When i try to open a pdf file it opens as a word document and then a window pops up saying file conv
When I try to open a pdf file it opens with microsoft word which I can't view. Then a window pops up with "file convertion - permissioning.pdf
could you tell me how to rectify this,
Thanks
Your file association is corrupted; reinstalling or repairing Adobe Reader will likely fix it.
If you want to fix it manually, tell us your operating system & version.
Similar Messages
-
When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.
Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
Be well... -
I have Windows 8 64 bit. iTunes works fine with my iPHONE but when I try to go to the iTunes store it loads to about 80% and then the message "iTunes has stopped working"
COPY QTMovieWin.dll FROM c:\program files (x86)\common files\apple\apple application support\ INTO c:\program files (x86)/iTunes"
-
It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume. When we try to play songs, it acts like it's going to play and then goes back to the play list. Restored the device and still no sound.
Try A and B
(A) Restart iPad
1. Hold down the Sleep/Wake button until the red slider appears.
2. Drag the slider to turn off iPad.
3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
(B) Reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected. -
everytime i try installing big app like FIFA and DEAD SPACE it get half way through installing then a window pops u saying cannot download this app at this time can anyone help?
I suggest trying the update again after an hour or two. Sometimes, the notice that an update is available comes an hour or two before the developers actually sends the revised app out to be downloaded.
-
ok i installed new iTunes version 10.3.1.55 and when i launch itunes it says 'iTunes has stopped working' i get to my problem history this is whay i found
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunes.exe
Application Version: 10.3.1.55
Application Timestamp: 4deec351
Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Fault Module Timestamp: 4ddeb575
Exception Code: c0000005
Exception Offset: 00250000
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional Information 1: fd00
Additional Information 2: ea6f5fe8924aaa756324d57f87834160
Additional Information 3: fd00
Additional Information 4: ea6f5fe8924aaa756324d57f87834160
PLEASE HELP ME!!!!Fault Module Name: MediaToolbox.dll
Fault Module Version: 1.0.694.7
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post:
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever since I did that my itunes won't open any more. Itunes starts but before anything loads a window pops up saying that the prograam has encountered a problem and sh... -
I did see the security download window and entered "run", but it only got so far and a window popped up saying "problem with download, can't proceed". What to do?
This happened to me, too. If I remember correctly, I had to set wither iTunes or my computer to download files one at a time instead of all at once. I don't remember how I set it to do this, though. I also remember that I had to delete the files and downloads and restart them all after I did this. Sorry I couldn't help more.
-
whaen i try to sroll on images on a website that has a gallery and where there is a description up top and a image in th middle and more txt on the sides the scrolling is extremly choppy when i use the arrow keys to scroll
Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
It looks like iPhoto has lost the connection between the thumbnails and the original image files.
This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
Try first to rebuild your iPhoto Library:
If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
Select "rebuild" from the first aid panel. This may take a while for a large library.
Can you now see your photos again?
If not, rebuild the library with iPhoto Library manager as described by Old Toad: Re: iphoto crashed -
Can't access Google 'shopping' search. It pulls up for a quick second then gets replaced by this prompt: (function(){})();(function(){})();
Now that I think about it I'll bet it's a Zone Alarm issue.
-
i need help asap because i keep getting kicked off of facebook and twitter because of the update in the software.
On the computer go to iTunes>Preferences>Devices and select the backup and click on delete.
For more information see:
iOS: Troubleshooting backup issues in iTunes -
Creating pdf files from word document and allow copying of content
I generate word documents and then save them in PDF format before sending out to clients. Sometimes these documents contain quite a lot of data in table format and I want my clients to be able to copy the data from the tables and be able to paste it into excel. How do I save as PDF and still allow copying of content?
ThanksOpen such a PDF in Adobe Reader: File | Properties | tab Security. It will tell you if copying is allowed or not.
I don't know if you can change these security options from Word; you'll have to ask Microsoft. To change them after the PDF was created, you will need Acrobat. -
I am not at all smart when it comes iMac App's.
Having upgraded to 10.7 Lion, find that I cannot open any word documents , nor can I gain access to my Entourage email folders. I am now left feeling thatthis is really not my era.
I am an old guy attempting to keep up the young guy's technology and no longer have idea what I am doing.
I have managed to start anew with Mail.
But have no idea how to find or proceed without the now unsupported Microsoft Word application.
Where can I find a replacement for Word, and how may I ever be able to get into my old Word Documents?
Since upgrading from Snow leopard I find that I am unable to get my Seagate hard drive selected as a location for Time Machine back-upswhen running through System Preferences.
Any help on these issues would be greatly appreciated
Please excuse any lack of ettiquitte in this submission, I am new to this culture.Thanks Barney, I am now using pages to open exisiting Word documents. and then saving in the new format. I then trash the old incompatable (.doc) file.
This works OK, but it will be a time consuming operation to be repearted on each file that I use.
Is there any shortcut to enable sync all of the .doc files to Page?
I have not managed to recover Entourage email files . But now use Mail application, which is fine.
Encountered problems are ongoing.
I have an Epson Epson Stylus Photo Rx430 printer.
Since upgrading to OSX10.7 print files do not load to the printer. The Epson job box shows data is being sent to printer but it the task is never completed.
I take this to be a Printer Driver issue.
Today, I have been in contact with Epson Printer support, enquiring if they have any driver updates for RX430 that would be compatable with OSX10.7 Lion.
I was notified by Epson that they do not have any drivers for any of their printers for the new OSX 10.7.
How may I continue using my now unsupported Epson printer? -
Hello,
I was wondering if anyone can tell me how to fix my iTunes. When I tried to update to the latest version (1114) a window popped up saying R6034 C runtime library incorrectly installed. Then another window popped up saying that iTunes was installed incorrectly Error 7 (windows error 1114). Hope you can help.Solved the issue without using the trash . I tried to consolidate the library in LACIE, then clicked on any exclamation-mark song and tried to locate the file. Repeating those steps 3 or 4 times cleared it up. That was confirmed when I synced the entire library on a iPod Classic, and showed up no problems after syncing the Nano.
What went wrong was perhaps to fail to consolidate the library at first . -
I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?
I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%% -
When I try to attach a pdf file to an e-mail it opens and is pasted into the e-mail. How do I attach it as a file?
It is an attachment, it is the way Apple Mail program displays it. When you add the attachment by either using the attach clip or drag and drop, have your cursor were you want the file to be, i.e. under text you have already written.
You can test for yourself that they are still attachments, log into the web account of your email if it as one and send an email to yourself from Apple mail with an attachment and on the web account it will show as an attachment.
Maybe you are looking for
-
Flash player does not work in safari
I need to install updated Flash player when I click on the 'install' button for Flash player - nothing happens. I have tried to 'uninstall' and again nothing happens. Running 10.7.4 and have Safari plug-ins enabled. Can anyone help? thanks
-
"Mode not supported", when try to connect to TV
When I try to connect my Lenovo T440s to my TV using VGA cable, I get a "Mode not supported" message on the television screen and the laptop screen goes black. Some points that may make it easier to troubleshoot: 1. I was able to connect to this la
-
Stretch(Zoom) in iTunes
I've loaded iTunes U video clip and play in itunes ,but I didn't see a zoom button to stretch that video on my macBook Pro. It's only appear on Quicktime player . I don't need a black bar on the left or right screen . for 4:3 clips. How to solve th
-
Upgrade from OSX 10.4.11 to Snow Leopard/OS X Lion
I know my operating system is really behind. Now that OSX lion is out I am very behind in terms of my operating system. Do I need to buy snow leopard first and then lion. If so can I just buy the leopard upgrade or do I need to buy the box set also
-
Turning off sleep mode during high CPU usage
There isn't option to prevent going to sleep mode during high CPU or network usage. This is not professional for serious work like 3D rendering, video montage, downloading or sending large files. Windows is going to sleep during performing serious ta