When I take a picture with the flash on auto, I get a blue circle and no picture. When I turn the flash off the picture comes out fine. What do I do to take a pic in low light

When I take a picture with my iphone 4 and the flash is on I get a blue flash and a big blue screen with no pic. When I turn the flash off the pics come out
fine. I turn the flash on to take a pic in low light I just get a blue screen. How do I remedy this?

Try a reset or restart of the device.
If that doesn't work attempt a restore of the phone's iOS

Similar Messages

Opening PDF from browser gets black page with white message box containing question mark in blue circle and an OK box that does nothing

Both reader XI and acrobat pro 9 installed on computer. Same error in both IE and Chrome. Using 'save as' the document can be saved to desk top and opened from there. There is a little flicker as if the document tried to open when black page first appears.

My idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??

my idvd wont play sound in some parts of my i movie project, even though i can hear the sound in imovie. dont get it??? and at the end of my i movie i added pictures with music. it appears as tough there is some kind of ripple effect when i play in idvd??? i dont know why, i did not add anty effect.

any suggestions

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

I am using a mini display to hdmi with my macbook and the display works fine. However, the sound will only play iTunes such as music and movies but when i go online to watch movies on youtube it will not play any sound. Please help

HDCP maybe? Read this http://www.macnn.com/articles/08/11/26/displayport.drm.conflict/

Setting up Abode Digital Editions, when I try to Authorize with my Abode id information I get the message "Activation Server Problem - check connection to the internet" when I clearly am connected to the internet ?

Hi can anyone help me please this is driving me crazy ! I download and install Abode Digital Editions and when I try to Authorize with my Abode ID information I get the message " Activation Server Problem - check connection to the internet when I clearly am connected to the internet ?

<moved from Downloading, Installing, Setting Up to Adobe Digital Editions>

I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!

I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error! I read the forms and done everything! Apple I name a loyal customer, please come out with an update soon!

That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

My catalog pictures render fine in the Library module but will not render in the Develop module. I get a blue box with a white X across it in the window where the picture should render. Any ideas on how to resolve this?

Developer Module only shows blue square with a white cross, images are displayed in the library ok but not im developer Module

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac.

Every time I turn my mac off, the desktop background changes. It always returns to the same picture, which was the second or third thing I changed my desktop to after getting my mac. I have background switching unchecked in my preferences, and I have never selected it as an option. Also, when I go to my preferences, it will show the icon of the picture I changed it to, even though the desktop itself has switched back.

I would start with some basic troubleshooting.
REPAIRING DISK PERMISSIONS -
NOTE: refer to article "About Disk Utility's Repair Disk Permissions feature" found here http://support.apple.com/kb/ht1452 - for the actual apple article on these step. ----
- click finder in the bottom dock, and in the window that opens, select applications in the left column - scroll through until you see the 'Utilities' folder and double click to open it. Then double click on 'Disk Utility'
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'Repair Disk Permissions'
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying 'Permissions repair complete'
Dan Frankes has written an excellent article for Macworld on "Permissions" and the need to repair them - see - http://www.macworld.com/article/52220/2006/08/repairpermissions.html. Another good web site is - http://www.thexlab.com/faqs/durepairfns.html.
REPAIRING DISK - About OS X Recovery - http://support.apple.com/kb/HT4718.
- restart your computer hold down command + R keys on the keyboard to boot you into Lion / Mountain Lion Recovery mode
- select english as your main language then the continue arrow
- select "Disk Utility" on the resulting screen then 'Disk Utility' ---
- When prompted to select a disk volume or image, select the 'Macintosh HD' in the left column
- ensure the the "first aid" tab is highlighted blue in the middle of the screen
- click the button at the bottom that says 'REPAIR DISK' .......NOT "Repair disk permissions"
- this process will take a few minutes to run. It will indicate it's done, by scrolling to the bottom of the "details area" displaying "The Macintosh HD appears OK"
If you get any other message OTHER than "The Macintosh HD appears OK", like "the Macintosh HD was repaired successfully" run the "Disk Repair" again, until it displays "The Macintosh HD appears OK".
Once done, restart the computer as normal

I have just updated my phone and now it won't turn back on. The display is currently black with the apple logo and a lot of sentences in white writing at the top all starting [NAND]????? what can i do to fix this?

I have just downloaded the new update and now my phone wont turn back on. The screen is blank with this across the top on the page:
[NAND]_findflashmediaandkeepout:601 physical nand blcok offset1......... (several more sentences similar to this saying error etc)
This happened before when the battery went dead and i plugged it in to charge, but started working again after a while. This time however its not doing anything.
HELP!

Might be hardware failure. Take the iPhone to the nearest Apple store
for evaluation. Make a Genius Bar appointment to avoid delay at the store.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

My computer crashed with lightroom open, since restart I get a msg LR encounted an error when reading from its preview cache and needs to quit

Hi All
My computer crashed with lightroom open, since restart I get a msg 'LR encounted an error when reading from its preview cache and needs to quit'
I'd appreciate any suggestions
Many thanks

Many thanks for your help, at lease the LR is working now. How do I rebuild previews and smart previews or will this happen automatically?
Many thanks

I have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb

i have several ipod nanos. i can sync one, but since i connected the ipad 2 I am getting an error on two of them, it says cannot sync, error 13019. the loaded songs show on the computer (on the ipods), but not when the ipod is plugged off the usb. Any answers? please

You can sync your iPod with multiple computers, but what can be synced is very limited. See this article for more details.
http://support.apple.com/kb/ht1202
B-rock

I am moving to Switzerland and want to take my iMac with me. Where do I get a different power cable?

I am moving to Switzerland and will take my iMac with me. Where do I get a power cable for Swiss electricity?

Best to wait until you get there and pickup the correct power cord from the local Apple Store or Apple retailer, otherwise you will have to use an adapter with your cord.
WA-11A Travel Plug Adapter for Switzerland (Type J SEV 1011) [WA-11A] : Adaptelec.com, International Electrical Specialists

When I go in to SYSTEM PREFERENCE and click on DESKTOP/SCREENSAVERS it says pictures loading but then I get that coloured circle and nothing else - I then have to force quit

When I go in to SYSTEM PREFERENCE and click on DESKTOP/SCREENSAVERS it says pictures loading but then I get that coloured circle and nothing else - I then have to force quit

Hi Mende 1
I have just tried what you suggested and it came up with - folder can't be found?

My time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

my time capsule cannot connect to my system and I get an error msg -6753. I also get a clicking noise when I start up. I've tried every thing from re setting, un plugging and re setting but nothing works. Anybody have the same problem ?

A "clicking noise" is often a sign that a hard drive is malfunctioning. Suggest that you power down the device and take it to an Apple store to have them take a look, or contact Customer Service at Apple for instructions.

When I take a picture with the flash on auto, I get a blue circle and no picture. When I turn the flash off the picture comes out fine. What do I do to take a pic in low light

Similar Messages

Maybe you are looking for