When I switched over to the new 7.2 I inserted the password into my wife,s apple account here she started to get all my contacts, the problem was resolved but I lost the entire list of contact on my phoe, what to do now?

How do I reload all my contact, I lost it when I upgraded to 7.2, to no fault of apple, the bag is all mine.

Apps are forever tied to the Apple ID under which they were purchased. If your friend wants to be able to manage apps on their device using their own Apple ID, they will need to delete all the apps purchased using your Apple ID and buy their own.
Hopefully, you just updated your own Apple ID with the new email and didn't make the mistake of creating a new Apple ID. If you created a new ID, stop using it now, don't buy anything using it and go back and update the ID under which you purchased your apps.

Similar Messages

HT2216 I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. Any clues?

I am on OSX 10.7.5 and recently had to reinstall it due to 'mail' not working correctly. That problem was resolved but now my I can't use the 'right click' function on the apple usb mouse. I only have a previous version re-install disc as I bought the latest OSX off the app store. Any help gratefully received?

Hmmm, no, no drivers needed, now it sounds like a bad install... unless you might have some old Mouse software installed???
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
If that doesn't help Reinstall the OS.

Everytime I tried to click something on my computer screen, this thing would jump over to the reading list. Then, after awhile, my computer was running really slow. So, I decided to shut down my computer. Then, I turned it back on, and when I tried to sig

Everytime I tried to click something on my computer screen, this thing would jump over to the reading list. Then, after awhile, my computer was running really slow. So, I decided to shut down my computer. Then, I turned it back on. When I tried to log on, everything was on caps. But, my keyboard was not on caps lock. I thought that it might work, but then I had to put a dot. And instead it gave me a >, as if I was holding down the shift key, and I wasn't. So, I can't get on my computer, and I need it for school tomorrow. Thanks so much.

1. Startup in Safe Mode   http://support.apple.com/kb/PH14204
2. Reset PRAM. http://support.apple.com/kb/PH4405
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

Is it possible to display the entire list in Background ?

Hi all,
I have alv report(Oops) , it is grid display and having more than 300 columns , when i execute that report in background i am getting only 132 columns and 65 lines per page, Is it possible to display the entire list , If it is possible then how we can do that? if it is not what is the reason? .
Thanks in Advance.

Hi,
If use Grid in BG u will get o/p In ALV List Itself, second thing is u will get Croped o/p bcos of Print Format 65255 , in this case u have to create/change a new Print Format only for BG jobs like 651000.
for more info ask ur basis person to create a new print formats in such cases.
Regards,
shiva.

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

In my wife's window, the sound works, when I switch over to my window the sound doesn't work. I noticed the problem when I went to a YouTube video. How do I correct this?

Hello Kiira Doon,
The troubleshooting steps detailed below may help get your iPhone's display to function.
Toggle the ringer switch to see if the unit vibrates. If it does, it could be that iPhone is getting power, but is not displaying any image.
Try turning iPhone off and then on again.
While connected to the iPhone charger, try to reset the iPhone.
If the low-battery screen appears, charge the iPhone.
My issue is still not resolved. What do I do next?Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add to a rule, such as "delete incoming" I have to go through the entire list to find it.

Is it possible to sort Mac Mail Rules into alphabetical order? I have in excess of 50 rules and everytime I want to add or amend a rule, such as "delete incoming" I have to go through the entire list to find it. I have tried clicking on the heading "Description" but it does not sort. Any assistance would be greatly appreciated

Hi,
According to your description, my understanding is that use CMAK to configure split tunneling on VPN clients, traffic to specified devices can be routed via their own default gateway.
If the manually added route entries all have default metric and interface, clients will select one by the default routing rule, can’t select one of them according to clients’ own conditions. So, I am afraid that CMAK can’t implement the function which you need.
A blog described about How to configure split tunneling on VPN clients using CMAK, for your reference:
http://blogs.technet.com/b/rrasblog/archive/2007/06/11/split-tunnelling-using-cmak.aspx
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to stop preview window from automatically getting focus when you move up/down the message list.

Since updating (my TB was a few versions old) to 31.2, the preview window automatically gets focus when I move up/down the message list. I'm assuming this is a new "feature". Is there a way to shut this off and leave the focus on the message list so I can navigate up/down like before?

You are referring to the 'Message Pane' which displays selected opened emails below the list of emails. It is not a 'preview'.
When you select an email by either using mouse to click on an email in the list or using the arrow keys to select emails up and down the list, you are selecting an email to open and read. That is why it is being opened in the Message Pane so that you can read it.
If you select an email in the list and then cllck anywhere else including in the Message Pane, then you will have moved focus away from the list and the strong highlight on email in list is reduced to paler highlight.
When you click on an email in the list, the email becomes highlighted, at this point you can use eg: arrow keys to move up and down the list.
If you are performing single left click on email in list and then do nothing else and the strong highlight auto changes to paler highlight.
Check you do not have a conflict with an addon by starting Thunderbird in Safe Mode.
Help > select 'Restart with addons disabled'

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

I have just owned a macbook pro and trying to learn things since i have all along used windows laptop. My first question is : when there are two files i am working together, one above the other on screen, how you switch over between the two with key ?

Hi...
Mac OS X keyboard shortcuts
Control-F4
Move focus to the active (or next) window
Shift-Control-F4
Move focus to the previously active window
By the way... since you are new to Mac, click a clear space on your Desktop. You should see "Finder" top left corner of the screen in the menu bar.
Click Help then click Help Center
As an example type in keyboard shortcuts
You can use the Help menu for almost any application on your Mac.
Apple - Find Out How - Mac Basics
For held switching from PC to Mac > Apple - Support - Switch 101

I just got the new 5s and when i downloaded my contacts from iCloud a lot of them are missing!!!! i tired to make a new backup from my old iphone but it didn´t worked, what can i do to get all my contacts

i just got the new 5s and when i downloaded my contacts from iCloud a lot of them were missing!!!! i tired to make a new backup from my old iphone but it didn´t worked, what can i do to get all my contacts?

See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock

TS3992 I'm trying to switch over to my new iPhone and every time I get to the point of inputting my icloud details, a message appears stating no backup available. I have followed all the instructions detailed above but no success. I've been trying to for

Loosing patience :
I've tried for 2months to switch over to my new 4s, but every time I enter my apple ID to retrieve backup from icloud. I'm informed no back up available.
Given tried for 2months, I'm tempted to bin it and get an alternative phone.

As you backup the iPhone in iTunes, it overwrites the last backup. Files are kept as they are changed, so that would explain how you get different dates in your backup folder. The only backups that are saved and not overwritten are the ones done just prior to a restore. You do have the option to go back in time on a Windows computer, however depending on the last time you set a restore point in Windows, it could be back further than you are willing to go.

How to change to a new phone. I currently have an iphone 5. Just got a new iphone 6 as a gift. I want to switch over to my new phone on my own instead of going back to the store

How to change to a new phone. I currently have an iphone 5. Just got a new iphone 6 as a gift. I want to switch over to my new phone on my own instead of going back to the store

Back up the old phone and restore the new one from that backup, follow these articles:
Transfer content from an iPhone, iPad, or iPod touch to a new device - Apple Support
How to back up your devices using iCloud or iTunes - Apple Support

[svn:fx-trunk] 12542: When adding a mask to the display list need to validate it and all its children .

Revision: 12542
Revision: 12542
Author:   [email protected]
Date:     2009-12-04 10:38:32 -0800 (Fri, 04 Dec 2009)
Log Message:
When adding a mask to the display list need to validate it and all its children. Previously the children were not validated and their display list was updated before properties were committed or measure was done. RichText was not set up to handle this.
QE notes:
Doc notes:
Bugs: SDK-24511
Reviewer: Evtim, Deepa
Tests run: checkintests, fxg, primitives, Group
Is noteworthy for integration: no
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-24511
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/supportClasses/GroupBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/utils/MaskUtil.as

AFAIK, the only way to do this is to write a system modifcation.
The BADI is executed only once at startup of the session, so that makes it merely static. (A strange point in time, I discussed it with SAP and they just shook their heads)
I had the same problem with some other F4-Helps and it was a big hazzle. From my experience, no straight answer.

HT202297 I can't drag my ical events over to the reminders list.

I can't drag my ical events over to the reminders list (that's not there anymore) like I used to be able to do. Why?

What version of iphoto? If it's iPhoto 11:
Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder Window should open with the file selected. Does it?
Iphoto 09 or earlier
Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window +should+ open with the file selected. Does it?
Regards
TD

When streaming audio over Bluetooth the wifi is unusable.

When streaming audio over Bluetooth the wifi connection gets slow and unusable. So no Internet radios over Blutetooth, no streaming from Box.net etc. any solution?

Try and change the Wi-Fi channel.

On my own website vdha.us, I am now getting many words that are purple and when you mouse over them, a new spamming window opens trying to sell something. IE-9 does not do this. How do I turn this off in firefox?

Sirs,
The below URL came up immediately when I tried to access our Newfangled website this morning http://vdha.us :
http://surveyprizecenter.com/survey/claimgift-GT-kw-7b.php?t202kw=Vdha.us&trimmedKeyword=Vdha.us
I prefer to use Firefox and very seldom use IE-9. but now I might be forced to remove Firefox 4.0.1 and resort to using IE-9 because of this situation.
I don’t know how spammers can use our website to exploit their spamming, but I can only imagine the complaints I am going to get from our Board of Directors and members about this.
Can you make them stop, or at least explain how it is that anyone can do this without our permission.
We have never allowed advertisement on our website and don’t plan on starting now.
I am now also getting many words that are purple with two lines under them, and when you mouse over them, a new spamming window opens automatically trying to sell something. How do I turn this off?
I would appreciate any expediency in the return of an answer that you can provide.
Kindest Regards,
Dave Broeker
VDHA Life Member #1797
VDHA Webmaster & BX Manager
http://vdha.us

The "MySearchDial" app needs to be removed in 4 places.
1) Go to "add / remove programs" in your windows control panel select mysearchdial and remove it.
2) Open your Firefox browser then click the Firefox tab at the top left and select options. You will need to change the start page settings back to your preferred start page.
3) Again under the Firefox tab select "add-ons". In the add-ons manager you will need to remove mysearchdial from both "plugins" and "extensions"
4) In your search bar (top right of address bar" use the drop down menu and select "manage search engines". You can restore your preferred search engine and remove mysearchdial from the menu.
This should remove all the components of the nuisance hijacker and restore your browser back to your preferred settings. If you are comfortable with a more in depth removal I would also suggest going to your "programs" folder within the "C" drive of your machine and deleting the "MySearchDial" folder altogether. However, only do this AFTER you have uninstalled it from your system and if you are familiar with this type of removal.

When I switched over to the new 7.2 I inserted the password into my wife,s apple account here she started to get all my contacts, the problem was resolved but I lost the entire list of contact on my phoe, what to do now?

Similar Messages

Maybe you are looking for