When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens.
Same thing here. I'm getting very frustrated. When I swipe phone to open, and hit the phone icon, then make a call, most times it says "calling mobile" but then nothing happens. Then I try to end the call and hit the END button. Sure, it looks like the call disconnected, but as soon as I try to make another call, I see the same screen (the first called) and the words "calling mobile". The only way I can rememdy this, naturally, is powering off and restarting. But, c'mon...$300 for a phone that you have to power down between calls???
I've got the latest OS update, no jailbreak, or anything exotic on my 4s. What's more, when I try to make a call 2 out of 3 times, the dumb SIRI opens up and stops me from making the call. (and, yes, I have very carefully checked my process that I am not intentionally activating SIRI with my cheek.)
Again, $300 for all this in just trying to make a call?
reset your phonr by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
Similar Messages
-
i update my 3gs to 6.1 from 4.1 after installation of software it shows connect to itunes or connect to wi-fi when i connect it to itunes it shows the iphone tab in itunes bt after some times it say we are unable to complete your request please help me
That would be the wireless number assigned by AT&T when the purchaser of the iPhone signed up as a customer with AT&T. If neither you nor your uncle ever activated the iPhone with AT&T, click the "non customer" button.
Note that jailbreaking often renders it impossible to get an iPhone officially unlocked, so don't be surprised if it fails. If it does, then you may have to buy a new iPhone, this time one that is officially unlocked.
Regards. -
After downloadingOSX I have not been able to open iphoto. It has the spinning icon for the last 2 1/2 hours and will not let me open nor quit the applications. Is this because of the amount of photos i have in the program? I'm sorry i downloaded the update. I have work to do with the photos
I was able to turn it on but when I turned on WiFI the apps would not open and the phone crashed again and turned off.
-
I am having a problem with the new iTunes store. I can connect my ipod, and it will show that it is syncing. Once the sync is complete on iTunes, my ipod still shows that it is connected, do not eject. I have not had a problem with this until the new verision of iTunes. When I go to eject my ipod, it tells me that it can't eject due to application being used in another program. I did receive an ipad 2 for Christmas, that I also sync with iTunes, but only the ipad shows up in my devices on the site, what happened to my ipod device and how to add it back to devices? Help is greatly appreciated. Thanks.
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Anyone else having issues with their wi-fi suddenly disappearing?
Is this really a hardware issue out of the blue or could this be a software bug?Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP -
hello, i have youtube videos on my iweb site. but i would like to know if it is possible to get a 'pop-up' affect when you click on a small photo of the video, to open and play the video in a popup?
we have tried using video light box, but this doesnt seem to work.There's an example of one at the buttom of ths page...
http://www.iwebformusicians.com/Website-Movie-Video/YouTube.html
Rather than link to the file, the movie is on a separate web page and uses the code shown on this page...
http://www.iwebformusicians.com/Website-Photos/Image-New-Window.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
I am trying to transfer files from my old pc to my new mac. When I go to migration assistant, and hit the continue button on the introductory screen, I get a message that says M Asst wants to make changes - type your password to allow this. What is my password or how do I set one up for this?
When you set up your Mac you had to enter a admin password to set up your user account.
If you did not enter one then try using the "blank window" as your password. ie Just hit return with nothing entered.
If that does not work try this reference:
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/?part=rss&tag=feed&subj=MacFixIt -
I have a 2012 Subaru Forester and when I get in, my iPhone5 won't connect to my Bluetooth radio. I have my Bluetooth radio knows about the phone, but the iPhone5 just won't connect. I have to go and delete the iPhone5 from the radio memory and then pair the radio & the iPhone5 again, then it connects and works great until I shut off the car. Then when I get back in or restart the car I have to go through this all over again. Anybody got any ideas? It is driving me crazy and i just got my iPhone5 a week ago. Now I am not a real iPhone Savvy user, so it may just be something I have not set properly. So can some one Help? Please!
My Subaru Forester 2012 wouldn't reconnect automatically to my new phone.
It did my head in for months.
Thanks guys, because of you, I worked this out. My Forester needed the "handsfree" setup, not just a Bluetooth pairing. Reading your posts, suggesting to setup the phone through the steering wheel buttons worked.
But only to initiate the hansfree component.
From turning car accessories on - Pressing "off hook" button on the wheel, initiates the "handsfree" setup. Because I'd done this originally, my old phone was in here. Deleted it using the tune dial (no voice commands) and deleted pairing on iPhone 4.
Turned car off, and back on again, pressed "off hook" and using tune dial, recorded new phone profile name, and paired the phone. Now it auto connects everytime I get in the car
Woohoo.
Johnny -
i have issue with my iphone5, the phone is open and good network signal, but when some one calling me they cant reach me, like the phone is off
You are as far as you can be with the original iPad; only iPad 2 and greater will update to 7+
-
all of a sudden my itunes wont come up when i hit the desktop icon. un and re installed many times, tried new users, it finally gave me "you need to reinstall sqmapi.dll " im a noob and i have know idea what that is or where i can get it. i cant open any file or library that has anything to do with itunes except safari and quicktime are fine. im about to pull out whats left of my hair.
Okay, that's got one thing ruled out at least.
Can you check something for me, big? I'd like to see if iTunes launches with the Bonjour Service disabled.
In your Start menu, right-click Computer and select "Manage".
Expand "Services & Applications".
Open "Services". (Perhaps maximise the screen to better see what's going on.)
Right-click the Bonjour Service and select "Properties".
In the General tab, set the Startup type to "Disabled":
... and click OK.
Restart the PC and try launching iTunes. Does it open this time? -
my ipod touch 2g is on black screen.when i connect it to my pc it is not recognizing it.then i opened i tunes and put the phone in dfu mode it says an ipod is detected but it cannot be restored error 1600.plz help me...
Error 1604
This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
Restore and wait for the error.
When prompted, click OK.
Close and reopen iTunes while the device remains connected.
The device should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Error 1600, 1601, 1602
Follow the steps listed above for Error 1604. This error may also be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software. -
My iphone 4s crashes too much when i download and app from store and open it its freeze or crash and restart the phone i think i am having big problem with this device i restored it to factory settings and no waay!
I think many of us need a Defense Against the Podcasts App professor.
Have you looked at this Apple support page?
http://support.apple.com/kb/HT6190?viewlocale=en_US&locale=en_US -
when I go to "settings" on my iPhone 5 and hit the "Bluetooth" tab, the circular icon next to "Devices" is constantly spinning, ans now I can't get the phone to sync with the bluetooth in my car, etc.
Any ideas on how I can correct this?unpair your phone from your car, then do a re-pair.
-
to continue: For information on how to remove this folder from the Outlook Address book, see MSOffice Outlook help. I also get an error message when I go to tools and hit the address book there. This crap is frustrating!
Hi,
Based on your description, I suspect that your proxy is in internet zone by default, so it cannot use credential
which has been recorded in window credential management. I suggest that we add
proxy server into “Local Intranet” zone via GPO to see if it can solve your problem.
Let me know if it works for you. Thank you. -
Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels. Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer. I have a pretty simple system with only a few plug-ins, which are usually not in operation. I have 12GB of RAM in my Windows 7 PC. I could illustrate these problems with screen shots if you would tell me how to submit screen shots. Otherwise I will try to describe the problems in words.
The problem is clearly cumulative, growing worse as usage time passes. Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond. In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
To experiment I created a new catalog of 1100 images. After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data. (I have a screen shot to show this.) CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong. I could also send screen shots of this data.
At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR. This is not normal. I hope you can find the cause, and then the solution. If you would like to see my screen shots, tell me how to submit them.
Ollie
[email protected]
Maybe you are looking for
-
Hi,Im looking into geting the ipod touch,but I have read that the ipod touch does not work well with windows vista. I know the new itunes 7.5 just came out. Has that version fixed the problems with the ipod? Also what are the problems the ipod touch
-
Return Delivery for In-House Repair Order
When I create an In-House Repair order in CRM and replicate it to ECC, the return delivery does contain the special stock indicator "E", hence the stock is posted to unrestricted. This only happens with replicated orders. Any ideas?
-
Hello Experts , I want to use the subroutines. Please tell me how can i do this. Kuldeep
-
How to bold/italics/underline specific text (not default) in Calendar Ver 7?
See above. I've already tried Ctrl+ U/I/B and Command + U/I/B The app = Calendar Version 7.0 (1835.1) in Mac OS X. Looking to select specific text in the Notes/Attachments/URL portion of the appointment and mark it up. We can do this right? MS Of
-
Web Crystal Report not working after period of time
Hi I have had a problem for a long time now on one of our web servers, it's becoming more of an issue lately due to a web site using Crystal more. The problem is that the Crystal Report Viewer does not load after a few hours. If I re ship the main DL