When I touch my apps the screen blinks but nothing happens what can I do?

when i touch an app to start it, the screen blinks but nothing happens. I did refresh that didn't help. What next?

- Try resetting the iPod. Nothing will be lost..
- downoad/install a new app.
- iOS: Troubleshooting applications purchased from the App Store

Similar Messages

Home screen is completely frozen on my Apple TV. I tried to reset and the light blinks but nothing happens after that. Any suggestions?

I tried to reset and the light blinks but nothing happens after that. It won't allow me to move the cursor on the home screen. Any suggestions?

Unplug the device from power and plug it back in.
If it still fails to respond properly, connect it to a computer via microUSB and restore via iTunes.

I dropped my i-pod touch and now the screen is partially whited out what can be done

I dropped my i-pod touch and now the screen is partially whited out what can be done?

Take it to Apple to have the screen replaced.

When trying to update Google Earth Plug in, the screen flickers but nothing happens.

All that happens is the screen flickers but the Update does not download. Repeated clicks on the "Download Update" simply repeats the action.

According to Google, I already have the Plug-in!!
Plug-in updater is wrong????

HT201257 for me it doesnt work , I hold the D key , but nothing happened :( , what should i do to check my Hardware ?

I have MAc book pro 15-inch, Early 2011 , I want to check my hardware , but when I hold the D key , nothing happened
what should I do , if I want to check my hardware?

Try option d.
This will attempt to load an Internet version of Apple Hardware Test.
If this still does not work, you must boot from your original Applications DVD. It is the one bearing the text "AHT version xxxx" on it.

My ipad 2 turns black and shows the rotating symbol for startup but nothing happens what can i do?

my ipadscreen turned black and just shows a rotating symbol for startup but nothing happens. What can i do?

iPad: Not responding or does not turn on
If nothing there helped, time for a restore.
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software

When I try and view a downloaded clip in IE the screen opens but nothing happens

When try and view a downloaded shckwave object in IE a blank screen appears
and the little wheel goes round and round but the clip does not play

Hi Andrew and Happy New Year to you too. Sometimes I get too busy:-) Thanks for the information.
Sometimes the Flash Player 10 ActiveX will install and be listed in the Add/Remove, but for some reason or the other,
the Shockwave Flash Object, the ActiveX Control will not be installed in the browser add ons. In your case since you have version 9 installed, in addition to the above in the add ons there should be Flash9?.ocx as well. The ? mark will be a letter
and most importantly be Enabled. This is a must for Flash Player to work.
It is very easy to get Shockwave Flash Object confused with Shockwave ActiveX Control. The Shockwave Player that you have listed in Add/Remove also has in your add ons an ActiveX Control and they work together. The Flash Player works
together with the Shockwave Flash Object, which is it's ActiveX Control.
The reason I asked you about the DLM is because sometimes after in downloads it does not disconnect, so glad it's not there.
In the Flash folder you should have listed Flash9?.ocx, FlashUtil9?.exe, install.log, Uninstall_ActiveX.exe.
Recheck your add ons(the downloaded now and the have been used) the drop down arrow should show you both. You can tell if SFO is there as described above and if it's enabled.
This link may be helpful to you to read over regarding Security Settings and ActiveX Controls. I wouldn't take any action at this time until we see if you need to.
http://go.adobe.com/kb/ts_tn_19166_en-us
Thanks Andrew

I press the option key but nothing happens ); what am i gonna do?, i press the option key but nothing happens ); what am i gonna do?

when i've installed boot camp i restart the computer and when i'm at the loading screen i hold alt..... nothing happens?

press the option button as soon as you hear the chime, hold it until the progress indicator appears

I changed the Lcd Digitizer on my Iphone since that the light of the screen blinks but stays off, I connect to Itunes and Itunes connects it

I changed the Lcd + Digitizer on my Iphone since that the light of the screen blinks but stays off, I can connect to Itunes and Itunes connects with the Phone.
I don't know what's causing the problem.

Sounds like something is broken. Unfortunately, it's no longer eligible for a discounted out of warranty replacement. Find a competent repair shop or buy a new phone.

2nd generation ipod touch wont turn on. The screen blinks but the apple icon doesn't show up.

I have a 2nd generation ipod touch that I got from a friend. I drove all the way across the country (three day trip) and it worked perfectly. It was in a hard case and has no damages to it. I haven't dropped it or gotten water on it at all. But for some reason the screen wont turn on. It blinks on and off when I plug it into the charger (and theres like a soft clicking noise that I hear when the screen blinks) but the apple logo wont show up. And it doesn't seem to actually be charging. It doesn't seem to actually die all the way either.... It's weird.. but I know no damages have happened to it so I don't know what to do. I've tried to reset it (pressing and holding the home and power buttons) but that wont work either. Help?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

My ipod touch is showing the connect to itunes, however, when i plug it into the computer nothing happens, what can I do?

My Ipod Touch is telling me to connect to itunes, however when I do nothing happens, what can i do?

Try:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Also try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When watching a video, often the Press Esc to return line in the middle of the screen does not disappear. What can I do to remove it?

Often when watching a video, TV show on ABC or Hulu Plus, after going to the full screen, the Press Esc to return line in the middle of the screen does not disappear. What can I do to remove it so it does not detract from the viewing?

Mac Pro - Mid 2010
Processor 2 x 2.66 GHz 6-Core Intel Xeon
Memory 8 GB 1333 MHz DDR3 ECC
Graphics ATI Radeon HD 5870 1024 MB
Software Mac OS X Lion 10.7.2 (11C74)
This is a brand new machine that I just purchased from Apple. It was delivered yesterday
The old computer is an old PowerMac G5, but my OS X install disc is a retail version of 10.5.
I also tried the OS X 10.5 install disc that came with my MacBook Pro (2.6 Ghz Intel Core 2 Dual).
Same issue - nothing but a grey screen when the system tries to boot from the DVD

When i open my firefox,the screen is blank nothing is there.

''locking as a duplicate of https://support.mozilla.org/en-US/questions/1010336''
in config: page i change url as blank. when i open my firefox,the screen is blank nothing is there. only blank screen will display. there is no menu bar,title bar etc..

Do you mean that there are no toolbars visible?
Make sure that you do not run Firefox in full screen mode (press F11 or Fn + F11 to toggle; Mac: Command+Shift+F).
*https://support.mozilla.org/kb/how-to-use-full-screen
If you are in full screen mode then hover the mouse to the top of the screen to make the Navigation Toolbar and Tab bar appear.<br>Click the Maximize button (top right corner of the Navigation Toolbar) to leave full screen mode or right-click empty space on a toolbar and choose "Exit Full Screen Mode" or press the F11 key.
You can use one of these to start Firefox in <u>[[Safe Mode|Safe Mode]]</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
*Help > Restart with Add-ons Disabled
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?

My screen got bigger and when I move the mouse, the screen moves as well. What can I do about this?

Actually as Roam said, you can keypress, Option + command + 8
But i think wat you asking is that you dont want the screen mving when you move the mouse. Right?
For that you can, goto, System Preference -> Accessibility -> Zoom -> More Options...
Once you click more option, you'll get a window. Look at the bottom of the window for 3 options with bullet buttons. SELECT "ONLY WHEN THE POINTER REACHES AN EDGE" and click "DONE"
Viola!!! You're troubl's are over!!!

When I try to download any application from I tune it ask to accept the new terms and condition of itune.and when I accept it it again opens the I tune but nothing happens and iPad returns back to home screen

When I try to download any application from I tune it ask to accept the new terms and condition of itune.and when I accept it it again opens the I tune but nothing happens and iPad returns back to home screen.plz help me

Try resetting your iPad and start again, sometime that clears the problem

When I touch my apps the screen blinks but nothing happens what can I do?

Similar Messages

Maybe you are looking for