When i start up my computer,it says reader_sl.exe failed to load,it will stop this program app.,ok

When i turn on my computer,it says reader_+sl.exe faild to load,,we will close this program app.,,,OK.How do i repair this.Ive tried everything.I even tried deleteing Adobe reader and re-downloaded the newest version,Adobe reader XI.Whats wrong with my computer?
what do i do to fix this?

Remove the faulty entry 'reader_+sl.exe' from your startup list and replace it with the correct 'reader_sl.exe'. Or just remove it altogether; it doesn't actually do much.

Similar Messages

HT1212 My ipod says Ipod is disabled connect to itunes, but when i connect to my computer it says i must enter passcode.how do i fix this?

help meeee!

Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How to stop tabs re-opening after firefox crashes.........when it crashes and I have multiple tabs open, when re-starting firefox all of the tabs re-open too. How can I stop this?

Firefox crashes quite often, especially when I have multi tabs open. I usually have to use CTRL ALT DEL and end the process as Firefox stops responding.
My problem is not the crashing........it is the re-opening of the multiple tabs I had open, when normally it is one of them (not the home page) that caused the crash in the first place, so I cannot re-open firefox until I restart the pc, because every time I do it is the same story. Firefox tries to re-open all of the tabs and stops responding. I have looked in options but nowhere does it allow me to stop multiple tabs opening after a crash. If this continues, I will have to uninstall Firefox and stick to Chrome.

Set the pref browser.sessionstore.max_resumed_crashes to 0 on the about:config page to get the about:sessionrestore page immediately with the first restart after a crash has occurred or the Task Manager was used to close Firefox.
*http://kb.mozillazine.org/browser.sessionstore.max_resumed_crashes
That will allow you to deselect the tab(s) that you do not want to reopen, but will allow to reopen other tabs.
See:
* http://kb.mozillazine.org/Session_Restore#Restoring_a_session_after_a_crash
* http://kb.mozillazine.org/Browser.sessionstore.max_resumed_crashes
To open the about:config page, type about:config in the location (address) bar and press the "Enter" key, just like you type the url of a website to open a website. 
If you see a warning then you can confirm that you want to access that page. 
*Use the Filter bar at to top of the about:config page to locate a preference more easily.
*Preferences that have been modified show as bold (user set).
*Preferences can be reset to the default or changed via the right-click context menu.

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

ITunes says computer not authorized. When I try to authorize computer it says it is already authorized but will not play song

iTunes says computer not authorized. When I try to authorize computer it says it is already authorized but will not play song. Note. Library was moved from PC to MAC. I am signed in to Itunes with the Apple ID created on the old computer which is different than the Apple ID used to set up the MAC.

I'm experiencing the same thing under iTunes 11.1.1:
iTunes says the computer is not authorized, prompts me to authorize
I enter my credentials, iTunes says computer is already authorized
When I attempt to play song, iTunes starts at bullet point 1 above over again.
My attempted fixes:
I tried everything in this support document, to no avail: http://support.apple.com/kb/TS1389 (Note: I cannot find a SC Info folder on my Mac)
Deauthorize and then reauthorize computer
Delete song and try to redownload from iTunes store - there's only a button that says 'purchased' with no option to redownload it
Note: I am using only one iTunes account, and I double checked the song info - I'm authorizing the correct account - 12 songs from the same album purchased at the same time play fine. As does the song in question - from the finder. Only iTunes stubbornly refuses to play it.
The most odd thing is that iTunes music is DRM free - the song in question was purchased only a few months ago. Thus there's no need to authorize the computer to play it.
I was hoping that iTunes 11.1.1 would cure it - no dice.

Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

hello i have a problem when i start woorksheet, my computer crash with blue screen.
OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
Thanks for your help.

The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
-The Help-->Report information - this will tell us more about the computer, video and installed memory
-Installed hardware - what DAQ devices are you using (exact models!)
-The worksheet that crashes - we need to see how the timing is configured in the worksheet
-What other programs are running at the same time?
-Does the worksheet crash every time?
-Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
Regards,
-cj
- cj
Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

When I connect my iPhone 4s to the computer, it says "USB device not recognized" , how do I fix this?

Look to the right in the MORE LIKE THIS box.

When opening I tunes message came up saying I tunes failed to start because MSVCR80.dll could not be found Reinstalling the application could fix this problem What do I do now?

When opening I tunes - message came up saying I tunes failed to start because MSVCR80.dll could not be found - reinstalling this application could fix this prolem. What can I do to fix - do not want to lose all my music

Hello MMsole,
The following article provides steps that can help get iTunes back up and running.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Allen

My computer will not start up. the message diplaying says 'startup test failed'. any tips??

my computer will not start up. the message diplaying says 'startup test failed'. any tips??

Hi,
Do you know which test your notebook failed? If you don't know, try the following.
Shutdown the notebook. Tap away at f10 as you start the notebook to enter the bios menu. Under the Advanced or Diagnostic tab you should find the facility to run tests on both the Hard Drive and Memory. Post back with the details of any error messages.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hi I've just download os x mavericks 10.9 on my macbook pro the trouble is when i am on the internet my screen goes of it keeps saying put in your password how can i stop this every time the screen goes to sleep

hi I've just download os x mavericks 10.9 on my macbook pro the trouble is when i am on the internet my screen goes of it keeps saying put in your password how can i stop this everytime the screen goes to sleep

I don't know how you received an upgrade for iTunes. You make it sound like it was sent to you. At most your computer will tell you of a new version and you tell it to download it and install it. However, a computer will not do this for a version which is incompatible. iTunes 10.7 came out a few weeks ago but your computer would not notify you and even if it did, 10.7 would refuse to install on your computer. So this part isn't making a lot of sense.
Two ways to get the 'newer version' message. One is to open your library on a computer running a newer version, and then try to open it with an older version. Usually happens when the library is on an external and used with multiple computers. The second way is if you have multiple versions of itunes installed on your computer.
The newest (and likely the last) iTunes for OSX 10.5.8 is iTunes 10.6.3 which has been out for quite a while.
iTunes 10.6.3.25 - http://support.apple.com/kb/DL1575

When trying to load bank account https it says dom menu failed to load

hi when trying to go into a bookmark for bank account, https i get a error that says dom menu failed to load?

Try to access that page via the main page (www.ncsecu.org) and don't use a link (bookmark) to a specific page.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

My Ipod would not sync to the itunes at all, Help? Itunes shows waiting for sync to start. then get a message saying that it failed to start. I restored the ipod but the problem still occured.

I have already updated all my itunes software and everything else.
recently, when I connect my ipod itouch to my itunes, it shows waiting for sync to start.
Then a message saying that it failed to start.
I have restored my itouch but it still fails to sync.
Any suggestions how to resolve it?

Se if this previous discussion helps:
Sync Session Failed to Start iTouch iOS5: Apple Support Communities

TS1424 trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says error 4010 cannot connect to ittunes store at this time try again later. what is the problem?

trying to add Itunes match, and am almost at the end of installation when an error message pops up. it says error 4010 cannot connect to ittunes store at this time try again later. what is the problem?

Contact Apple support for warranty service.

Frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus?

frozen rogue image on macbook air: synced iphone, was asked to download from itunes, to restart, did this. when restarted there was photo of chocolate saying 'love you'. never seen image, it will not delete, the techs at work tried too. No luck.Virus? any ideas?

I'm an applications developer and also run a part-time videography business. As such, I require more than 3.12GB of RAM. That is the physical limitation of a 32bit system. Pointless to stay on 32bit if you plan on having more than that much RAM.
I'm also not about to pay someone to fix my PC when I can do it myself. I was originally hoping for someone who had experienced the problem before to point me in the right direction so I didn't have to spend so much time trying to figure out what the issue was for myself.
Basically, in the end the problem was caused because right at the point in time when I chose to uninstall, and reinstall; Apple released a new version of iTunes. This version in turn had a requirement of iOS 4.2 to sync with the iPhone. This is a pretty embarrassing for Apple that they would release software reliant on other software before said software was released.
Had I realised I was downloading a newer version at the initial point of installation, this wouldn't have been an issue. I could've easily have rolled back iTunes to the previous version and gotten on with my life.
Another issue is that iTunes is not actually a 64 bit application. It masquerades as one to allow installation on the 64 bit platform.

When i start up my computer,it says reader_sl.exe failed to load,it will stop this program app.,ok

Similar Messages

Maybe you are looking for