When I try and view a downloaded clip in IE the screen opens but nothing happens
When try and view a downloaded shckwave object in IE a blank screen appears
and the little wheel goes round and round but the clip does not play
Hi Andrew and Happy New Year to you too. Sometimes I get too busy:-) Thanks for the information.
Sometimes the Flash Player 10 ActiveX will install and be listed in the Add/Remove, but for some reason or the other,
the Shockwave Flash Object, the ActiveX Control will not be installed in the browser add ons. In your case since you have version 9 installed, in addition to the above in the add ons there should be Flash9?.ocx as well. The ? mark will be a letter
and most importantly be Enabled. This is a must for Flash Player to work.
It is very easy to get Shockwave Flash Object confused with Shockwave ActiveX Control. The Shockwave Player that you have listed in Add/Remove also has in your add ons an ActiveX Control and they work together. The Flash Player works
together with the Shockwave Flash Object, which is it's ActiveX Control.
The reason I asked you about the DLM is because sometimes after in downloads it does not disconnect, so glad it's not there.
In the Flash folder you should have listed Flash9?.ocx, FlashUtil9?.exe, install.log, Uninstall_ActiveX.exe.
Recheck your add ons(the downloaded now and the have been used) the drop down arrow should show you both. You can tell if SFO is there as described above and if it's enabled.
This link may be helpful to you to read over regarding Security Settings and ActiveX Controls. I wouldn't take any action at this time until we see if you need to.
http://go.adobe.com/kb/ts_tn_19166_en-us
Thanks Andrew
Similar Messages
-
When i try and view my slide show on idvd the screen is black?
hey,
whenever i open idvd and i try put photos in it to make a slide show the screen is just black and when you try and preview it you can hear the music but you cant see anything??
i really need help it is urgent!
thanks to any one who can!Have you run apple's software updater recently?
http://discussions.apple.com/thread.jspa?messageID=6262843�
http://discussions.apple.com/thread.jspa?messageID=5816892� -
When i try to load any page on Mozilla 28 the page opens but i get additional tab saying The address isn't valid The URL is not valid and cannot be loaded. I tried everything from reseting Firefox ,completely new installation of firefox to about.config and nothing worked it's been two days now since the problem started and i am pretty frustrated and desperate as i try to fix the issue so please help me with some solutions????
Big thanks in advanceStart Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Delete a possible user.js file and numbered prefs-##.js files and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
You can use this button to go to the Firefox profile folder:
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Preferences_not_saved -
When I touch my apps the screen blinks but nothing happens what can I do?
when i touch an app to start it, the screen blinks but nothing happens. I did refresh that didn't help. What next?
- Try resetting the iPod. Nothing will be lost..
- downoad/install a new app.
- iOS: Troubleshooting applications purchased from the App Store -
I'm trying to download a game from the app store but nothing happens
im trying to download Deus Ex: ultimate edition but nothing happens it just stays at 0% and i meet all the requirements i dont know what to do
HI..
So your Mac is running v10.7.3 or later? Just making sure. Your profile indicates the iOS 5.1.1 ...
If you have anti virus software installed, disable that.
Make sure there's enough free space on the startup disk since the app is 15.51GB.
Click your Apple menu icon. From the drop down menu click About This Mac then select Storage from the menu.
Make sure there's a minimum of 15% free disk space. -
When trying to update Google Earth Plug in, the screen flickers but nothing happens.
All that happens is the screen flickers but the Update does not download. Repeated clicks on the "Download Update" simply repeats the action.
According to Google, I already have the Plug-in!!
Plug-in updater is wrong???? -
Since installing 7 I cannot get facetime and imessage to activate. I have taken all the steps that have been recommended in supportbut still nothing. I get a text of characters that mean nothing everytime i try. Please can anyone help?
Thank you!Error 1604: This error is often related to USB timing. Try changing USB ports, uninstalling and reinstalling USB ports, and other available USB troubleshooting steps (troubleshooting USB connections, device not recognized properly, computer won't recognize a FireWire or USB device). If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode, put it into Recovery Mode.
Restore and wait for error 1604.
When prompted, click OK.
Close and reopen iTunes while iPhone remains connected.
iPhone should now be recognized in Recovery Mode again.
Try to restore again.
If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
Above is from:
http://support.apple.com/kb/TS3694 -
When I try to download any application from I tune it ask to accept the new terms and condition of itune.and when I accept it it again opens the I tune but nothing happens and iPad returns back to home screen.plz help me
Try resetting your iPad and start again, sometime that clears the problem
-
Safari is giving me a missing plug in message when I try to view things like movie trailers. The trailers play on Firefox, so I'm not sure what's missing from Safari. I have Safari 5.0.6 and Mac OS X 10.5.8.
I just noticed that it won't play some newsite videos anymore either. What plug in do I need to update (if that's the problem)?
-
My Ipad won't let me in when I try and slide to unlock it ...the message is Not Enough Storage...but I can't get in to put more storage on it
Settings > iTunes & App Stores > tap your Apple ID: > View Apple ID > Country/Region
If you find that it is set to the correct region, log out of your iTunes Store account, restart your iPad, and sign into your account again.
Hope this helps.
Regards. -
will not export photo. pop up says Some export operations were not performed. This file could not be opened(1). Also when I try to add a key word to photo
the screen keyboard opens and I do not have a touch screen monitor.I have uninstalled LR6 and re-installed and it still does the same thing??????<moved from Downloading, Installing, Setting Up to Photoshop Lightroom>
-
I'm getting "can't add volume. Unknown error occured" when I try and add my Mac hard drive to the privacy settings
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
When I try and start iTunes after trying to intall the 11.4 update on my Windows 7 laptop, it says to reinstall iTunes and "Windows Error Code 193" I tried ave the same failed response. Can someone help?
Hi inharmony35,
If you are having issues with iTunes after an attempted update, you may want to try the steps in the following articles:
Apple Support: Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Apple Support: Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Regards,
- Brenden -
Hey guys, when i try and log in to itunes, even though the details are correct it is showing up as an error and not allowing me access to my account.. could anyone help?
what is the error?
-
When I try to start up my macbook, it makes the startup noise, but won't go any farther than the white/grey screen. I've tried the commands and nothing has worked. Please help
Hey marleyrose,
Thanks for the question. I understand that you are experiencing issues with your MacBook. The following resource may provide a solution:
Mac OS X: Gray screen appears during startup
http://support.apple.com/kb/ts2570
Thanks,
Matt M.
Maybe you are looking for
-
Database can not startup!
Suse linux 10 Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production Sat Feb 24 01:21:07 2001 I: oracle: [activate] [opt/HUAWEI/cgp/omu_mirror/workspace1/server/bin/db/dbcmd *'shutdown abort'] (ORA-03113: end-of-file on communication
-
Capitvate 8 for 64bit windows downloaded, but "install now" button in akamai downloader has no effect. How to install?
-
Stop communication channel after data delivery
Hi all, I have a communication channel of type JDBC. The channel should be started and stopped via external control. The problem is that I don't know when the data transfer is completed in order to stop the channel. Or is there a functionality that a
-
Scenary SOAP SYNC - XI - RFC - RFC
Hi, I need to implement a scenario in which you have a web service synchronous which invokes two RFC, one after another and the two responses from the RFC is the response of web service. As I can development this requirement? Thank you very much for
-
Dps app builder sign in not working
working