When I try and share to anything, I get "This item cannot be shared while it is still referencing media on the camera."

When I try and share to anything such as a File or iTunes, I get "This item cannot be shared while it is still referencing media on the camera." I've tried to consolidate all media but I'm not sure what else to try here. If I remove the memory card from my Mac, then the project/movie I made can't "see" the clips. Any ideas?

Hit Command-9 to open the Background Tasks.
Is anything active?
Al

Similar Messages

I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means.

I can't get my project to share. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means. I'm confused because I don't have a camera hooked up to my computer.

may you have directly imported clip to timeline without copying it to local drive..
update project for links and check if missing clips are there..
reconnect it if you have it on local drive..

Message: The following clip encountered an error during import and is still referencing media on the camera:

I am getting this message when I try to import files from Canon C100: The following clip encountered an error during import and is still referencing media on the camera:
These are AVCHD files and it seems to be happening randomly. With different clips as I try to import...happening both with regular importing and with Create Optimized Media...
It just started happening yesterday-never had this problem before and have uploaded countless times with this camera and system. THanks.

Update: OK, I just tried to import the footage into another hard drive (an internal hard drive) and it seems to be going fine now. Maybe something is corrupted on the external hard drive I was importing into...wierd.

Why do i getThe following clip encountered an error during import and is still referencing media on the camera:

When importing in FCPX 10.1.3 I get: The following clip encountered an error during import and is still referencing media on the camera: ??? anyone

I get this sometimes too, when importing from P2 cards. Sometimes it takes me a few tries to get it imported. I have noticed that it seems to work better when I actually mark an IN and Out for the clip, but that's not totally a solution.

When I try and Share a project, I get a Quick Time Error -50 Any Ideas? Apple Care is scratching thier heads.

When I try and Share (export) a project, I get a Quick Time Error -50 Any Ideas? Apple Care is scratching their heads.

Okay, after several hours on the phone w/ Apple Care includiing nearly 10 hours on Wednesday, we finally figured out why I would get a Quicktime Error -50 when I tried to share a project out of FCP X. The problem was in the music track that I had in the project. I ripped a track from an audio CD, put in my iTunes then imported into the FCP timeline just as Apple says to do.
The problem is; iTunes default rippping codec is AAC. FCPX can't handle AAC compression. I had to re-rip the audio CD to a uncomressed AIFF file, bring that back into my project and then FCPX could share the file and do it's own copression.
This was a new discovery for Apple and FCPX.

When I try and leave a review I get this message every time Forbidden (403)

When I try and leave a review I always get this message.
Forbidden (403)
CSRF verification failed. Request aborted.
More information is available with DEBUG=True.

I always get this message when I forget to enable cookies on a Mozilla-site.

Import failed the following clip encountered an error during import and is still referencing media on the camera

This is one of the many error windows I'm getting. This MVI_9935 is from 5DMIII. But I'm also getting the same errors for other files with the exact same error message for Panasonic AF100. All shot at 23.976fps.
* 5D is h.264. They're all about the maximum lengths (of ~30 minutes).
* Panasonic footage is AVCHD wrapped MTS files. Two clips of this kind are about 75 minutes long each.
I have dealt with this problem by doing ALL of the steps I've read so far for each shoot and it takes too long... I'm doing
1) making FCPX archives
2) copying the all of the contents from each card (with the file structure intact) and pasting them onto an external hard drive (eSATA with 3TB space... with a plenty of empty space ~ 1TB)
3) copying and pasting just the video files onto an internal hard drive (separate from the system drive but same as where the project files are)
And I click through each error window (which takes about a full working day or more) and then when I _still_ see missing footage indicated by
that little "video camera" icon on the bottom left (as you can see above). What I do at this point is to:
1) re-import from one of the FCPX Archives, and if this does not work, I
2) re-import from one of the directly copied files.
Sometimes, I need to create a new event and re-import if the clip is still **referencing** the media on the camera.
I did not have this problem **before** FCPX's import window combined both spanned clips and individual files (circa version 10.0.5 or 10.0.6).
Now I have an Evernote notebook dedicated this problem and just from Google Searching, I have gathered 7 notes from different discussion forums dealindg with the same issue.
Some things that are common to us who are having problems:
1) we deal with big files (for long shoots)
2) we either use Canon 5DMIII or mix and match different types of codecs / wrappers.
3) we end up wasting so much time because Apple support is not paying attention.
4) or maybe we don't know how to get support from Apple. I know this isn't a forum where an Apple employee checks. Where can we directly contact Apple about this?

For the 5D clips, copy ONLY the .mov files into a folder on your external drive or wherever else you want to put them and import from there. You can safely ignore the .thm files and other stuff. Pretty easy and you also will have an archive of your clips. For the Panasonic files, copy ALL the contents of the card and use import from camera.
If you want to import from the card to an event - with the 5D at least - you can use a card reader. Don't use the camera itself. It does work but it is slow and cumbersome and card readers are cheap.
Create an event, hit import from camera and the card should show up.
Sorry, not familiar with the Panasonics but some of the other guys at work use P2 cards and I have imported from them a couple of times with no problem using both a P2 card reader and importing directly from the camera via firewire.
I use the previously mentioned method with all my Canon files - 5D2, 5D3, 60D and 7D - and have never had a single problem.
Hope this helps.

Since Maverick update, when I try to share a video I get Error 1 frame. I have duplicated the project, I have deleted all rendered files. I have tried it several times and always gives me a different frame.

Since Maverick update, when I try to share a video I get Error 1 and a frame number. I have duplicated the project and tried to share. I have deleted all rendered files and then render again. I deleted all rendered and then tried to share it before rendering. Nothing works. I shared the project a couple of weeks ago and was fine. I only changed a small clip and can't share to burn a dvd.

What software version? What computer?
Trash preferences. Switch off background rendering. Trash project and event render files. Do not render. Export. Do not do anything on the computer during export. Make sure App Nap is switched off in the Finder.

When I try and open adobe illustrator I get a pop up message saying "To open "Adobe Illustrator CS6" you need to install the legacy Java SE 6 runtime."

When I try and open adobe illustrator I get a pop up message saying "To open “Adobe Illustrator CS6” you need to install the legacy Java SE 6 runtime." it also says "Click “More Info…” to visit the legacy Java SE 6 download website." When i click more info it transfers me to an apple page which never loads, its just a blank page. I downloaded Java SE 6 like it says it needs but it did nothing. All of my other Adobe programs such as bridge, dreamweaver, lightroom, Photoshop, indesign, and flash all work except for illustrator. What can I do to fix this?

Go to Apple and look for the Java for OSX 2014-001 link. Download from there and install it.

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

I am trying to use imovie and i have never had this problem before. All of my videos are completly grey and when you try and play them all i get is a black screen but i still hear audio. Can you please help and tell me what i need to do. Thank you

Make sure all of the videos used in the project that is having that problem are from the same event. If they are from multiple events, move them all into one event.

HT1977 When I try and download an app, I get a message "MZCommerce.CreditBalanceMismatch.Mobile_message". This is even for free apps, and I do have plenty of credit. Can anyone help please?

When I try and download an app, I get a message "MZCommerce.CreditBalanceMismatch.Mobile_message". This is even for free apps, and I do have plenty of credit. Can anyone help please?

With a standard account you need a valid payment method even for free apps.
From the message it sound like there is something wrong with your account or some of the information you entered in the account is not correct.. Verify that the information is correct and then if still problem contact iTunes.
Contact iTunes

When I try and log into imessages, I get a message that says my email address is already in use

When I try and log into imessages, I get a message that says my email address is already in use. What do I do?

Yo,
If u use [email protected] to log in (ur apple id) then u have to use a different one like [email protected]
Mark this as helped if it does... thx

When i try and download an app i get an error message saying 'error 1004 please try again later' what is this, and what shall i do?

When i try and download an app i get an error message saying 'error 1004 please try again later' what is this, and what shall i do?

That's what I found about error 1004 in this article: http://support.apple.com/kb/TS1275
Error 1004 and 1013: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to default on Windows. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
Try to restore from another known-good computer and network.
If the errors persist on another computer, the device may need service.

I keep getting connection failed when i try and log in, I keep getting connection failed when i try and log in

I keep getting connection failed when i try and log in, I keep getting connection failed when i try and log in

Do a malware check with several malware scanning programs on the Windows computer.
Please scan with all programs because each program detects different malware.
All these programs have free versions.
Make sure that you update each program to get the latest version of their databases before doing a scan.
*Malwarebytes' Anti-Malware: http://www.malwarebytes.org/mbam.php
*AdwCleaner: http://www.bleepingcomputer.com/download/adwcleaner/ http://www.softpedia.com/get/Antivirus/Removal-Tools/AdwCleaner.shtml
*SuperAntispyware: http://www.superantispyware.com/
*Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
*Windows Defender: http://windows.microsoft.com/en-us/windows/using-defender
*Spybot Search & Destroy: http://www.safer-networking.org/en/index.html
*Kasperky Free Security Scan: http://www.kaspersky.com/security-scan
You can also do a check for a rootkit infection with TDSSKiller.
*Anti-rootkit utility TDSSKiller: http://support.kaspersky.com/5350?el=88446
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

When I try to open images I am getting this message: "The file "image.jpg" couldn't be opened because you don't have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

When I try to open images I am getting this message: "The file “image.jpg” couldn’t be opened because you don’t have permission to view it." "Which I've tried - but it's not responding, plus its with all images now. Can anyone help?

Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.iBooksX
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

When I try and share to anything, I get "This item cannot be shared while it is still referencing media on the camera."

Similar Messages

Maybe you are looking for