When I start up FCPX, the timeline and the clips don't highlight in yellow. I have to double-click to get them to highlight and it's in white. What's this all about?
The system seems sluggish, as well. I can't find anything in help that describes what this is all about.
Are you using the Select tool when trying to click on clips? Might try hitting "A" on the keyboard just to be sure.
~D
Similar Messages
-
The voice that was on when I first set up my ipad came back on and now I have to double click to get into my apps and can't use my apps because her voice is talking. How do I make the voice stop and my IPAD work again.
If you've turned VoiceOver on then see if triple-clicking the home button turns it off, and then change what Settings > General > Accessibility > Triple-Click Home is set to.
Otherwise, via 'the touch to select double-tap to activate' process you need to go into Settings > General > Accessibility > VoiceOver and turn it off
The manual (http://support.apple.com/manuals/#ipad) also says that you should be able to switch voice-over off by connecting to your computer's iTunes :
Turn VoiceOver on or off in iTunes: Select iPad in the iTunes sidebar. In the Options section of the Summary pane, click Configure Universal Access. Select VoiceOver, then click OK.
So select Configure Universal Access at the bottom of the Summary tab and set Seeing to Neither -
I have frequent instances of my Macbook Pro beeping 3 times and then I have to forcefully shut it down by pressing the power button. What is this all about? Please help. Thank you.
I saw this report being sent to Apple:
Interval Since Last Panic Report: 581719 sec
Panics Since Last Report: 10
Anonymous UUID: F4CF708D-D85C-4EC5-8047-4FC22C6B03AF
Fri Mar 7 13:00:14 2014
panic(cpu 0 caller 0xffffff80002d1208): Kernel trap at 0xffffff800020c590, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0x0000000000000000, CR3: 0x0000000007541000, CR4: 0x0000000000040660
RAX: 0xffffff8000000000, RBX: 0xffffff800d35a870, RCX: 0xffffff800cf55cd8, RDX: 0xffffff80008a8fcc
RSP: 0xffffff805e5f3d60, RBP: 0xffffff805e5f3da0, RSI: 0x000000001dcd6500, RDI: 0xffffff800d168778
R8: 0x0000000000000001, R9: 0xffffff805e5f3e88, R10: 0x0000000000000011, R11: 0x0000000000000000
R12: 0x0000000000000000, R13: 0xffffff800d168770, R14: 0xffffff800d168778, R15: 0x0000000000000000
RFL: 0x0000000000010082, RIP: 0xffffff800020c590, CS: 0x0000000000000008, SS: 0x0000000000000010
Error code: 0x0000000000000000
Backtrace (CPU 0), Frame : Return Address
0xffffff805e5f3a00 : 0xffffff8000204d15
0xffffff805e5f3b00 : 0xffffff80002d1208
0xffffff805e5f3c50 :
Model: MacBookPro8,1, BootROM MBP81.0047.B27, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f99
Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 5.100.198.104.5)
Bluetooth: Version 2.4.5f3, 2 service, 12 devices, 1 incoming serial ports
Serial ATA Device: Hitachi HTS545032B9A302, 298.09 GB
Serial ATA Device: OPTIARC DVD RW AD-5970H
USB Device: FaceTime HD Camera (Built-in), 0x05ac (Apple Inc.), 0x8509, 0xfa200000 / 3
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfa100000 / 2
USB Device: BRCM2070 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 5
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x821a, 0xfa113000 / 8
USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0245, 0xfa120000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2513, 0xfd100000 / 2
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0xfd110000 / 3Hmm. The problem still may be the RAM - Apple buys the RAM it puts in its machines from third-party vendors (usually Hynix) so it could be a RAM problem.
There are a couple of things that you can do yourself before taking your machine into an Apple Store or an AASP... download and run an application named Rember that will run a RAM test for you - let it run for a couple of hours or even overnight. If it turns out that your RAM is faulty, Rember will let you know. If it is faulty, then you have a couple of options - replace the RAM yourself or (particularly if you're under warranty still) take the machine to an Apple Store or AASP and have them replace the RAM.
If Rember finds no fault with the RAM, then you'll need to take it into an Apple Store/AASP and get a free diagnosis on the machine. Three beeps do usually indicate faulty RAM, but if it tests good with Rember you likely have another problem - it could be something as simple as the RAM, somehow, not seated correctly or signs of another hardware problem.
Run Rember first... call back with results.
Good luck,
Clinton -
When i connect my iPhone to iTunes, it says i have to set up my iPhone, and wont allow me to sync any media i have already purchased on it. My phone is not new, so I dont understand? This all came about when i updated the iOS 6 software. I have tried to re-set up my phone but it makes no difference and deletes everything off my phone.
bubblesblom wrote:
Okay, so my friends think it is funny to change the passcode on my iPhone.
Maybe you should get new friends.
I'm not sure that recovery mode works when you have to trust the computer, but did you try it?
If you can't update or restore your iOS device - Apple Support
If that won't work, perhaps you can use Find my iPhone from a computer in your iCloud.com account to erase the device.
iCloud: Erase your device - Apple Support
This has nothing to do with the Find my iPhone app being installed on the phone, but you do have to have Find my iPhone activated in the iCloud settings on the phone. -
My iPhone just said "SIM failure" and now says Invalid SIM in the upper corner. What's this all about? Any ideas on how to resolve this.
Looks like the Sim card had a catastrophic failure. Burnout, short somethng like that.
You can try to take out the tray and reseat the sim card inside and see if that gets it back.
Also try resetting the phone at least once by holding down the home and power buttons until the Apple Logo shows up.
If none of this works you'll have to contact your cell carrier to get a new sim card, as it probably fried and is no longer functional. -
When I tried to use Firefox this morning I got this message with exclamation marks.
"SQlite Version Error The application has been updated, but your version of SQlite is too old and the application cannot run."
What is this all about?? Shall I give up on Firefox?Sorry to hear that. I understand your frustration and I hope they send back a better working N78-3.
Myself, I count myself lucky. Everything works perfectly for me right now...email, bluetooth, maps, gps, 3rd party apps, battery life, 3G, wifi, etc. etc.
The only issue I've been having is the dreaded reboots but I believe that may have to do with 3rd party apps. I recently uninstalled Google Search app from my N78 and since then it hasn't rebooted or shown any issues. This seems odd at first but makes sense if you think about the fact that the Google Search app loads itself into memory and runs in the background at all times.
I did this this past Tuesday night and so far no reboots, crashes or any problems. I'm sure I just jinxed myself but I've been using it heavily over the last few days with no issues. Prior to this, it would usually reboot every 2 days. If it doesn't reboot for another few days I'll be happy.
I would normally not stand for this but I just love the phone and if I got something else it'd probably be the iPhone 3G which has perhaps more software bugs and issues than the N78-3!!
Best of luck. Here's hoping they release an update soon. -
When syncing my iPad with my computer I keep getting the notice ' waiting for changes to be applied '. What is this all about ?
If everything is working OK, I believe it simply means that the iPad and iTunes are communicating and that any changes that you made to the sync configuration are waiting to go through. If you updated apps on the iPad and they get transferred into iTunes or if you download new songs onto the iPad and they are being transferred into iTunes, any app data that moves back and forth - those would be changes that need to be applied.
If you can't finish the sync and that's why you are asking, can you provide more specific details? -
my itunes is playing up. Every time I play a track or album I get a crackling interference noise. It sometimes abates for a while but then comes right back again!What's this all about and how can I stop it?
See if this article will help:
iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
http://support.apple.com/kb/TS1362 -
I have a new Mac pro.... when I plugged in PNY stick drive in the USB port a message came up that said that it was consuming two much power to remove the stick drive... what is this all about. ????
Try a SMC reset:
http://support.apple.com/kb/HT3964
Follow directions for a battery you should not remove yourself. -
Hewlett Packard (HP) Printer Software Update ver. 2.16.1 has auto-installed/downloaded twice within the past few days and now, today, the App Store wants to download 2.16.1 HP Printer Software Update for a 3rd time!?! Same version all 3 times. What’s this all about? Is something acting up or is this normal? Really strange that it'd want 3 copies of 2.16.1....
Please advise what I should do.
I’m using latest Mavericks OSX (10.9.2) on Macbook Pro (mid-2012).
Thank you,
A
Below is a screenshot in case I made no sense explaining the problem above.I don't know the cause and I haven't heard of that before, but
I think you should try some generic maintenence:
Startup from the Recovery Partition, and repair the hard drive and repair permissions with disk utility.
http://support.apple.com/kb/ht4718
(just read the first paragraph) -
Confirming, indexing, creating peak file. What's this all about?
Althought I'm new to PrPro (see my very first post, it was the that I just started using this app), premiere already ate me that anywhere I go, when it comes to video editing, I am in its belly. But still I want an explanation regarding (again) about this message that's appearing in the status bar: 'conforming ?????.mpg". I don't really understand what's this all about. A little explanation is a lot to me. But what I am concerning about this thing is, it seems to be endless. PrPro had done already on all of my assets, conforming, creating peak files, indexing, but it still keeps on doing it again and again. Is there a problem with my audio/video files?
During the first time of my use, I didn't mind. I didn't even notice it. But now I started to be concerned with it since I my pc really slows down when PrPro starts this seemingly perpetual activity. If there's a problem somewhere else please help me.Did you notice that you make the same mistake as one of our regulars here, the_wine_snob, otherwise known as Bill Hunt, in leaving out one 'a' in my last name? I'm not offended but wonder if that is a human trait to not overdo it and two 'a'-s may be too much?
I resemble that comment! Harm, you have to realize that I am from Mississippi, and everyone is known as Billy Bob, Joe Bob, or Bubba. We had no Harm Millaards - too many double vowels and consonants for us. At least this helped, when I signed up for a bunch of X-rated sites, as Harm Millard...
OK, where were we? LameTiger (check that spelling, as I think I got it wrong again and apologize profusely), when one has non-standard footage, three thing need to happen: the files need to be indexed, the Audio must be Conformed (CFA files) and the Waveform Display (PEK) files must be created. Depending on the number of files, their Duration and one's computer's speed this can take from moments, to maybe 20 mins.
If you have not just loaded up this Project, then gone for a cup of coffee, or tea, I urge you to do so. There is a tiny progress bar in the very lower-right of the GUI, that traces this. Let it happen, and be patient. I know that this sounds like a scene from the Karate Kid, but it's important. Many systems will crash, if one tried to do anything, before this process completes. I can work (albeit slowly), during the process. Many cannot.
Now, if you HAVE patiently waited this process out, and it has completed, AND the next session yields the exact same thing, then something is not quite right. Could be files getting moved, deleted, or otherwise not available to PrPro, or some setting in one's Scratch Disks, or some other problem.
Hope that a bit of patience, and a cup of Darjelling helps. Please let us know.
Good luck,
Hunt -
New song download is not compatible? What is this all about?
I just tried to download a song onto my nano and when I went to move it over, a prompt came up saying the song was not compatible with my device. What is this all about?
Wickets924i believe it's because on the "system requirements" it says that if running on vista, it needs to be on a 64-bit system. Mine runs on 32 and doesn't seem to work. it crashed my computer... big time.
I am not computer savvy though... could be wrong. -
Safari is asking us to call 1-866 782-**** because of a security issue. Safari is not currently working. What is this all about?
<Post Edited By Host>Sorry for the second same words reply but I want people to see this is a scam thank you
this conversation has help me, today I had the same pop up scam announcement, I was searching in you tube yahoo and google about this no one apparently had this issue before, first I was going to call the original apple phone number because to me this pop seem awkward but the announcement had the apple name I gave it a try but using the call app phone booth just to see if it was the official apple phone number and if it was not who ever was asking me to call wont get my actual phone number, to my surprise it wasn't apple official phone number because I have called the apple official # and is nothing a like, I hung up all worried and sad with only one option in my mind called the apple support number, then I stop and thought for a minute and one clever thought came to my head that is brain lol, the clever thought was this "let me put this phone number in the web to see if it takes me to the official apple website" so I did it and the first pop up search was this article this conversation of you guys read it and follow the instructions they were very successful fix my issue, thank you so much guys, keep up the great work.
Edit -
After upgrading my software i have seem to have lost all my contacts and photos, i did a back up but i have no idea how to get them back on? maybe im illiterate but i dont know how to find it in my itunes? please help!!
http://support.apple.com/kb/HT5824?viewlocale=en_US&locale=en_US
-
My rue la la app for ipad stopped working. I deleted the app and tried to reinstall it, it is no longer available in the app store and when I research it on safari and find it when i try to install it says that it is not available in the us store. What is that all about?
My app did the exact same thing. It is still unavailable on the App Store and when Rue La La's site directs you to download their app, the "not available in the U.S. message appears. This happened to me last night. The app wasn't working, I deleted it and was just going to reinstall but was unable to find the app. I figured it was some glitch but I have tried multiple times this afternoon to no avail.
Maybe you are looking for
-
Calculate tax item field name in bapi .. bapi_acc_document_post
Hello Friends, Im using Bapi>> Bapi_acc_document_post to post vendor and customer invoices, im not getting mapping field for the "calculate tax item(checkbox)" technical name is xmwst in any of the bapi strucuture. please tell me in which bapi struct
-
I can't go further "waiting for Printer Services" on Mac OS X 10.3 can U?
Evening, I'm a new user, and ocassionally use my iBook.I turned it on but it takes ONE HOUR to get to the prompt Waiting for Printing Services. I was advised to re boot but no success, I guess this all happened after i tried to update latest version.
-
No german umlauts in OHW 2.0.2 topic view
I used OHW 1.1.5 before. Now switching to OHW 2.0.2, in the table of contents the german umlauts are not displayed correctly. The rest of the installation is identical. Its the same OS, the same JDK, the same Tomcat servlet engine and the same client
-
Dear All, May, can you tell what is the basis of debtor Aging Analysis. Wether, it is the posting date or document date which is considered while reporting? More information will also be helpful. Thanks VK
-
I want my old pictures on my new phone
I recently received an iphone for the holidays and love it! Wonderful new and inventive features, but I did not think I would have to part with so many of the ammenities I previously had. I have photos saved on my computer (Windows XP driven HP Pavil