When i try to burn a blu ray it says failed

when i try to burn a blu ray disc it says failed i have burned a few before without any trouble

OK. So create a new user account – or trash your preferences – and see whether that resolves the problem. If you trash the prefs, you may want to use Digital Rebellion's Prefence Manager.
And just to confirm, Share options other than disk burning work OK?
Russ

Similar Messages

I keep getting a "Transcoding error" when I try to burn a blu ray. I have elements 8 and the clip is only about 8 1/2 minutes long

I have 4gb of ram and running Vista. Dont know why I keep getting this error, its not like I'm burning a full 2 hour movie.
any help would be appreciated.

b
Thanks for the update.
Please remind me, are you still working with Photoshop Elements 8 and Premiere Elements 8.0/8.0.1, and are your plans to incorporate your new internal hard drive into the Windows Vista 32 bit computer setup?
In Photoshop Elements 8, the path to the Scratch Disks should be Full Editor/Edit Menu/Preferences/Performance and the available Scratch Disks choices there. See Description under the Scratch Disks list for overall suggestions.
In Premiere Elements 8.0/8.0.1, the Scratch Disks will be found under the program's Edit Menu/Preferences/Scratch Disks.
Just do not move, delete, or rename any files/folders that are source media in a saved/closed project.
Major consideration is to check the new drive periodically to confirm that the drive letter is ot changing on you.
Did you know that you can import a raw format image into Premiere Elements, but you need to install the Camera Raw plug-in in Premiere Elements as well as Photoshop Elements. But, in a 32 bit operation and dealing with the huge dimensions of the raw image, image size is going to be a consideration in Premiere Elements 8.0/8.0.1.. The program will not let you import a still image with a total pixel count greater than 16777216 pixels.
ATR Premiere Elements Troubleshooting: PE: Maximum Still Image Size
More later. Sounding good.
ATR

When I try to burn to a cd it says checking media and than nothing happens

When I try to burn to a cd from one of my playlists it says checking media and than nothing happens.
Could someone please help me?

come on someone help me

When burning to blu-ray gets 99% done then error "device not ready"

I have Elements 11 and an ASUS Combo burner. I can burn to DVDs but when I try to burn to blu-ray it gets done encoding and compiling then at 99% switchs message to "device not ready". The computer sees the drive and the disc is formatted. Any thoughts on why Elements stops right when at end before actually burning to the disc?

I don't know the answer but I suspect Blu-Ray disks are not supported in PSE. I haven't tried it personally but I will have to try it one of these days when my computer is repaired to my satisfaction. I was without a machine for nearly two weeks and now I am using a borrowed one from a friend.

ENCORE CS6 gives error message during the burning of Blu-ray Disc

I did it again - upgraded my Production Premium CS5 to CS6.
I will not forget CS4 that never came to work. It was not a workable version, but at best an Alfa or maybe Beta version.
I was therefore naturally afraid to upgrade my reasonably well functioning CS5 version, but did it anyway.
My fears kept unfortunately connectors. Audition CS6 scratchy and crunches a lot when I change Audio Device from MME to ASIO. It should be noted, that none of my other programs have this problem neither my Soundbooth nor Audition 5.5 which I fortunately still have installed. So it is only Audition CS6 that crunches with ASIO4ALL.
Encore CS6 is also a problem child. When I try to burn a Blu-ray Disc I get, in the final phase, following error message: Blu-ray Error: "device error", Code: "CreateStcSequence: Fail to write M2S file"
Fortunately, I can open the project file in my Encore CS5, which do not have the same problem. Encore CS6 cannot be used as a standalone application - I still need to have a previous version installed to complete my projects. It is not fair.
Unfortunately I can see that many others have the same problem. Even worse, however, that Adobe still has not come with an update or fair solution of the problem - after so long.
It annoys me infinitely, I every time have to spend so much time on the Internet in an attempt to find solutions to remedy Adobe problems. These are programs I have paid dearly for - exactly twice as much as others living in the U.S. pay - just because I live in Europe.
If there is a user who has some useful suggestions I would appreciate it very much.
I must complain about my bad English.
Thank you in advance.

Hi Jim,
ISO files also works for me, but that's not what I paid for.
So far I use just the previous version CS5, but hope at some point to get CS6 to work.

CS6 Error Message When Burning a Blu Ray Project to DVD

Hi,
I'm trying to burn a Blu Ray project to DVD and I'm getting this message when I try to build the project:
The project is an excerpt from a larger one and contains only 2 video files and no menus. However it's particularly worrying because the project from which this is an excerpt is large and complex. I have created it as a Blu Ray project but my final deliverable is DVD. I really don't want to have to rebuild as a DVD project because it took half a day to link up all of the menus and chapters.
Is there something I need to do in my encode settings?
Thanks in advance.

Thanks for your reply John.
It's extremely frustrating that this is the case. I'd have started with a DVD project in the first place had I not read this: http://helpx.adobe.com/encore/using/building-finished-project.html , specifically the following excerpt:
"You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format."
Reading that gave me the confidence to go ahead and build as a Blu Ray. I now have to find another half day to rebuild the project as a DVD.
Thanks again for the information.

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine. Anyone know the problem with blu-ray? HELP!

Encore CS4 (version 4.0.0.258) will not finish burning to blu-ray disc when using a menu template. DVD burning works fine with menu template. Anyone know the problem with blu-ray? HELP!

For CS4 you must update the Roxio component, especially with Win8
http://forums.adobe.com/thread/1309029 http://docs.roxio.com/patches/pxengine4_18_16a.zip
http://corel.force.com/roxio/articles/en_US/Master_Article/000012592-PX-Engine-Description -and-Download

Enocore CS5 error when trying to burn to blue ray disc

My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?

Enocore CS5 error when trying to burn to blue ray disc
My project consists of 4 AVCHD clips imported separately into Encore as timelines and then I deleted the timelines to keep just these assets. I built a new timeline and added these three clips to this timeline. Three of the AVCHD clips are on the timeline with a total time of about 3:30. The fourth is a 30 second clip used for the motion menu background. The file size is 22.95 GB. There are 39 chapters in the project, the top page (page 0) has three buttons linking to chapters 1, 21, and 30 (the start of each of the clips). The other pages of the menu have 6 video buttons per page linked to chapters. All of the clips when highlighted will lead to the project setting "Do Not Transcode" (which is what I want) and I am buring this to a 25GB blu ray disc. When I checked the project everything seemed okay- no error messages. I then went to build the disc and after about 20 minutes I got the following error message:
"Blu-Ray Object: "<Menu>NTSC_FISH top menu",Error:"device error",Code: "2",
Note: "Too many primary video streams in clip (Spec Table 9-3,Annex B)"
The menu name is NTSC_FISH topmenu. Any ideas what the problem is and how I can fix this?
I went to the original motion menu source and saved it as Microsoft AVI (file name: Premiere pro avi for menu.avi) instead of AVCHD hoping that might help and then brought that file into Encore and linked that as the motion video for the top menu (the other menus don't have a motion background). I tried to animate the buttons for all the menu pages. When I click on the Premiere Pro avi for menu.avi asset the options show for DVD Transcode automatic and for Blu Ray Automatic (for transcoding). The file shows as 720X576 and it is 34 seconds long. The top menu is checked to animate buttons and I can uncheck it if I want, the submenus-start at page 1- have the animate buttons grayed out but checked and I can't uncheck these even if I wanted to. When I tried to burn this to disc, it got further along- burning 13.15 gb to disc and then I got the following error message:
Blu-ray error:File already exists",Code:"6", Note:Video buffer underflows. Total bitrate is too high near time = 1321.253267 seconds-
I am running Windows 7 64 bit, 2.4 ghz processor Quad core, 6 gb of memory and 69.1 gb free on my external hard drive and 29.7 gb free on my c drive. I have an NVIDIA GE force 8500T card. Any ideas?

Trouble burning to Blu-Ray with PE 7.0

I have tried for the last few months to burn a 2 hour video to Blu-Ray. I ahve burned shorter videos to a rewritable blu-ray disc with success but this video is just barely over the max (24/sec) quality. Even when I shorten it to the hgih quality length it still freezes up and crashes. I have made each chapter a saved file, so there are only 40 files and two items on the menu (move & slideshow). I have tried all the trouble shooting and even called adobe support. After a couple of hours they suggested I increase my virtual memory to 8000/10000 I have a quad-core processor and 4 gigs of RAM running XP pro. I just want to burn to blu-ray and DVD and cannot. Is their a trick that I don't know or is this product just worthless when it comes to burning. I tried changing the names of my files from m2t to mpeg and that didn't work either. I am soooo frustrated...
I'm willing to try just about anything. Has their been any more luck with the new 8.0 version--it sure came out quick since 7.0

My original format is AVCHD. Since I had so many cuts/edits/transitions I saved wach chapter as a high def file (I think H.264 1920x1080i) It saved it as a xxx.m2t file. I then used those 40 files in one 2 hours movie. That is where I am having trouble. I have pretty much doen every trouble-shooting thing that they list and the closest thing I get to is a 16 hour-encoding process that fails at 98%. I have even sucessfully saved the entire 2 hour movie as one huge file, but I still can't get it to burn. Like I said I have been able to burn shorter movies successfully, but there is something wrong or different with this one. I have tried several different things to change it (probably 20-30 times) and it either crashes while encoding the 2nd of 6 menus or it "unexpectedly quit" I am so frustrated with this. I had great success with version 2.0 & 4.0 The only thing I haven't tried is burning my 7.0 project in 4.0 (I uninstalled it after 7.0) I think 4.0 burns to blu-ray but it won't edit avchd like 7.0 I am currently successfully burning (Fingers crosses) in 8.0 trial version and will be really upset with adobe if they simply fixed their product and I have to shell out another $100 because they didn't get it right when they first released it. Has anyone else had this many problems buring long projects. Like I said I reduced the size of the project down to full qulity (24.00/sec) and that still doesn't work. I'll try anything.

Project in PRE10 will burn as blu-ray but will not burn as DVD.

I created a project of still images in PRE10 with the NTSC-HDV-HDV 1080i 30 settings. I burned the project as a blu-ray and it turned out great. I tried to burn the same project to a DVD and it goes through the encoding process fine. However, when it gets to actually burning on the disk it completes about 5% and then abruptly finishes saying the burn is complete although no files are written to the DVD (it is still blank). The same thing happens when I try to burn the project to a folder (no files are created). I have created other projects with this setting and am able to burn to either blu-ray or DVD. Any ideas on why this happens?

As your Blu-ray results are good you must have large scale images in your project. What are the pixel dimensions of your still images?
Your project is High Definition 1440x1080i, whereas DVD is Standard Definition 720x480. This means that PRE has to scale down the images. Unfortunately PRE is not too good at downscaling and can choke the program.
This tips & tricks article has a lot of information about this issue: Large Still Images into PE - One Workflow.
That article, at 111 items, is rather long. In a nutshell though it recommends still images be scaled in photo editing software to the target size - 720x480 in your case or, if you want to do some pan & zoom, around 1000x750.
So for your particular case you should resize your large images. If you do this in exactly the same proportions as your HD project images you could then replace those in the existing timeline with the smaller and perhaps your project will then complete burning.
[EDIT] Also check out this FAQ entry: What resolution should my photos be in Premiere Elements?
Message edited to include FAQ entry.

Issues burning compatible Blu-rays

I had some complaints that some of the Blu-rays which I recently produced in 1080i were not working on some Blu-ray players. In researching the issue I learned that many Blu-ray players require an AACS Folder in order to function. However, the Blu-rays produced by Premiere Elements 13 do not have that folder. Of course, firmware upgrades may fix the problem on the players, but one can't expect their customers to do that in many cases. Nor should they. Then I learn that one can burn an ISO to get the folder onto the disk. Of course when I try it, I find that it doesn't work on files bigger than 1.3 gigs. This is a huge problem and I have a job to get out. Is there a solution? This was a low budget job, done to line up some large jobs in May and June. This is the fourth generation of Premiere Elements and there is no reason there should compatibility issues of this sort. Please restore my faith in Adobe, I am in the process of likely converting to Lightroom an upgrading to full Photoshop from Elements, however at the moment I am very disappointed because I feel this issue is intentional.

morrisst
Thanks for the reply.
Do not copy the CERTIFICATE Folder from the Premiere Elements burn to Blu-ray disc, only its BDMV Folder in the plan described above.
ImgBurn should generate the CERTIFICATE Folder....to be sure....
Tools Menu
Settings
Build Tab
Page 2
and look for the Blu-ray options and have a check mark next to them
....Create BDMV Folders
....Create CERTIFICATE Folder
My computer Blu-ray player plays
a. Premiere Elements burn to Blu-ray disc after burn to in Premiere Elements
b. The Premiere Elements BDMV + CERTIFICATE Folders with or without the AACC Folder
The following may be of interest
ATR Premiere Elements Troubleshooting: PE 13: Blu-ray ISO Image and AACS Folder
The AACC Folder may not be the answer. If not, is there anyway you can compile
player data for those reporting problems regarding playback of these discs?
We will be watching for further developments as your schedule permits.
Best wishes
ATR

Burning to Blu Ray disc (25GB)

Hi,
I'm not understanding some of my searches on this.
I am trying to burn files from Arpeture and iPhoto....they both are around 80 GB and I have 24GB discs.
However when I try to burn to the disc the first time (with 24GB of data) it stated a warning: Too large to fit on disc. Remove some files and try again.
I did that and it still gave me the same warning. I tried on a few of my computers and I received the same warning. I'm using a External ODD&HDD device to burn.
What am I doing wrong?
Thanks for your help.
G

I used Virtual CD to emulate BD burner and burned to iso image. I burned the iso with Imgburn at 4x on same brand BD disc and its all good. Used Premiere's same session to burn directly on a TDK rewritable BD disc and it went smooth. Both discs can be read by Windows. This time I disabled anti-virus on next Windows startup. I also disabled firewall, stopped Windows automatic update and Windows automatic maintenance. Sometime they do thrash the hard drive and cause failure when burning disc. Those two discs that had failed were I guess due to buffer issue as I got few "waiting for buffer to recover message.." in Imgburn and also maybe it was burning way faster than the disc could handle. I saw it burning whole 18 GB in just under 15 minutes for a 6x disc. My latest burning to BD discs have no issues reading by Windows.
Windows did see the blu-ray burner when I had issues with first two discs and I burned on DVD disc as well for same project. It could play dvd fine but I had problem with those two discs only.
The only thing is I am yet to test the menus with blu-ray discs. I download Powerdvd and WinDVD trial version but Powerdvd gives black screen and WinDVD won't start after the splash screen nothing happens and it disappears. I tested with Leawo and it does show the main menu with background music but the virtual remote doesn't work. I will try on someone else's computer or PS4 to test the menus. I think it should be fine with menus.
Thanks

How do I burn a Blu-Ray disc with menus?

I have a 38 minute project comprised mostly of HD clips (.m2ts, .MP4 and a few .MPG). I try to render the project to Blu-Ray with Premiere Elements 12, it takes approximately an hour to reach 98% with message "Encoding Media", then switches to "Compiling Media" and freezes there (I let it go for 6 hours with no end in sight). Task Manager shows that it is not using any CPU cycles anymore, while it was using up to 96% of the CPU before it reached that point. I've been able to render this project to a DVD, to Folders on my HDD and to AVCHD successfully on a DVD.
For a test, I tried a 1 minute project with the same results. It wasn't until I removed the disc menu that I was able to burn a Blu-Ray disc. I am running project on a PC with Windows 7 Home Premium, 64 bit, an AMD Athlon II x4 635 Processor, 2900 Mhz, 4 cores, 4 logical processors with 4 GB of RAM. I have found a number of references to the 98% completion but no real solutions. Any assistance would be appreciated as I would like to produce a high definition disc with menus...

ATR and jerry9146, thanks for the replies. I am using version 12 of Premiere and, when I attempt to update, it tells me that I have the latest version. I am fairly new to Premiere although I have used other video software before. My motherboard supports up to 16 GB (4 slots) so I could try increasing the memory which would probably speed up the rendering process. I'm not so sure that not having enough memory would prevent it from completing the rendering process but who knows. Task Manager shows CPU usage in the high 90% and shows physical memory in the mid 50% during the rendering process...
My software always finds the media and lets me know if I have the wrong disc in (I had inadvertently inserted a DVD instead). I have tried both H.264 1440x1080i NTSC Dolby and H.264 1920x1080i NTSC Dolby. It does not have a choice for 1080p full HD.
I always cancel out of the Windows popup asking "How do you want to use this disc?" as I assume that Premiere will let the system know. Is that correct?
The movie menu that I chose for this project is a fairly simple one, Faux Widescreen from the General category. It contains 1 main menu and 3 scene menu pages containing a total of 17 scene markers which I inserted myself with Add Marker.
I had already taken out the Stop marker as I had read that it doesn't work for Blu-Ray anyways (and thought that that might have been the culprit). Spacing is good and there is no button overlap.
jerry9146, I have successfully burned an AVCHD file to a DVD thru Premiere and the quality is pretty good. Does the workaround that you suggest produce a Blu-Ray quality file?

Framerate problem after burning PAL Blu-ray

Hi folks, bit of a rookie here. Usually try to work my way around things but this is a new area for me and I'm a little stumped!
Basically I'm using Encore CS5 to burn a Blu-ray from footage rendered from Final Cut. The footage is from a Sony HDV camera that records 1440x1080 50i. After the transcoding and burning was succesful I found that while looking good the footage was playing at 50fps on both a PS3 and a Panasonic player. I've tried leaving the transcoding settings on automatic and setting them manually to 1440x1080i 25 High Quality MPEG-2, both times the framerate was running at 50fps. So am I missing something obvious here to get the Blu-ray to playback at 25fps? Thanks in advance for any contributions!

50i is still 25 fps
but if you want proper 25p you should upscale your material to 1920x1080 25p, and be shure the setting is no fields (progressive scan)
Good luck

Burning to Blu-ray

I am getting the following error in Encore CS6 when trying to burn to blu-ray:
First play not set
and
Title Remote not set.
Where can I find these?
Thanks,
Joe

First play is usually a menu but can also be a bit of footage you want to play before the menu appears.
Basically ist what you see first when playing a BD or DVD.
Double click on the words Title Remote not set.
This will bring you to the disk set up
Set the Title Button. i usually set it to Default
Title Remote lets the viewer use the Title button on the remote control.

When i try to burn a blu ray it says failed

Similar Messages

Maybe you are looking for