When I try to install Itunes updates, an error code always comes up; HRESULT: 0x800736FD. What do I do to resolve this? Thanks.
I have tried un-installing and re-installing, but it hasn't worked.
The error code is coming up as HRESULT: 0x800736FD.
That's a less common one (in this context).
Perhaps try the following Microsoft document:
Windows Update error 80246005
Does that get your Windows Updates installing again? If so, stock up on the ones you're behind on (restarting the PC if requested to do so). You might have to do this in more than one batch (depending on when the 80246005 started happening and how far you're behind).
Once you're up to date, try the iTunes install again. Does it go through properly this time?
Similar Messages
-
When I try to install iTunes onto my new computer, it says "This installation package could not be opened. Verify that this package exists and that you can access it or contact the application vendor to verify to verify that this is a valid Windows Installer package." I can save iTunes onto my computer, but when I click run, this is the message that appears. How do I get this thing installed?
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
When I try to install iTunes it says error 2.
So I was going through my computer and uninstalling unnecessary thing,but then I uninstalled iTunes and some weird other apple soft wares. I tried reinstalling it an it said error 2 apple application support not found uninstall then install again. I did that and it didn't work please help
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features(Later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
C:\Program Files (x86)\Common Files\Apple\Apple Application Support
and paste into:
C:\Program Files (x86)\iTunes
The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
tt2 -
When I try to install my updates an "error occurs" error 103? what do i do.
Need help. My updates will download but fail to install.
uninstall, clean and reinstall per, Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
-
I try to burn a CD and error code 4450 comes up. Why?
When I try to burn a CD thr error code 4450 comes up. Itried burning a CD with only one song and the same thing happened and this was a song that I never burned before.
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
Dell Computer Corporation Dimension 2400
iTunes 10.2.2.12
QuickTime 7.6.9
FairPlay 1.11.17
Apple Application Support 1.5.1
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 3.4.0.25
Apple Mobile Device Driver 1.55.0.0
Bonjour 2.0.5.0 (214.3)
Gracenote SDK 1.8.2.457
Gracenote MusicID 1.8.2.89
Gracenote Submit 1.8.2.123
Gracenote DSP 1.8.2.34
iTunes Serial Number 0012A8B0127865D8
Current user is an administrator.
The current local date and time is 2011-05-04 17:13:30.
iTunes is not running in safe mode.
WebKit accelerated compositing is disabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) 82845G/GL/GE/PE/GV Graphics Controller
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: d0ee8348cfa5127a2c597b1cbb4c6f65
iPodService 10.2.2.12 is currently running.
iTunesHelper 10.2.2.12 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** CD/DVD Drive Tests ****
LowerFilters: PxHelp20 (2.0.0.0), drvmcdb (1.0.0.1), sscdbhk5 (1.0.0.1), Cdr4_xp (8.0.0.212),
UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.2.0.1),
E: SONY CD-RW CRX216E, Rev PD01
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
Writing CD text is turned on in the preferences. If you’re having problems burning CDs, try turning this preference off.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive E: SONY CD-RW CRX216E on CDR media at speed 12X.
-
When I try to install the update for iTunes, I keep getting the message "the application attempted to load the C runtime library incorrectly. Contact the vendor. I don't know if it's related, but my Microsoft Outlook is totally f*k up. What's going on?
Hey I finally got an older vesion of itunes to work!!! 10.7 x64 for windows 7
After uninstalling all apple products even quicktime
I had to delete everything from (program files, and program files x64, program data,)
And all downloads from apple, and I went in to search deleted other stuff from apple, and itunes
But definently not my itunes library and Playlist
Down loaded 10.7 x64 for windows 7, but checked (do not start when done)
Then I emptied my recycling bin and restarted my PC
I ran geek tech tool box same as reg cure pro, also PC Tools registry cleaner, and CC Cleaner
Then I emptied my recycling bin and restarted my PC
And wallah... It finally works, and I Love the older version anyways.
Easier to download and transfer music!!!!! -
when i try to install itunes i get an error that says to verify that i have sufficient privilege to start system sevices. I am the system administrator.
Hi annibu757,
If you are having issues with iTunes after an attempted update, you may find the following article helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Regards,
- Brenden -
When I try to install iTunes, I get an error message that Apple Application Support is required.
When I try to install iTunes on my Windows 7 PC, I get an error message that Apple application support is needed. What do I need to do?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if Apple Application Support won't install normally. You could try this approach first.
tt2 -
I have ITunes installed on my PC which runs Windows Vista in support of my IPad. When I try to install the update for ITunes 10.7 version, it says it can't find the "itunes64.msi" file. How do I correct this, or where can I find a download for the itunes64.msi file?
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
When I try to install iTunes I receive the following error message: "Apple Application Support was not found".
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
I get a error when i try and install iTunes!
When i try and install iTunes i get this error
Its really frustrating because i bought a 200$ iPod Touch and then i cant put music on it
Any help wold be apprecated.
Ive tried repairing all my .Net
I have un installed and reinstalled all my Apple Related stuffOkay ... it's sounding a bit like you've got something stuck in your "pending update" machinery (the stuff that gets invoked when an update requires a restart). That can interfere with iTunes installs, although it's more common to see a lot of 8000FFFF errors in the Update History when that's going on.
Rather than experimenting with 8000FFFF instructions, I think instead we should try getting you on the radar screens of some Windows Updates specialists.
Try posting over at the Windows Update forums at Microsoft Answers:
http://answers.microsoft.com/en-us/windows/forum/windows_update
In your post there, describe the error message you're getting when installing updates, and the other symptoms (otherwise updates are apparently okay, and so on).
If the Microsoft Answers folks get you past the Service Pack message, can you then install the new iTunes version? -
when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
When I try to install Itunes, I get this error: (translated from Norwegian) There was a network error while trying to read from the file: C: \ windows \ installer \ iTunes.msi I have tried many times to reinstall, but nothing helps, please help me.
(1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
(2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
(3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
(4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
(5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
when i try to install itunes 10.6.3 for windows vista i get "error microsoft VC*80.CRT,type="win32",version="8.0.50727.6195".publicKey token="1fc8b3b9a1e18e3b",ProcessorArchitecture="x86" what should i do?
same problem. tried the ff fixes from microsoft but no joy
http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
other ideas would be appreciated.
cheers -
When I try to install itunes 10.5.2, I get the following error message "The installer has insufficient privileges to modify this file c\progamfiles\itunes\itunes.exe and won't install. help
Okay ... so it's not one of the cases of bodged up ACLs on the Apple folder in Common Files. (That's been underlying a few of the recalcitrant E7W5s.
Just in case, let's try the fixit from the following document:
Fix problems with programs that can't be installed or uninstalled
Maybe you are looking for
-
How do I remove the graphics card of my computer from the blacklist?
I want to activate Adobe Flash Player hardware acceleration, but my card is blacklisted, and reproduces any other content without any instability, but she was put on the blacklist, and not is because, and not worked before in older versions, but with
-
ITunes won't automatically open
When syncing my iPhone, on my phones page I have the box checked to open iTunes when phone is plugged in but it's not opening. Why not?
-
Why do I get hundreds of multiple images in organizer browser?
why do I get hundreds of multiple images in PSE 8? Is there a fix?
-
I have a strange issue at hand. I am trying to apply a formatter to format date to one of the fields but the formatter function never gets invoked. I tried with XMl and JS views but non of them seems to work is there any trick I am missing. I am also
-
A large majority of the thumbnail photos in iPhoto show up as either blank or a white dotted lined box. If you click on the photo it shows full size just fine. How do I fix this problem?