When i try to enter a site that requires a password, i get a popup window that requires a password from firefox. I want to remove that!

When I go to a website that requires my password. I get a firefox popup that demands a password. But I dont know what it is expecting. I have uninstalled firefox and then reinstalled but the pest persists. How do I remove it?

The popup is caused by spyware or alien extensions on your browser. Here's a guide I found that helps remove the popup - [http://www.fixnowsupport.com/3/post/2013/06/how-to-fix-the-authentication-required-popup-message-in-firefox.html Remove Authentication Required Popup in Firefox]
The worst part is the popup appears continuously even after closing it several times.

Similar Messages

When I try to open a site I normally access i'm getting a bar that says,Firefox has blocked this site from opening another window then on the right side of the bar gives option to allow or not. Never did that before. Thanks

When I try to open a site I normally access i'm getting a bar that says,Firefox has blocked this site from opening another window then on the right side of the bar gives option to allow or not. Never did that before. Thanks

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

I am trying to download a paid membership of CC to a second computer. No matter what I do, when I try to download, the site just goes to a blank page. This happened the first time, too, but I finally tried a permutation that allowed me to download. This t

I'm trying to download a paid membership of CC photoshop onto a second computer. No matter what I do, the site sends me to a blank page instead of downloading. How can I get out of this endless flight pattern?

No, this reply is not helpful. It simply generates this little gem:
"This service requires the conversion feature to be enabled.
Configure conversion ?"
And the same clicking on buttons that makes nothing happen and going around in circles with the escape key.

When I try to burn a DVD in Premiere Elements 12 I get an Internal software error%0, line %

When I try to burn a DVD in Premiere Elements 12, I get an Internal software error %0, line %1. This is the first time that I have tried to use this program.

As suggested in the original reply in January, you will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

hard drive on my mac died, installed new hard drive. When I try to sync my phone for the first time, will the computer wipe all the songs, photos, ibooks from my phone?

Yes because that information is not located on the hard-drive of your new mac! If it is purchased content from the store, than this issue isn't as bad as it looks!
Here is a link explaining how to get your previously purchased content back:
http://support.apple.com/kb/HT2519
You also want to authorize your Apple ID account on the computer by following these instructions as well:
http://support.apple.com/kb/PH1730
Basically this link explains to go to the top left corner of your screen where you will see file, edit, view etc! Click on Store in that section and click on authorize this computer, also you want to make sure that the computer will not automatically sync by going to iTunes in the top left corner, just to the right of the apple symbol if iTunes is selected, and go to prefrences, and here you will see back up! Right under the back-ups has an option explaining to prevent devices from automatically syncing which is good cause you may be able to transfer your purchases from there which will put your content into the computer, and if that happens than we don't lose anything
Hopefully I was of some help:)

When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?

When I try to delete my site, I enter my information to confirm my identity. The confirm widow freezes, and does not go to the next step. What can I do, please?

Hi,
Did you try any other browser? is it hosted on Business catalyst? If yes and if you are using custom domain, then login to admin panel using system domain (mysite.businesscatalyst.com) and then try to delete.
Let us know if that works

HT5517 I want to photo stream pix from my iMac to apple tv. When I try to enter the iCloud account name and password, the systems tells me that terms of service have changed and won't let me proceed. What's that about.

I want to photo stream pix from my iMac to apple tv. When I try to enter the iCloud account name and password, the systems tells me that terms of service have changed and won't let me proceed. What's that about?

You need to reset the password for the "old" account, and then use that to turn off iCloud. Then you will be able to sign in with your new ID.
You can reset your password at iForgot.apple.com.
If you don't know the answers to the security questions, you will need to start there.
http://support.apple.com/kb/HT5312
-If you established a rescue email address, there will be a link on the "Passwords & Security" page of id.apple.com. Clicking the link will send the reset to your rescue email address (NOTE: This is not the same address as your Apple ID email)
-If there is no link on the page, then you didn't establish a rescue email address. Contact AppleCare at 800.694.7466 (If you are in the US), and ask for account security. You will need to answer some questions to verify your identity, AND you will need access to a computer to generate a temporary support pin.
-If you are not in the US, click http://support.apple.com/kb/HT5699 - Apple ID: Contacting Apple for help with Apple ID account security
HTH

Hi, I just installed CS6 master collection from order history and when I try to enter Serial Number it tells me that: Serial number you provided is valid, but qualifying product can not be found on this computer. Then it gives me options under drop down m

Hi, I just installed CS6 master collection from order history and when I try to enter Serial Number it tells me that: Serial number you provided is valid, but qualifying product can not be found on this computer. Then it gives me options under drop down menu but Master Collection CS6 is the only one not appearing in a drop down menu.

Your CS6 must have been purchased as an upgrade. What it is asking you to select/provide is the name/serial number of the previous version you purchased that qualifies you to install and activate the CS6 upgrade version... this would be likely be one of CS3 thru CS5.5.
Error "This serial number is not for a qualifying product" | CS6, CS5.5, CS5
http://helpx.adobe.com/creative-suite/kb/error-serial-number-qualifying-product.html

I just dowload and pay the new LR6. I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

I already have the LR 5.7 on my PC with OS 8.1 64bits - when I try to enter the serial number Adobe informs me that there are no eligible product available - the list doesn't include the LR6 version ?

thank you very much!
everything's allright
bye

I get ssl_error_handshake_unexpected_alert when i try to enter in my school site, before the Update Worked fine

Before the Update i could login with no troubles now i cant i get ssl_error_handshake_unexpected_alert error and nothing when i try to login ...
https://www.si.ips.pt/ests_si/web_validacao.validacao

hello Zakazy, this seems to be a faulty server configuration - please report that issue to the webmaster of your school, so that they can fix it...

Intermittently, when I try to enter the internet through Safari, it freezes up and won't fully load in the internet. If I turn the iMac off and start it again, it seems fine. I have had my internet provider check everything from their end.

Intermittently, when I try to enter the internet through Safari on my Imac, it freezes up so that the loading line only goes 1/3 way across and then stops. If I shut down the computer and then restart, it usually loads fine. I have had my internet provider check eveything form their end and it is fine. I suspect that I have a software conflict. My provider and others have said that I should use FireFox because Safari is not that stable. I am running OSX Maverick on my system. This was a recent download. Is anyone else having this problem and have you any ideas how I can correct it.

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on principle, not because of anything suggested in this comment. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help to identify which such modifications you've installed, as well as some other aspects of the state of the system that may be pertinent.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: You copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, paste again. That's all there is to it. Details follow.
You may have started the computer in "safe" mode. Preferably, these steps should be taken while booted in “normal” mode. If the system is now running in safe mode and is bootable in normal mode, reboot as usual. If it only boots in safe mode, proceed anyway.
Below are instructions to run a UNIX shell script. It does nothing but produce human-readable output. However, you need to be cautious about running any program at the behest of a stranger on a public message board. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. If you can't satisfy yourself that these instructions are safe, don't follow them.
The script will line-wrap or scroll in your browser, but it's really a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
If you have more than one user, and the affected user is not an administrator, then please run the script twice: once while logged in as the affected user, and once as an administrator. The results may be different. The administrator is the user that is created automatically on a new computer when you start it for the first time. If you can't log in as an administrator, just run the script as the affected user. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign ($) or a percent sign (%). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Triple-click anywhere in the line of text below on this page to select it:
clear; PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && o=$(sed 's/^/ /' <<< "$o") && printf '\n%s:\n\n%s\n' "$1" "$o"; }; PC () { o=$(egrep -v '^[[:blank:]]*($|#)' "$2"); PR "$1"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; PN () { [[ $o -eq 0 ]] || printf "\n%s: %s\n" "$1" $o; }; a=$(id | grep -w '80(admin)'); [[ "$a" ]] && sudo true && r=1 || r=; { [[ "$a" ]] || echo $'No admin access\n'; [[ "$a" && ! "$r" ]] && echo $'No root access\n'; system_profiler SPSoftwareDataType | sed '8!d;s/^ *//'; o=$(system_profiler SPDiagnosticsDataType | sed '5,6!d'); fgrep -q P <<< "$o" && o=; PR "POST"; o=$(($(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); PN "Pageouts (MiB)"; s=( $(sar -u 1 10 | sed '$!d') ); [[ ${s[4]} -lt 90 ]] && o=$( printf 'User %s%%\t\tSystem %s%%' ${s[1]} ${s[3]} ) || o=; PR "Total CPU usage"; [[ "$o" ]] && o=$(ps acrx -o comm,ruid,%cpu | sed '2!d'); PR "Max %CPU by process (name, UID, %)"; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; PC "cron configuration" /e*/cron*; o=$(crontab -l | grep [^[:blank:]]); PR "User cron tasks"; PC "Global launchd configuration" /e*/lau*; PC "Per-user launchd configuration" ~/.lau*; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); PN "Restricted user files"; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist") || ID=; ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; o=$(system_profiler SPFontsDataType | egrep "Valid: N|Duplicate: Y" | wc -l); PN "Font problems"; for d in {,/}L*/{La,Priv,Sta}*; do o=$(ls -A "$d"); PR "$d"; done; [ "$r" ] && { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l | grep [^[:blank:]]); PR "Root cron tasks"; }; o=$(syslog -k Sender kernel -k Message CReq 'GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; exit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately, leaving the Terminal window empty. If that doesn't happen, press the return key.
If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter your password, the script will run anyway, but it will produce less information. In most cases, the difference is not important.
The script may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "[Process completed]" to appear in the Terminal window.
You can then quit Terminal. The output of the script will have been copied to the Clipboard automatically. All you have to do is paste into a reply to this message by pressing command-V again.
Please note:
☞ This procedure is all copy-and-paste — type only your login password when prompted. When typing it, you won't see what you're typing. Make sure caps lock is off.
☞ Remember to post the output. It's already in the Clipboard when you see "[Process completed]" in the Terminal window.
☞ If any personal information, such as your name or email address, appears in the output, anonymize it before posting. Usually that won't be necessary.

TS1702 Facebook quits when i try to enter 'event' page using iPad Mini

I have this problem with my iPad mini but my iPhone doesnt have this problem. Facebook quits when i try to enter into 'event' page in facebook and it happens few times already. Need help! Thank you so much! =)

To prevent Firefox from displaying form autocomplete suggestions, you can turn off that feature using the about:config page.
In the address bar, type or paste '''about:config''' and tap the Enter/Return key.
I suggest bookmarking this for easier future access.
In the search box, type or paste '''formf''' and tap the Enter/Return key.
Scroll down to '''browser.formfill.enable''' and tap the Toggle button to switch it from true to false.
That's it. Does it work on Facebook?
''The about:config preferences editor in the mobile version is similar in principle to the desktop version but many of the preferences available on the desktop version have no effect in mobile. This one I only tested on one site, but it seems to work.''

When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
== This happened ==
Every time Firefox opened
== I updated to one of the firefox versions (Not sure which one it was)

Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

When I try to enter a time machine with Snow Leopard backups Lion I get an error code -6584 ... how to fix?

Hi.
I had a first gen time machine with backups all on Snow Leopard.
This died (power supply), and I bought a new time capsule, because to fix the old one would cost nearly the same amount.
Since, I have started using Lion, and backed up onto my new time capsule in Lion.
Unfortunately, there was a file I deleted that I really need for a Logic Audio project, that is only present on the old time capsule.
I got the old time capsule fixed, so it powers up. I even extended my current wireless network with it. I can see inside it -- all the data that I dragged onto its HD in the past is present, and the "Sparse Bundle" containing the data for the time capsule save-states is present too.
Now, when I try to "Enter" my old time capsule, I get this error message:
I tried entering the time machine via WiFi and via ethernet, to no avail.
Can anyone help me to access these old save states on my old "snow leopard" time capsule?
I was thinking maybe I need to try to access it from a machine with Snow Leopard?
Please help.
Thanks in advance.
JM

I have the same issue. Does anybody know why this has happened

When we try to push our site live, it says we have a trial account and need to upgrade to a paid account. We already have a paid account!

What do we need to do to have it "see us" as a paid account?

Hello,
Please check one more fat.
Please go to Muse preference and check which account is selected for "Publish with Account" if its not the correct email please change it to the correct one from the drop down.
Here is the way to reach there
MAC: Click on Adobe Muse CC Next to apple icon and select Preferences from the drop down (Make sure Muse is launched)
Windows: Click on Edit > Preference
If this is also correct then I would need to check your ID. For that we need to wait for Monday.
Also keep me posted about the steps i mentioned above and if possible try to share the error screenshot when you try to Publish the site.
(also make sure you have upto date version of creative cloud to check that please launch Creative cloud application > Sign out and sign in again. If its not up to date you will be prompted to upgrade it.) To sign out of creative cloud click on Gear icon at the top right > Preferences > Accounts> Sign Out of Creative cloud
Regards
Vivek

When i try to enter a site that requires a password, i get a popup window that requires a password from firefox. I want to remove that!

Similar Messages

Maybe you are looking for