When I try to boot up my hp Pavilion p7-1451 from an USB drive I just get the HP Logo

I just recently upgraded my OS to Windows 10 and followed the procedure to create a recover and system backup and restore Flash Drive. When I try to boot up my HP Pavilion p7-1451 from an USB drive I just get the HP Logo. Do I need to change any settings on the HP?

Use the esc key when you see the HP logo, it should give you a Startup list, then hit F9 to get a Boot device list, then choose your usb drive from that list and hit enter.

Similar Messages

I purchased and downloaded Adobe Photoshop Elements 13 from Amazon and when I try to open it, it's asking for a "Redemption Code". Where do I get the that code?

When I try to open the Adobe software, it asks from the Redemption Code when on an Adobe web site. The instructions that came in the download say that this is a 24 digit code of numbers and letters. The only thing I got from Amazon was an Order Key, which is also 24 digits, but only numbers and the software didn't like that code… I walked through the steps on the Adobe web site to get my redemption code, but the final step before giving me my redemption code is to enter my redemption code… I have to enter the code for them to give me the code…??? Am I missing something??? Do I get this "Redemption Code" from Amazon, or from Adobe?

You would get the redemption code, or perhaps even the serial number, from whomever you purchased the software from, apparently Amazon, so talk to them. This wouldn’t be the first time they’ve sold something that didn’t have all the numbers needed to license it.
A redemption code is something that is usually on the inner disc packaging if you purchase the media in a box, and there is a barcode on the outside of the packaging that must be scanned at the checkout register to activate the hidden inner code so you can redeem it at home on that website. This is what happens if you buy PSE from a brick-and-mortar store like Best Buy. I don’t’ know what happens if you purchase the downloaded version as I have never done that.
A redemption code is 24-digits of letters and numbers that you enter into a website to get a serial number, once and only once. The serial number of only 24-digits, no letters, is what you enter into the software during the install or when you run it and it asks if you want to register or run in a trial mode—whatever the exact phrasing is.
In any case it sounds like you don’t have either a redemption code or serial number—although perhaps something is listed on the purchase confirmation or your account online at Amazon or even in an e-mail from Amazon.

My macbook pro won't boot, I just get the apple logo but no progression.

P.S. (pre script)
I'm in the UK
I think my macbook's Hard-drive is capooot, here's my symptoms, windows takes 10-15 minutes to boot and when it does every program I open becomes non responsive every 20 seconds or so, so it's unusable. I've tried playing Arma 2 (which use to run fine) and windows gives me an error about cyclical redundancay checks failing (which is apparenty a HD error) and OSX boot at all (I've been waiting 2 hrs and it won't get past the apple logo). when OSX did boot some of my apps in launch pad didn't have a logo on them (presumablly because they didn't load).
anywho, I ran a disc fragmentation analysis in windows (despite not trusting windows to fix any of my problems ) and it said 22% fragmented but I only installed windows about a week ago (and have only 1 7GB file I think).
I have had troubles installing windows and have had to re-install it twice, each with progressivly more trouble, 1st time, bootcamp installed it for me (easy!). 2nd, bootcamp couldn't partition it, however disc utility managed it . 3rd time, neither could partition it (probably due to fragmentation I presume) so I had to back up OSX, erase my HD, partition it, install OSX, restore OSX files, install windows 7.
Anyway, does this appear to be a HD problem? My mac is about 8 months old so I still have 28 months left of my warranty (I got a free 3 year warranty because I'm a student, top tip people ) So what do I do to hopefully get a replacement HD? WHAT'S THE NUMBER? (I capslocked because the thing is long and that's the main point).
I've tried the express lane thingy but the page doesn't load when I enter my serial number (I've even downloaded safari on my mum's computer to see if it'll load on that) :/

The three beeps mean, I think, self-test has found memory problems.
Barry

I have updated on line when I was prompted to do so, and now my phone won't turn on it just shows the itunes logo and the usb plug on the screen What do I do to get all my icons and everything back to normal. i will lose info if I hit the restore button.

My phone is not coming on except for the usb cord showing in the screen with an Itunes logo after doing an update that I received on line when putting my phone into the station for the night, I saw that there was an update so I said yes. Then this happen. Could someone please help me here, because I do not want to restore or I will lose everything I have with numbers and music in my library. Please advise and respond to me. I use my phone for work as well and can not get the contacts up or anything except for this itunes and usb showing on the screen.
Thank you,
Diana

Hi there briana_webb82,
You may find the troubleshooting steps in the article below helpful.
iOS: Unable to update or restore
http://support.apple.com/kb/HT1808
-Griff W.

In iMovie when I try to share a project to a file on an external hard drive it will work the first time but subsequently it says it is sharing but gives no time and file name and in fact just sits there not sharing the file.

I have iMovie 10.0.4. I want to transfer some old DV tape videos to MPEG 4 files to be stored on a 4 TB external drive. I successfully imported the video to iMovie, created a project by moving all captured files into a project and the first time I shared the project to a file it worked as expected. Every subsequent try to transfer another video would fail to transfer. When I clicked save it gives the warning that it is too big for iCloud, iso I click create on this computer. The progress circle comes up with no indication of progress. The show activity drop down just says sharing to "file" no file name as in the first one and indicates no time remaining. In fact it just sits there apparently doing nothing. I'v tried it a half dozen times, deleted everything and started over. It transfers the first project to file and then nothing on additional tries. What do I have wrong, am I missing something?

In iTunes 11 uncheck the preferences setting in in the iTunes Preferences panel "Advanced > Copy Files to iTunes Media folder when adding to Library"

When i try to connect my iPhone 4S into iTunes through wifi or USB it will not connect the other thing is when i hook up my iPad into iTunes it will connect through wifi but not USB? Now is this a issue with my iPad and iPhone or is this iTunes?

When i bought my iPhone and my iPad they both were on iOS 7.0.2 i updated them shortly after thinking the new iOS 7.0.4 was better. i see its not but they both worked great with iTunes before and after the update. My question is why is my iPhone not connecting to iTunes? it will not connect through USB or wifi and i know that the setting to do that is turned on. my iPad connects through iTunes through wifi but not USB. This isnt making any sense but i wanna know is this a iTunes issue? or is it my phone and iPad??

This can sometimes be the result of a faulty/damaaged USB sync cable. Do you have another cable you could test it out with?
B-rock

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks :)

When i try to boot itunes, screen goes black and a message pops up and says not compatible with the visual elements. how do i fix this? itunes wont even open at this point. please help. thanks

Let's first try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode

I have a new l7 macbook pro running snow leopard. When I try to boot into windows7 32bit, I get either a blue, black, or flickering screen. Then I have to physically shut down and try again. At that point it will load correctly. Any help?

I have a new l7 Macbook Pro running snow leopard. When I tried to to install windows 7 32 bit on bootcamp, I kept getting a flicking black and blue screen when it tried to install. (Tried several times). I finally downloaded the bootcamp windows support to a flash. I inserted that and finally got it installed. Now when I try to boot into windows I get either a solid black (sometimes blue) or flickering screen and windows will not start up. If I then physically shut down the mac and restart, it will finally boot into windows where it tells me that windows was shut down unexpectently and once I click start windows normally, it will boot up. That will generally let me boot into windows for the remaining of the day. The next day, the same thing happens again. I have tried reinstalling several times, and the same thing keeps happening. It is not my windows disk because it installs flawlessly on the mid 2008 macbook pro. Anyone know how to fix this?

I own HDM 2011. But they have products that aren't listed or hard to find too.
Recommending Pro version for one user's needs:
http://www.wilderssecurity.com/showthread.php?t=297756
Pro vs HDM 2011 feature comparison
http://www.paragon-software.com/home/hdm-personal/comparison.html
Forum topics:
http://www.wilderssecurity.com/showthread.php?t=297756
http://www.wilderssecurity.com/showthread.php?t=303155

I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver.

I have usb driver in may macbook pro 15 retina. When I installed windows 7 and try to download windows support into a CD, boot camp always said it couldn't find my usb driver. My mac version is 10.8.3

Welcome to the Apple Support Communities
Install the Windows support software from the USB drive. Note that Boot Camp Assistant, in OS X 10.8.3, doesn't support the option to burn the Windows support software into a disc.
Instead, you can try a different thing. Start in Windows and download the Windows support software in it > http://support.apple.com/kb/DL1638 Then, decompress the file and run the Boot Camp drivers installer.
If you can't access to the Internet in Windows, start in OS X and download the Windows support software from the same link. Decompress the file, right-click the folder which will show up after decompressing the file and select "Burn". Finally, start in Windows and install the Boot Camp drivers

When i try to boot usb yosemite , i have this message (sudo: /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia: command not found)

when i try to boot usb yosemite , i have this message (sudo: /Applications/Install OS X Yosemite.app/Contents/Resources/createinstallmedia: command not found)

You are getting a kernel panic because you are trying to boot the computer with a Tiger DVD. That model requires 10.6.3 - Snow Leopard. You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
For Mac App Store: Apple - Support - Mac App Store.
For iTunes: Apple - Support - iTunes.

Getting an error when I try to boot from my snow leopard disk

I want to install Snow Leopard on a partion on my new iMac. But when I try to boot from my old Snow Leopard-startup-disk all that happens is that I hear some beeping noise from the iMac.
Would apreciate any help.
Best Regards
Andreas.

If your machine shipped with Lion, most likely you cannot install SL, since it won't run on it. Details in Don't install a version of Mac OS X earlier than what came with your Mac

I get a blue screen when I try to boot into the recovery mode

My computer froze and refuses to boot. When I try to boot from a recovery partition (both on the main hard drive and an installer on on an external hard drive) the screen turns blue (sometimes with vertical stripes). Any suggestions as to what's causing this. It will be another week before I can go to a Genius Bar.

My computer froze and refuses to boot. When I try to boot from a recovery partition (both on the main hard drive and an installer on on an external hard drive) the screen turns blue (sometimes with vertical stripes). Any suggestions as to what's causing this. It will be another week before I can go to a Genius Bar.

What does it mean when i have a flashing folder with a question mark in it when i try to boot up?

what does it mean when I have a flashing folder with a question mark in the middle of it when I try to boot the interface?

It means the system cannot find a bootable OS. Reinstall OS X.
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

My phone when i try to boot it up its keeps going to the apple sign and turns right back off. how do i fix this?

My phone when i try to boot it up its keeps going to the apple sign and turns right back off. how do i fix this? If its not on charger it wont start up at all. but if its on charger. it goes to the apple screen and turns off and on repeatedly Any suggestions?

Restore the phone --> http://support.apple.com/kb/HT1808
If this does not resolve the problem you have a hardware problem.

When I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

when I try to boot my macbook pro the startup manager doesn't show any drives. How can I solve this issue?

Please confirm what version of OS X you are running - I doubt it is the ancient OS 10.1 !

When I try to boot up my hp Pavilion p7-1451 from an USB drive I just get the HP Logo

Similar Messages

Maybe you are looking for