When I sync my IPod it remembers the plays and doesn't count them from 1 even though I reset the play count, any fix?
The problem is I like to track my play counts and like it to be correct, and it was having some errors so I reset my plays on all my songs however when I sync my iPod it will remember the amount of plays for example, if I play a song once on my iPod and then sync it it will have 1 play, then if I reset the play count back to 0 and play it on my iPod again when I sync it again it will give it a play count of 2 and so forth as many times as it gets played.
I have an iPod touch 5, the most recent iTunes update and the most recent iPod software (iOS 8.1) and am using windows 7, but I think the problem comes from the iPod because if i reset the plays and play a song through iTunes it will go to 1, but if i listened to it 3 times on my iPod when i sync it, it will then go to 4.
I have tried restoring the iPod and syncing it so there is no music on it and then putting it all back on but the problem persists. The only other thing i can think to do is uninstall/re-install iTunes but I'm worried if I do that it will delete my music. That is not a big deal as I have back up files elsewhere on my computer but I also have album art, lyrics etc. for all my 1077 songs and id rather avoid having to get it all back.
Anyone know how to correct this or is perhaps having a similar problem?
Thanks, Sean.
If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
Follow the instructions here: iPhone and iPod touch: Unable to update or restore
Similar Messages
-
I have seven(7) podcasts on my iPhone 4 that iTunes will not delete. iTunes copies them from the phone to the library and will not delete them from the phone when deleted from the library. I have replayed the podcasts over and over and they still won't delete. Podcasts are WSJ Tech briefings.
This happens to several of my podcasts whenever an updated iOS comes out. You can delete the episode directly from the phone by swiping it from left to right. That seems to fix the issue (they drop off the phone and dont reappear on iTunes). It's as if iTunes stops tracking the play count for some shows.
Hope this helps! -
When I open firefox it is returning to the last viewed page instead of my homepage even though I have the settings set to clear history every time I close Firefox. I check and all of the previous history is still there and not deleted..
Make sure that Firefox closes properly and that that there are no longer Firefox or plugin-container processes left on the Processes tab in the Task Manager. Otherwise session restore will reopen the page(s) from the previous session.
See "Hang at exit":
* http://kb.mozillazine.org/Firefox_hangs
* https://support.mozilla.com/kb/Firefox+hangs -
I purchased and downloaded some songs, everything went fine, but when I tried to play the song it only ran for 3 seconds even though it said the song was over 4 minutes????
Try download and install the latest iTunes 10.6.3 just reoleased yesterday and try out.
-
Hi, i've imported some mts files from my camera on fcpx 10,04 then i erase them (also from the trash). now if i try to reimport them, the import from camera doesn't see them anymore even if i see the files in the finder. someone could help me??
ps
i got a backup for the files but even if they are on the mmc, when camera is connected fcpx doesn't see them. if i try to import a new shoot it works!!Thx a lot Salty. As you suggest I found other staff on support pages. I deleted AVCHD structure and kept only .mts... Now what I need to do is to convert those files with handbrake or similar tool in .mp4 or .mov to make them digest to FCPX.
-
In Illustrator, I have a saved artwork, then I'm saving a copy as PDF, as usual.
After I keep the AI file open, making some modifications which I don't want to save, so I close the file and click "Don't Save".
Even though I clicked that, the file's modification time is changing.
(The modifications I made are not there, so it's not really saving but why the date is changing then?)
Please find the cause of it! Thank you!All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.
-
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
-
Question
Emails sent to me are sometime returned to the sender with the message "Inbox full" even though I have maybe less than 100 emails in the Inbox and I regularly compact them. I delete emails from the Inbox and the Sent and Trash boxes to overcome this. How can I increase the storage space to stop this happening?Hi terrybohle1938,
Firefox is a web browser. It provides access to online content. Things like your email are handled by the content provider. Who is your email provider? You'll have better luck consulting their documentation.
That being said, deleting only email is a great way to free up space. Another option would be to purchase a "Premium" account if your email provider offers this service. Many times more storage space is offered as part of paid subscription.
Hopefully this helps! -
Bought my laptop off my room mate and he had master reset it to default. This still left his name as the computer name and I wanted to change that. Tried to rename it under the advanced changes section, and now it isn't recognizing my password for anything more than logging in. I can't unlock the settings to make further changes (or change it back). I have had my room mate try all of his old passwords and usernames, to no avail. Is there a way to reset this? It's also not letting me wipe the drive and start fresh again because, alas, I don't have access without the password. Any advice would be very helpful. Thank you!
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
I upgraded my iphone last night on the phone, today I cannot get the computer and the phone to work together. When I click restore iPhone, and my only choice is to restore and upgrade, when it starts the upgrade, it says the phone has not been restored. I did just upgrade the itunes on the computer also.
This may not solve your problem but may clear up a couple of things.
1: Re the connected to wi-fi, plugged in and locked thing is for automatic backups. It doesn't need to be plugged in or locked for it to work when you go to Settings > iCloud > Backup and tap Back Up Now. Mine completes the backup quickly without being plugged in or locking (but I don't have a lot to backup).
2: Locked just means the lock screen is on (press the sleep/wake button on top) -- it will work without a passcode (& again, the lock screen on is only required for the automatic backup).
3: You can see what is using your storage and maybe reduce some of it so that you don't have to pay for storage. Instructions in Manage your iCloud storage - Apple Support -
I have downloaded a trial version of Adobe Photoshop and installed it. But when I run the App, this always shows up.
Although I have an internet connection, the problem is still there when I retry or re-open the app.Often malware changer your system tcpip host file to redirect ip addrress. Your "Host" file has no extension and normally is not redirecting much may look like MS default one which is all comments
# Copyright (c) 1993-2009 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
# localhost name resolution is handled within DNS itself.
# 127.0.0.1 localhost
# ::1 localhost -
When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks
Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.
-
My husband has a ton of songs in iTunes that I don't want on my iPod nano. Is there a way to set up a separate account on the same computer in iTunes? Do I have to un-tick all of his songs (would take forever!! And then he would have to tick them again)....when we sync our iPods?
No. Its not possible.
Alternatively, create another user account in your computer. Install iTunes in that account with the library you wish to sync. -
When I sync my iPod Classic, the changes I made (Ratings, Last Listened) do not show up on my computer.
Try another Sync. On occasions, I've know a first Sync to behave like this.
-
So, I looked at my iTunes library and realized that i had a rather small amount of music on it, while i have a rather large amount of music on my iPod. I don't know where all my music went on my computer, and I have no clue how it isn't there. When I sync my iPod it doesn't transfer my music back or even give me the, "We found some music on your iPod that is no longer in your library, would you like to transfer these songs?"
I don't really know what to do, andy advice?Never mind, the problem just fixed itself when i searched for an artist that wasn't there. That was odd.
Maybe you are looking for
-
Possible to ssh tunnel Bonjour traffic across different subnets?
Hello: For quite some time, I have been thinking of buying a couple of iSights to enable audio/visual between two distant computers. But I really don't want to have to leave a dozen ports in my DSL modems opened up in order to use AIM or Jabber serve
-
Running 10.6.1.7 itunes. I updated my Ipad 2 to 5.1.1 and tried to sync and received this message. I had programs that needed updating and hit the update all (6 of them) and they would not update. I deleted them and went to itunes to see if that was
-
I use Adobe CS 6 to edit and I use Sony NX 3 to record. Every time I import my clips. It has a yellow line on the timeline sequence, even when I make new clip from the sequence.. My question is, does this affect my video quality output if i did not r
-
Corba - differences between WLS 7.02 / WLS 8.1
In WLS 7.02 the following piece of code works, but in WLS 8.1 I get an exception on the last line (see the log below). Would someone have a clue why it's not working with WLS 8.1 Note: if you want to send me an email, remove the NOSPAM TIA ! public O
-
Suddenly I'm unable to download my RAW images from my Canon Rebel T2i to my flash drives when just a few weeks ago I was able to. What happened? I can download JPEGS just fine. No error codes, software works like normal, i see the previews and when i