When I take an image in Photo Booth, the flash is delayed so my resulting image is dark. Why is this?
I have checked that the flash function is on, and I have increased the brightness to maximum, none of which seem to rectify the situation. The flash seems delayed by a few milliseconds with the snapshot, so the image is the same as an image without flash. It there a way to synchronise the snapshot and the flash to the same instant?
I have noticed this change since I updated to OSX Mavericks.
Raw files always go straight to Photoshop without showing the "Open a copy" dialog. However:
SInce Photoshop CS5 uses an older version of Camera Raw compared to LR5, that older version isn't capable of interpreting all the settings that LR5 passes to it (normally LR sends the original raw file, plus the list of adjustments, over the Photoshop - and Photoshop renders the image using its own Camera Raw engine).
You would normally get a dialog indicating there is a Camera Raw version mismatch, giving you the options to "Render using Lightroom," or "Open anyway." You want to Render Using Lightroom.
you may have turned this dialog off - there's a checkbox that says "Don't show again." You can restore the display of this dialog box by going into Lightroom's preferences in the General tab, and choosing "Reset all warning dialogs."
here's a handy document from Victoria Bampton that explains raw rendering and camera raw version mismatch:
http://www.lightroomqueen.com/downloads/bookexcerpts/lr3excerpts/lr3sample-29-openanyway.p df
Hope oped that Helps!
MIke
Similar Messages
-
whenever I take pictures with my 4s and the flash is on the picture comes out with a blue tint.. I have a case but I took it off to test that theory and it still turns up blue.. I also don't have a protective film or anything over the camera..
I also have this problem with my recent 4s. Camera flash is bouncing back on its back pannel of the phone, apple did change my phone with a new one
-
When a video is taken in Photo Booth, the sound does not match up
When trying to take a video on photobooth, the sound does not match up with the image when the video is played back. What can I do to fix this?
Check your footage interpretation, split the audio in an external program, convert the sample rate and import it separately or whatever. Most likely you simply have used unsuitable recording settings with odd sample and data rates.
Mylenium -
What can I do to prevent this from happening? I would like to have all my images downloaded from camera to computer and then make my choice as to which one to keep and which to deleted.
1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
Your first priority is to make more space on that HD. Nothing else can be done until you do.
Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
Your Library has been damaged from being run on an overfull disk.
How much free space on it now? -
When clicking on another window on photo booth...
When I make a video on photo booth or a recording or whatever and i am doing the video so like i am talking in the video. And say I want to get a song on youtube once I click out of the photo booth window (not meaning x out of photo booth just going to another window) the movie stops.
... once I click ... another window) the movie stops.
That is how Photo Booth works. It only records while it is the "active" window.
Do you have a question?
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight -
For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.
For anyone who has used "Smilebox" for greeting cards: I can take video made in Photo Booth and use in my Smilebox greetings and I can use photos from iPhoto to use there also. I have not been able to figure out how to take clips from iMovie for use with Smilebox.
-
i was going to take a picture on photo booth. I clicked the app and it said there was no camera connected. how do i fix it?
If restarting Mac does not fix it, one of the suggestions in http://support.apple.com/kb/
HT2090 will get it working. (Over time, Apple has changed the built-in camera's name on newer Macs from "iSight" to "FaceTime" and then to "FaceTime HD." Regardless of the name of your Mac's built-in camera, the same info and troubleshooting applies.)
Message was edited by: EZ Jim
Mac OSX 10.8.4 -
I have An iphone 5... And when I take a picture it appear on the photo app on the middle of the screen and not on the whole screen.. How can I fix it?
Definitlely have it looked at. That could be a hardware deffect on the maker(apple) so there could be a definite replacement option.
-
I recently purchased the 16GB 5s. I didn't notice this before, but when I attempt to take a photo with the flash in the "on" position, the flash only works sporadically when I take a picture with the phone vertical. Anyone else with this problem?
I recently purchased the 16GB 5s. I didn't notice this before, but when I attempt to take a photo with the flash in the "on" position, the flash only works sporadically when I take a picture with the phone vertical. Anyone else with this problem?
-
hello, i have youtube videos on my iweb site. but i would like to know if it is possible to get a 'pop-up' affect when you click on a small photo of the video, to open and play the video in a popup?
we have tried using video light box, but this doesnt seem to work.There's an example of one at the buttom of ths page...
http://www.iwebformusicians.com/Website-Movie-Video/YouTube.html
Rather than link to the file, the movie is on a separate web page and uses the code shown on this page...
http://www.iwebformusicians.com/Website-Photos/Image-New-Window.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
when I take a picture with my iphone, the date is not downloaded to my picute. Is there a way to get the date put on my pictures.
Dropbox "Camera upload" option just rename the files and looks like this.
-
Starting in 2015 I get the following error when I try to import my photos. "The following files were not imported because they could not be read" -DSC8416.NEF I've been importing the same type of photos with no errors then 2015 came along and now I can no longer import.
The error message is misleading, the problem is that you need WRITE privileges added to the destination directory tree.
Assuming you are using the "date" structure that LR defaults to, find the directory that contains the 2014 folder (the one that works) and add WRITE rights to the parent of "2014".
While you are there, if you want, add "2015" folder to beside "2014" and add READ and WRITE rights to that new directory. -
When I take my phone off charge in the morning I get an info box on the front which has the sound trumpet icon with a line through it and the word Mute. The only way to get rid of it is to reboot the phone any ideas as to how I can stop this happening?
Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
This happens the same whenever I try to install.
To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
My plugin is still showing as out of date.
Is there anything you could suggest. Thanks for your time. -
My iPhone has a protective cover on it and I carry it in my pocket a lot. Quite often when I take it out of my pocket the silent/ring switch is off and I am sure it was on when I put the phone in my pocket. How can this be happening?
Protective cover as in screen protector? This would have nothing to do with the silent switch.
If you're referring to an actual case though... take the case off and see if the problem continues.
It may be as simple as the silent switch being lose, which will require a device replacement to resolve. -
I cannot open my photo booth, the photo booth icon has a question mark on it. I have been using my photo booth without any problems before, what do I do please.
You move it back to the Applications folder or reinstall it from your OS install disk, using Pacifist if needed.
(58223)
Maybe you are looking for
-
JButton Background in 1.4.2
Anyone else noticed that when you set the background of a JButton with Java version 1.4.2 and the L&F of Windows (now XP look and feel) that only the edges of the buttons background are colored? This seems like a bug to me. Is there a way to work aro
-
Hi all, Is it possible to have Oracle Database working on Windows 2000 Server and its client i.e. forms/application running on Linux environment. If so, then will my Developer6i work for installation of client in Linux. And if it works, then how can
-
I am evaluating implementing rebate processing at my company. I would like to know if rebate processing has any capability for the following... Customer X has a rebate program for 1% if they purchase 50,000 units of a group of materials. In order t
-
How to get the query design element meaning with the technical name ?
In BI 7.0 query designer, we got error msg in Transport Connection like: Object 41PPHH3DICYQ56L2XJGXDRSMT is already being edited by user_id Choose 'Display object' or 'Cancel'. How to check what design element is for 41PPHH3DICYQ56L2XJGXDRSMT? And
-
2 ToolTips in an applet ?
I have an applet that draws a graph, I would like to be able to have 2 tooltips that show on 2 different plotted lines. Am I thinking wrongly by trying to implement this with ToolTips? Should I be thinking in a different way of implementing this ?? a