When I try to log on - says "playlist created by newer version of Itunes"
I had my Itunes deleted accidentally. I should be able to copy the songs back onto my computer, but I have now reinstalled Itunes and every tiime I try to open it up, the message appears "Playlist created by newer version of Itunes" and it fails to load..... Help please
Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad
Similar Messages
-
Hi my and my husbands iphones are no longer syncing to itunes but have in the past. When i try to download the latest version of itunes it won't let me do it until I load and earliers version....help
No problem.
Okay ... Try updating your iTunes using an iTunesSetup.exe (or iTunes64Setup.exe) installer file downloaded from the Apple website:
http://www.apple.com/itunes/download/
Does that install go through okay? If so, can you connect the phones now? -
Trying to connect my iPhone6 to my old iMac with 10.6.8 MacOS, and synch up the music. It says I need a new version of iTunes. When I try to upgrade the iTunes on my iMac, it says, it is already the latest version. What do I do now?
The current version of iTunes is 12.x.x and requires OS X later than Snow Leopard.
-
I just bought iphone 5 and my itunes says I need itunes 10.7 But when I look for upgrades it says I have the current version of itunes. HELP!
I am so sorry I am frustrating you. This is the first time I have used this community and am leanring as I go. I am not able to see the entire post that you leave, unless I look at it on my phone (email)--I am so sorry. You have no idea how much i appreciate your help. Yes, I see that I can get the later version of OS software, but its not availabe for immediate download. My only options appear to be having it shipped, or going to the store to purchase. And if you know of another way that I can access all of my itunes library music on my new phone withouth using itunes, I would love to hear about it.--thanks and again i am so sorry for frustrating you.
-
When i try to search for contact or create a new one the keybord does not come up
when i try to search for contact or create a new one the keybord does not come up
Try going to settings to General to reset to 'reset all settings'
This should do the trick!
Good luck -
when I sync my iphone it says that there is newer version of the software but when I click the 'update' button I am told that 'itunes' is the latest version? There seem to be a few apps that are not compatible with my phone and I am wondering if that is because it is not up to date or beacuse it is a 3gs?
Snow Leopard requirements here:
http://support.apple.com/kb/SP575
I recommend no less than 2GB's of RAM. There is no download for SL, you must purchase from Apple, $29 at any Apple store. Leopard is no longer sold by Apple. About the only place you can find a retail disk is eBay, however the prices are getting ridiculous. -
When I try to install QuickTime, I get the message "newer version of QuickTime already installed". I uninstalled QuickTime. I have also gone into the registry and deleted all references regarding QuickTime. I really don't want to have to reinstall Windows just to be able to install QuickTime. I have used QuickTime for years and want to use it again. What do you suggest I do?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATION" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up").
In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC. Now try another QuickTime install. Does it go through properly this time? -
my itunes cannot be update on my windows xp. so i delete my itunes and install new, but now i got new problems, it says "The file itune.library.itl cannot be read because it was created by newer version of itunes." so how can it be solved?
Hello Bebyida,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
http://www.apple.com/itunes/download/
Best of luck,
Mario -
I have just just installed a new version of itunes. When i tried to run the new version it came up with the message "The file ituneslibrary.itl cannot be read because it was created by newer version of itunes.
I installed the new version because itunes had not recognised my ipod nano 5G, and told me to reinstall. Itunes selected which version to install, so I don't understand what is going on. To add insult to injury it installed a pile of malware which I am still trying to get rid off.
Any advice would be helpfulHello Davedamoclese,
Go through the below link to Remove iTunes and all its components from your computer first and then Re-install fresh copy of iTunes on your computer.
http://support.apple.com/kb/HT1923
Note : DO not delete iTunes Library as it contains all your iTunes data, please go through the below link for where it is saved on your computer :
http://support.apple.com/kb/ht1391
You can download the latest version of iTunes from the below link :
http://www.apple.com/itunes/download/ -
Itunes won't start. says "cannot be read be read. created by newer version of itunes"
I recently restored my iphone and also updated itunes. now, when i try to open itunes it says, "the file itunes library.itl cannot be read because it was created by a newer version of itunes"
Check out the "More Like This" section to the right.
In the future, it's faster to find a resolution by searching the forums prior to posting. -
Why can't i purchase a movie from itunes.Ido have my apple id and password but when i try buying from my apple tv it keeps saying the id is invalid.
Go to the itunes store on my computer and update your apple id and i did but it keeps saying the same thing?contact itunes support
-
I can't get my iPhone 4s or my iPad 2 to sync with itunes on my pc. My very ancient ipod nano works fine. I get told that the version of itunes is too old. I have tried on 3 occasions to download the update, and while it doesn't say there has been a problem with the download I continue to get the same message. I do get a warning that itunes is not properly installed and that i won't be able to burn cds. I have tried uninstalling itunes completely and reinstalling but that doesn't work either.
does anyone know what I'm doing wrong?Have you run windows update? That could prevent iTunes from properly installing. Also, try with your antiVirus and firewall disabled. What version of Windows are you running?
OS X is the operating system on the Mac.
Message was edited by: ssschmidt -
Where are all my playlists on the new version of itunes
I have 30 plus playlists and when I download the new version they are all gone. Can anyone help a non techie find them again?!
Welcome to the Apple Support Communities
They are not gone. Open View > Show Sidebar, so the sidebar will show and you can select the playlist you want on it -
Downloaded latest version of itunes. Noticed that there is no provision to burn a playlist to CD under the file menu as in past versions. Although the help menu still references this function. Is this an oversight ?
Also noticed that the new itune program which interfaces with the iphone 5 , will only play videos bought through itune store. Where previous versions would play any video, or have I got wrong??
Any help would be appreciated .
Thanks
Oldsalt 94Someone gave me the Mac Format magazine (Jan 2013), which contained a complete guide to iTunes 11.
One section was "Get the old look back". It stated that it was possible to tweak the interface to get the old look back by:-
1. Be on Music view and select Songs tab at top of window.
2. Click on the View menu. (Mine was hidden, but if you click on the dropdown arrow in the top left-hand corner the option is there to show the Menu Bar).
3. Click on Show Sidebar, then click on Show Status Bar.
This should make iTunes look like the old version.
Hope this helps others :-)
Slightly happier Apple! -
Before you ask, i tried going through the third-party add-on document and opening it up in safemode did not fix it. Also, I am running it as administrator and that is not helping either.
I DID IT! I FIXED IT, FINALLY!!! At least it worked for me. Here's what I did: from Control Panel/Programs/Programs and Features/Uninstall or Change Program, I right-clicked on iTunes and selected Repair. After that ran and completed, I went to Computer/Local Disk (C:)/Program Files. From the list, I right-clicked on iTunes and selected “Run as Administrator.” After that I tried to purchase music from iTunes, and it worked! I hope this makes sense and works for you. Good luck!
Maybe you are looking for
-
Tighter Integration with Active Directory User Groups
I just wrapped up a Jabber deployment with IM&P 9.1(1) and J4W clients 9.1(3). The customer asked me if it is on Cisco's roadmap to allow groups in Active Directory to be pulled into the Jabber client. The primary business case is to allow those in
-
Embedded "multipart/encrypted" HTTP Request?
Hi, I am using 'httpclient.jar'. I am able to successfully send a normal HTTPRequest and receive the response using the 'MultipartRequestEntity' class. Now, I need to send an Embedded HTTP Request as mentioned below. Kindly suggest how can I send an
-
Hi All, Everyday we run a gl process. Gl posting is taking more 1 hr. Same way 4 gl posting run during gl process which is causing performance delay. I see in the the log file that below stage is taking time. glpibr.concurrency() 02-MAR-2013 08:13:03
-
Ref:Logging the DML operations on a schema
Hello, I want to log the DML operations on our Master Schema(This schema is accessed by 4-6 applications apart from there own application schemas). I want to log the DML operations done by x.application. Is there any easy way to do it. One solutions
-
Up for something new in Java - tabs and executables.
Hey again, Ive grown quite confident in my basics for JAVA and now want to try some new things. I want to make a piece of java that i could actually open like somekind of program, preferably (like) a .exe file, Are you aware of any way to acomplish t