist and when I got home I factory reset the iphone and now it ask for an Apple ID of the previous owner but the previous owner won't give it to me
Find My iPhone Activation Lock- Removing a device from a previous owner’s account
Only the former owner can remove the Find My Phone lock and erase the device. That can be done remotely. Without this the device is useless to you because it will be permanently locked. -
I recently did a backup and restore on my Iphone4 because iI was going to switch carriers. When I switched carriers I went back to I tunes to restore my backup and nothing was there .Some how I lost all of my data, is there a way I can retrive my data or not? I had all of my pics and contacts on the backup. please help..
When you say nothing was there, do you mean the backup wasn't there?
-
i downloaded a movie on itunes and turned my computer off and when i turned it back on the movie wasnt there so i went to re download and it says check for available download and it still won't let me down load it. what do i do?
Hi runner_girl7585,
Thanks for using Apple Support Communities. If you weren't ever able to watch your rental movie, you can report this to the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
http://support.apple.com/kb/ht1933
Cheers,
- Ari -
I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
I upgraded my cloud storage from 2G to 120G and today it went back to 2G and I cannot save my work. Anyone experience this? Unable to get any customer service.
Purplehiddledog wrote:
I do backup with iCloud. I can't wait until the new iMac is available so that I can once again have my files in more than 1 location without needing to rely solely on the cloud.
I also rely on iTunes and my MacBook and Time Machine as well as backing up to iCloud. I know many users know have gone totally PC free, but I chose to use iCloud merely as my third backup.
I assume that the restore would result in my ability to open Pages and Numbers and fix the problem with deleting apps, but this would also mean that if my Numbers documents still exist solely within the app and are just not on iCloud for some reason that they would be gone forever. Is that right?
In a word, yes. In a little more detail.... When you restore from an iCloud backup, you must erase the device and start all over again. There is no other way to access the backup in iCloud without erasing the device. Consequently, you are starting all over again. Therefore, it would also be my assumption that Pages and Numbers will work again and that the deleting apps issues would be fixed as well.
If the documents are not in the backup, and you do not have a backup elsewhere, the documents could be gone forever. -
I have had it for 2 weeks now, got it brand new at the apple store, it freezes all the time, and reboots itself, sometimes when i start it, purple dots cover the screen and i have to hold the power button. a 2 week old computer is not supposed to do this! it wastes all its time being so flashy that it just craps out all the time. sometimes i feel like i should have stayed with my virus covered PC. at least when it shut down randomly you could turn it back on, but with the macbook pro, it just keeps restarting itself over and over. need help with this, any answers?
Here's a novel thought. Take it back to the vendor. Should have done that one week ago.
-
We have developed a desktop application using Flash software and published the same for MAC environment. When we double click on the index.app file, the application is working perfectly in Mac 10.6.7 at our office. But if the same index.app file is double clicked in Mac 10.6.7 at out clients location, its not opening. For your information the client is able to open this same application by double clicking on index.swf file. The main problem is that client is not able to open the application using index.app file at their office whereas we are able to do so at our office. Can anyone give some suggestions to sort this problem?
The most common reason is different versions of Flash, or different versions of web browsers used. Some users may elect to not have Flash installed at all because of the processor overhead of Flash. If you are going to make an application for a client, check what operating system and browser versions they are using first. Then determine if a stand alone application is required, or if they have the necessary plugins to run specific browser enhanced code.
P.S. MAC is an acronym for Media Access Control. Mac is the shorthand for Macintosh, the operating system and computers made by Apple Inc. -
my battery went dead- I plugged in it. several hours later I went back to it and it wasn't on. instead the only thing on the screen was a picture of the plug in and the icon itunes on top of it. I have no idea what that means. My phone will not turn on even after I hold both buttons. i was told a while back that the i7 program can mess this up and to hold both buttons down to reboot the phone. I tried this but even this isn't working. Any ideas?
You need to do this http://support.apple.com/kb/ht1808
-
I have Adobe Photoshop Elements 8 for Windows 7. I need to re-install it because my computer crashed. I saved the outer box, but I do not see a serial number and it is asking for it when I am trying to install the CD software. I went online, but the only serial number I see is when I registered the Photoshop Elements 2.0.
The serial number will be on the disc case, not the outer box. Find your serial number quickly
-
I have restored my new phone from I cloud but when I connect to my PC to put some music on it asks for set up as new phone or back up from a date from iTunes that is too old. Help it's doing my head in
Select setup as "New", the next screen should prompt you to rename your phone. Just name it what you already have it named. After that, you should be able to sync and all of your data & settings will still be exactly as you've already set them up on your phone. The message is more threatening than what really happens.
-
When I synced my iphone to our computer, it took on my husbands apple id account and now it asks for his password to update apps. How do I get mine back?
Yes, you can delete them from your phone by tapping the icon until it jiggles, then tap the black x. You can verify that your Apple ID is still correct for future purchased by going to Settings>Store>Apple ID (at the bottom). If it's wrong, tap the ID shown, sign out, sign back in using your ID. Then you should be good to go.
Maybe you are looking for
-
Is there a way to take several photos amd merge them into a panorama with Aperture? I know Photoshop can do it, but I'd like to try it in Aperture, if possible. Thanks in advance!
-
Use Row Selector in PL/SQL Function
Hi all! I want to use the ROW SELECTOR from a Tabular Form in a PL/SQL Function or Anonymous Block. In Detail I want to find out which Rows got checked and then do specific operations to them. Thanks in Advance. Regards Kai Eilert
-
Server Configuration - Limitation
Environment Details: XI 3 Build 12.1.8.1176 OS : Windows 2003 R2 SP 2 Standard Edition Memory: Xenon X5355 -2.66 GHz on VM - 4 GB RAM Number of Web I Process - 2 on 1 machine. Development approch taken is, refresh reports, store as Web I with data,
-
Problems with macbook pro abroad URGENT
Hello everyone, my name is Tobias and I am a new macbook pro user currently studying abroad in Barcelona, Spain. I had a great two month start with my mac and then all of a sudden, it stopped charging. Everything was working fine, then it died and th
-
Hi, We are on SRM 7.0 and using ROS for registering new vendors. ROS client is different from the SRM client. Once the vendor has filled in the ROS_SELF_REG form and submitted it, the words "Logged on" are displayed. Is there any way I can change thi