When I starting my computer. I get more then one inbox at the bottom screen.

When starting up my computer. I get multiple in boxes. The icon has five in boxes. How do I fix this?
Thank you

Have you just started using Thunderbird, added a mail account and saw several Inbox?
or
have you been running thunderbird for a while and then these Inboxes just appeared?
Are there any emails in any of the Inbox 's?
Make sure you have View > Folders > All setting and post an image of your Folder Pane into this question, so that I can see what you are seeing.
Additional:
Is the mail account IMAP or POP?

Similar Messages

When I start my computer I get a "AppleSyncNotifier.exe Entry Point Not Found message. I also get an error message when trying to sync with iTunes that a backup session cannot be started. How do I fix this?

In the last few days when I start my computer, I get a box that opens with "AppleSyncNotifier.exe" Entry Point Not Found in the title.
It says: "The procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQlite3.dll.
I have tried uninstalling and reinstalling iTunes and still get an error message when trying to sync my phone with iTunes
"iTunes could not back up iPhone ####, because a session could not be started with the iPhone."
The last time I tried to sync my phone (iPhone 3G S) with iTunes, everything seemed to freeze up at Stage 4 of the sync process.
Any advice????

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Object would have more then one attribute with the tag :VALUE

I'm creating a new component in Ultiboard - a 100 pin connector. This connector (Hirose) has 4 rows of 25 pins. Alternate rows are staggered. I'm trying to name each pin with it's appropiate name: A1, A2, A3 ....A50. Then B1, B2, B3 .....B50.
When I change the VALUE or NUMBER attribute, I get the DRC error message:
This action cannot be completed because the resulting Object would have more then one attribute with the tag :VALUE
Please remove one of the attributes and try again.
Okay, so I've tried deleting the tag and now I can't name the pin at all.
What am I missing?

You should be in the footprint editor to edit the pin name. Select tools>>Database>>Database Manager, highlight the component in your database and click on the Edit icon. In the footprint editor, double click on the pad and a SMT or THT pin Properties dialog appears, select the Attributes tab and highlight the Number row, press the change button and you should be able to change the pin name.
Tien P.
National Instruments

SAP is allowing miro more then one time against the single GRN

Hi All
Sap is allowing Miro more then one time against the GRN. We have done miro twice and it is still open for miro. In normal case after doing miro SAP shows zero value and qty in grn field in miro screen.
i want to ristrict his .
can any body tell me the process
Regards
Prakash

Hi,
Option-1:Use T.Code:OMRM & maintain the message M8 -081 as error,Quantities invoiced greater than goods receipt quantity as error [maintain GR-based IV in the PO item level ]
Option-2:Use T.code: OMRM & Maintain the message M8 -087 - Invoice quantity greater than PO quantity [item without GR] as error.
Regards,
Biju K
Edited by: Bijay Kumar Barik on Jan 29, 2009 1:59 PM

TS2972 Getting more then one itunes library on apple tv

Can I have more then one library linked to the apple tv at a time? If so how can I add the library? The computer home sharing is on! And so its the apple tv home sharing..

Yes, but they both have to be under the same home sharing ID

Configure more then one device at the JMF??

Hello every body..
I have a problem with dealing with java media frame work and i want to solve the problem as fast as i can since it will delay my work..
I hobe that any one can hep me..
The problem:
If any one use JMF Studio it is known that any one can captre any device connected such as ( camera , mic,...) using JMFStudio..
I do the capturing very well but the problem i face it is HOW I CAN CONFIGURE MORE THAN ONE CAMERA AT THE JMF??
If i connect 2-cameras from different types ( sony , web cam) then the jmf registary will register the 2-cameras with only one difinition is( vfw:Microsoft WDM Image Capture (Win32):0 ) so when i use the java code to access the 2-cameras then i found only one difinition for one camera and i can access only one camera!!!!!!!!!
I don't know how i can solve this problem??
please help me !!
For reply or any information contact me at my e-mail
[email protected]

Thanks for reply sir omcgovern..
I read what you say but i wondered while this problem from 2003 there is no any solution to this problem??
Now , what i can do to trick this problem???
Please if there are any solutions help me as fast as can !!!!!

Can you have more then one iphone control the apple tv at the same time?

Can you have more then one iphone4 as a remote for one apple tv at the same time?

iCloud, iTunes & Apps Stores can be assigned different AppleID's from the Settings app. I have my phone and my wife's set up this way for the very reasons you are describing. Works well.

When I start my computer, I get popup error msg that "Apple Sync Notifier" has stopped working. I have tried several remedies suggested by those on the Apple (and Roxio) tech support. Nothing has worked. Trying to burn disc or puchased ITUNES.

I have been trying to burn newly purchased (as well as last year purchases) ITunes to a disc. I had burned some of these songs to a disc last year and all went well. Now I have been getting this popup telling me that the AppleSync Notifier has stoped working & the corefoundation.dll needs to be re-installed. Also that Windows will try to fix the problem. Every time I try to burn the disc, the computer sends the disc back out and the screen tells me to put in a blank recordable disc. I have tried 4 different new discs now and the same thing happens.
I am running Windows Vista.
Have been to the Roxio web site for help as well as Apple.
Have tried many "fixes" such as: updating latest version of Direct X from the Microsoft website; Disabling startup items; going to local disc C and into the Apple/Apple Appplication support and right-clicking on the SQLite3.dll and moving it tomobile support device window. Nothing has worked. What can I do to get some music recorder? Should I buy a new cassette deck and record onto tape like I did 20 years ago? This is a very important disc I am making as a gift & I need to get it done by this weekend. Is there anyone that can offer good advice?

love paying a lot of money for something that doesn't work right, thanks apple

We just received our new mac and took it to the store to have the old files from our last computer transferred over. Now we can't find all our files. There was more then one user on the old machine. How can we find the files from the other users?

We need to find where the files for the other user on the computer are now located. There were two other users on the old machine, which was taken into the store and ALL files were suppose to be transferred over to this computer. HELP!

It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files.

Can i get more then one PR in one line item of PO?

Dear SAPIENTS,
My requirement is that as I drag 5-10 PR together in header of PO, can i drag same way 5-10 PR in item details. My PR is containing services. I have to press service selection button anad again to get services from PR.
Regards,
Kaushal Rai

Hi,
1. In me21n screen switch on the document overview
2. Drag your PR into shopping crat at the header (next to PO document type)
3. Then in item details tab, goto delivery schedule at the bottom you can find one more shopping crat, there drag & drop the remianing pr's.
Now it will create in single line item.
Note: Delivery date will be the latest one.
Regards,
Prabu

Priting more then one page in the layout

I can't print anymore more then 1 pages per layout of each printed page!
This happened from leopard. I have upgraded the system, then i did a archive & install trying to solve the problem, but there were no changes.
I can't print even from new just created users

Not sure this will help -- But at first I was not able to print more than one page on my EPSON STYLUS PHOTO R200 printer. When the page opened -- I had the Printer listed in the top Title space. After several attempts, i noticed there was a black arrow next to the Printer name -- I clicked on it to open and all of the application features including setting # of copies appeared. I seem to remember reading something that in Leopard 10.5 Printing is now tied to the application rather than the printer. Maybe this had something to do with it not appearing at first.
Only problem I have now is LEOPARD does not recognize my printer Utility software --for cleaning heads, determining ink levels, etc. I've e-mailed EPSON on this
Pete Collins

When I start de application, I get two messages at once. The first one tells me that there are two upgraded elements and the second one tells me that a customer of mine has made some online changes on the website. Then I can do nothing more.

Beste forum,
Ik heb een groot probleem met Muse.
Als ik het programma opstart en een bestaande website open, krijg ik twee meldingen te zien: de eerste zegt dat er twee geupsamplede bestanden zijn. De tweede dat er online een wijziging heeft plaatsgevonden. Beide vensters zijn vervolgens niet aan te klikken en het programma doet niets meer.@

The message tells that published version of the site includes some changes which you can synch to your Muse file, is that after sync Muse hangs ? is it with a specific file or any file ?
If you try to undo the changes , are you able to open the site and work ?
Thanks,
Sanjit

More then one player playing the same stream

Hi,
the problem is when i try to send media stream to a multicast server with class D ip address (224.224.224.24) on port 49150
it should multicast the stream to the set of receivers on their ip's and ports.
please suggest me whether multicasting this stream is the job of server (we need to do some networking stuff) or we need to do this by our java code by writing a code that runs on multicast server and transmits the stream to a set of users.
Note
in practical
in my company network i changed my server IP to 224.224.224.24 and tried to run the codes.

You might try:
224.112.112.112 22222
I had a lot of problems getting multicasting working back in the day, but it was because I was using an invalid address.
:-/

Opening the same form more then one time in the same session

H! I want to accomplish the following .... I have a form that has a button. The code in the when-buttin-pressed trigger is a call_form - to open another form. I want to be able to push this button as many times as the user may want and the form should keep opening a new form. Meaning I can have 10 forms of the second form open if I want. The user basically wants to be able to flip between the data on the same form opening up this form a couple of times in different windows. when I use the call form the button on the initial form is becoming disabled - not allowing me to push it again to open another form without closing the one already open. Please HELP!

Sounds like you need Run_product rather than Call_form.
It will establish multiple database sessions, and the user will be responsible for terminating them. And I am not sure, but this may only be possible in client/server forms.

Why can't I send text messages to more then one recipients from the UK?

I have an iPhone 6 with the latest operating system. I travel to the UK frequently. When I attempt to send a text message to multiple recipients it comes back as undeliverable. However I am able to send textx to single recipients. This only happens in the UK That I know of.

It's ask the person who has that phone - that's where the problem is.

When I starting my computer. I get more then one inbox at the bottom screen.

Similar Messages

Maybe you are looking for