When i try and restore my iphone 4s, it comes up with 'could not be restored'
When i try and restore my iphone 4s, it comes up with 'could not be restored, unknown error'
Hi JayHughesIsTheBest,
Thanks for visiting Apple Support Communities.
I recommend the troubleshooting steps in this article if you receive an error when restoring your iPhone:
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Best,
Jeremy
Similar Messages
-
When tried to upgrade iphone 4S from 8.1.2 to 8.1.3 it crushed at the middle.
After it it not let it tern on and cannot make recovery and crush in the middle of the process with "could not be restored. An unknown error occurred (3014)"Hi bahaluly,
Thanks for using Apple Support Communities. Based on what you stated, it sounds like you are not able to update the iPhone. I would recommend that you read this article, it may be able to help the issue.
Get help with iOS update and restore errors - Apple Support
Solve network errors
Related errors: 17, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, 3200, or "There was a problem downloading the software," or "The device isn't eligible for the requested build." These alerts mean that your computer is either having difficulty contacting the Apple update server or communicating with your device.
Check your computer for software or settings that might cause communication issues between your computer and Apple or between your computer and your device.
Cheers,
Mario -
when i try and open itunes a memo pops up saying "itunes could not connect to this iPhone. This device is no longer connected" my iphone is not plugged into my mac so i dont know why its mentioning an iphone nor why i cant open my itunes library?
Each time you connect your iPhone to iTunes, you need to eject it before closing iTunes by clicking on the little "eject" icon shown in iTunes. It seems that sometime in the past, you did not do that.
I'm not sure how to undo the previously done damage, but maybe a reboot of your Mac would help. -
I've redeemed my itunes card and at the top of the itunes stores it states "$20. in your account" but when i try and purchase a song it still comes up with my billing info and dosent pick up the card at all?? plz help me
If the amount of the purchase is close to $21.07, then you need to take into account taxes may be added.
If you go beyond the credit from a gift card the balance will be billed to your credit card account. -
All of a sudden when I try and sync my iPhone or iPad to my iMac it freezes. The beachball rolls and rolls around. I have downlaoded all updates but no fix!
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache
'''[https://support.mozilla.org/en-US/kb/how-clear-firefox-cache How to clear the Firefox cache]''' {web link}
and
* Remove Cookies
'''''This will log you out of all sites you're logged in to.'''''
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Privacy.'''
Under '''History''', select Firefox will '''Use Custom Settings'''.
There is a button on the right side called '''Show Cookies'''.
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?. Then restart. -
I just switch from a Windows 8 machine to a MacPro and when I try and sync my iPhone 5s for the first time it says that sync will erase everything on my phone because it is still synced to my old computer. Any suggestions?
The Apple store wil do this for you.
You can call Apple support and they will help you
You can google it -
When I try and authorise I get this message.The required directory was not found or has a permissions error. Correct this permissions problem and try again, or deauthorize this computer if the permissions cannot be changed. How do I rectify?
iTunes: Missing folder or incorrect permissions may prevent authorization
Mac OS X
Log in to your computer using an administrator account.
In the Finder, choose Go to Folder from the Go menu.
Type: "/Users" (without quotes) and click Go.
If the Shared folder exists
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod -R 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod -R 1777 /Users/Shared
Press Return.
Quit Terminal.
If the Shared folder does not exist
The following steps will recreate the Shared folder if it is missing and ensure that it has been assigned using the correct permissions.
Open Terminal (found in /Applications/Utilities).Warning: This step involves modifying permission settings by entering commands in the Terminal application. Users unfamiliar with Terminal and UNIX-like environments should proceed with caution. The entry of incorrect commands may result in data loss or unusable system software. Improper alteration of permissions can result in reduced system security or exposure of private data. This option requires a non-blank admin password.
Type or copy and paste the following command into the Terminal window:sudo mkdir -p /Users/Shared/
Press Return.
Enter your administrator account password when prompted, then press Return.
Depending on which version of Mac OS X you have, this step will vary:
On Mac OS X v10.5.8 and earlier, type:sudo chmod 777 /Users/Shared
On Mac OS X v10.6 or later, type:sudo chmod 1777 /Users/Shared
Press Return.
Quit Terminal. -
I just got my Mac yesterday. My kids want to access sites that need the adobe player. When I try and download it asks for a password. I do not even remember setting one up? How do i find out what it is?
FYI this is the legitimate Flash Player installer:
This one is bogus:
As X423424X wrote do not download it from any site other than the one he linked.
Adobe does not require a password to download the Flash installer. Generally speaking passwords are not required to download software, unless you must register with the website so as to log in. In that case you should never use the same name and password you use to administer your Mac. -
My Ipad won't let me in when I try and slide to unlock it ...the message is Not Enough Storage...but I can't get in to put more storage on it
Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPad, and sign into your account again.
Hope this helps.
Regards. -
just updated the lion os x, and now when I try to use my optus dongle, it comes up with the message saying that it won't work because Java Runtime needs to be installed. Help?
Have you run Software Update. You have Java already installed, but it needs to be updated.
-
When I try to save, I keep getting the message "The document could not be saved. You don't have permission" - even though I am the Administrator and the Get Info displays "Administrator" and my_name(me)". Also, when I do a disk permission repair, it always repairs the same applications and files. Last night, I did a disk permission repair twice and both times it took a long time and did the exact same repair both times.
Disk Utility won't repair your home folder. Sounds like your home folder permissions are messed up tho. Try repairing them this way by using Lion Recovery.
1. Restart Lion, and before you hear the chime, hold down the Command and R keys.
2. You’ll be at the Repair Utilities screen. Click the Utilities item in the Menu Bar, then click Terminal.
3. In the Terminal window, type resetpassword and hit Return.
4. The password reset utility window launches, but you’re not going to reset the password. Instead, click on icon for your Mac’s hard drive at the top. From the dropdown below it, select the user account where you’re having issues.
5. At the bottom of the window, you’ll see an area labeled Reset Home Directory Permissions and ACLs. Click the Reset button there.
The reset process takes just a couple of minutes. When it’s done, exit the programs you’ve opened and restart your Mac.
Good luck
RM -
When I try to sign into my iMessage account, it pops up 'could not sign in. Please check your network connection and try again'. I've checked my connection and it works perfectly. What can I do?
You could try going into settings then messages and seeing if you have it turned on. You will need to use your apple ID then, hope that helps.
-
im trying to restore my iPhone 5 and its gone into recovery mode and won't go out I've gone on to iTunes it says that its in recovery mode and to restore it after about 10 seconds it come up with could not restore unknown error occurred (9) i wonder if you could help
you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
If that does not work, take in for service
Genius reservation http://www.apple.com/retail/geniusbar/ -
I am trying to updated iTunes on my PC so I can sync my songs onto my iPhone 5, but when I try to update iTunes it says "the iTunes update server could not be contacted. Please check your internet connection or try again later." My internet connection is fine and I've tried mutiple times to update it.
That one can sometimes be produced by LSP trouble:
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
When I try to connect my iPad, I get this message: iTunes could not connect to this iPad. An unknown error occurred (0xE800000A)
Let's try the following document with that one:
iPhone, iPad, iPod touch: Unknown error containing '0xE' when connecting to a Windows PC
Maybe you are looking for
-
I just installed a new HD and and preceeded to test the operation during re-assembly. I also used compressed air to clean dust from fans etc while it was disassembled. After the LCD was initially re-installed (screwed down), there was static video in
-
Condition value in a sales order
Hi, We have a condition type ZLTL (less than truckload) in our pricing procedure and Alt CBV is set to routine 12. Even though there is a record maintained, the condition value shows as 0 in the Item details screen. The condition rate shows correct $
-
Are Gigabit speeds achievable, am I using the right RJ45 plugs?
I recently purchased a AEBS, and am so pleased with it. Wireless printing work flawless and I have not be prone to any problems yet. However, I thought I would try out the Gigabit Ethernet today. I bought a Cat 6 Patch cable with the ends already fit
-
TS2446 Technical support for Iraq ... Apple ID disabled !
Hi there ... I'm using my Apple ID on my old iPhone ... Now I have the new iPhone 6 ... I try to buy an app ... then it's asked me about my security questions ! I try to remember them ... I keep answer until it's shows that my ID is disabled ... and
-
Hello, I try to send a material idoc inbound via WE19 in my netweaver system. I can send an idoc via WE 19, but there is the msg that the function module is not allowed or it that there is no function module für aii_delinf_in. In WE42 I can configure