When I try to open itunes I get the following message MSCVR80.dll is missing. It twells me to reinstall the software. When I try to reinstall the install hangs up and tells me there is an error and I need to reinstall.
My Itunes will not open due to a missing file, MSCVR80.dll. It tells me to reinstall the software. I downloaded the installer for my windows 7 system. When I try to install it tells me there is an error in the install and to reinstall.
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99353)
Similar Messages
-
When I try to open iTunes I get this message " This copy of iTunes is corrupted or is not correctly installed. Please reinstall iTunes." I have installed the latest version of iTunes and the message has not changed. What should i do next?
Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now? -
Evertime I try to open Itines I get an error message for a " runtime error " from Microsoft Visual C ++ Runtime Library --- Help Please
I actually solved the issue myself. In my prior attempts, I was only un-installing iTunes from the Control Panel. This time I un-installed everything Apple: ITunes, QuickTime, and any software application that was from Apple.
Once I removed all of the Apple software and re-downloaded iTunes, everything worked perfectly. -
I had a new hard drive fitted to my imac and restored it from my time machine back up on an external hard drive when I try to open itunes I get this message "the itunes library extras.itdb file is locked, on a locked disk, or you do not have write permission for this file"
To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!
-
I installed itunes and quick time but when I try to open itunes I get a message that reads "quicktime failed to initialize (error -2096). I have removed both itunes and quicktime from my computer and re-installed them and I still get the same message. What do I do to get itunes to work?
That one is often a compatibility mode problem. Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
when i try to open itunes i get the message insert a disk into removable disk f and when i look for disk f there is no f on my computer. I thought i might make a disk f that letter is not available in my device manager section. So i try and uninstall/install itunes it was error message wd is invailid character. I am in a pickle here.
To solve this issue all I did was check to ensure that the file permissions were set as described by the earlier posts, followed by simply deleting the iTunes Library Genius.itdb file. Once the file was deleted I was able to open iTunes without difficulty. Note that I am running Windows 8. Hope this helps!
-
I had to restore my computer and had to reinstall itunes. Now when I try to open itunes I get a message saying it is a new version than my itunes library. How do I fix this?
Try the following document, only be sure that none of the boxes in the compatibility mode tab are checked (not just the compatibility mode box itself):
iTunes for Windows: How to turn off Compatibility Mode -
I recently transfered everything from my emac to another one but now when I try to open iTunes I get the window that states: The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. The computer I transfered to had a bunch of files on it and I got full ownership of what was already there, so, how do I get to my iTunes library, I do have access as an administrator to the iTunes library (that works just fine) already there and I guess I must have had a newer version ofiTunes on my defunt eMac....
Tell us some version numbers please, of your Mac OS versions and iTunes versions on both computers (two eMacs yes?).
dlrobinson49 wrote:
I guess I must have had a newer version ofiTunes on my defunt eMac....
That is a pretty good guess.Try updating the second eMac's iTunes to at least the version that was on the first. -
When I try to open itunes i get a message saying: File "iTunes library.itl" cannot be read because it was created by a newer version of itunes. And itunes will not start up. Any help out there?
Hi did you ever get a solution to this problem? Having the same issue myself!
-
When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.
Any suggestions please?
-
When I try to open Itunes I get this error msg, 'This copy of iTunes is corrupted or is not installed correctly. Please re install iTunes (-42404), I have tried repairing, no joy, uninstalling and re installing, no joy. Any ideas?
<Subject Edited by Host>For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I was today invited to upgrade my iTunes when I logged on. Update failed. Every time I now try to open iTunes I get error messages. Second message reads "iTunes was not installed correctly. Please re-install iTunes. Error 7. Windows error 126". I now can't sync my iPhoneand I am worried that if I re-install I will lose all my contacts,calendar, notes, etc.
I too had this problems (Windows 8.1). A few weeks ago after the previous update before this version of itunes, I'd had a problem with the itunes store crashing and at that time I followed instructions to copy QTMovieWin.dll to the itunes folder, which fixed the store crashing.
Today I fixed the problem by:
Delete QTMovieWin.dll from C:\Program Files (x86)\iTunes.
Uninstall ALL Apple Software using Control Panel / Programs and Features. I uninstalled:
iTunes
QuickTime
Apple Mobile Device Support
Apple Application Support
Apple Software Update
Bonjour
Delete the folders:
C:\Program Files (x86)\iTunes
C:\Program Files (x86)\Common Files\Apple
Restart the computer
Reinstall QuickTime
Reinstall iTunes
Everything works GREAT now, including the iTunes store. You will not lose your media files, I got everything back, all my settings, playlists, etc. -
When I try to open ITUNES I get the following messages: Runtime Error R6034 - "An application has made an attempt to load the C runtime library incorrectly" . I have 15,000 songs in my library. Will I lose them if I uninstall as suggested by Apple??
Exactly the same problem. But it gets worse. iTunes has now disappeared from my list of installed programs so I can't uninstall anyway. Appalling problem. This update clearly didn't get proper testing before release.
In answer to your question about your song library, I seem to remember uninstalling and reinstalling iTunes a few years ago and the uninstall didn't remove the library then - I can't see why it would. Of course there have been a lot of updates since then, so it is definitely worth asking the question. Personally, I would be inclined to make a copy (if you have the space) of the iTunes folder just to be sure.
I certainly hope they get this fixed soon. I use iTunes mainly for podcasts on my iPod and I can't download anything right now. -
When I try to open itunes I get the following message: Itunes error R6034 An application has made an attempt to load runtime library incorrectly. An help greatfully received. I have also attemted to reload itunes to no avail.
Hey Sheribabe,
Thanks for the question. I understand you are experiencing issues when connecting your iPad. Let’s troubleshoot your iTunes installation by completely removing and reinstalling iTunes and all related components:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Thanks,
Matt M. -
every time I try to open itunes I get a message saying "runtime error. An application has made an attempt to load the C runtime library incorrectly. I have already un- and re-installed it, but i get the same message as before. How do i fix this? I don't want to lose my music and would at least want to save that.
Follow the instructions of tt2 given in https://discussions.apple.com/thread/5822086 and note to run as admin
Maybe you are looking for
-
how do i get all my music to transfer from an old pod to a new ipot touch? Shouldn't this be automatic when i login to itunes?
-
DOC should be a normal Word document and we should be able to define the header style
Hi Team, We are facing a issue with the pre assigned headers assigned by Adobe acrobat Pro Xl. Our actual requirement is as follows: 1. As we convert a PDF to DOC there shouldn't be any pre assigned headers (header levels defined). 2. DOC should be a
-
Spawning my own JPopupMenu breaks every single JComboBox in the application
That's pretty much it. I have determined the problem is in no way caused by the contents of the popup menu, but rather the popup menu itself. I have a popup menu which contains only a button which does nothing (I've tried this same thing with just a
-
We are trying to link a PDF document as a resource in our project. Where can we store the PDF document to be pulled into the course. We will most likely be putting our course on our intranet. Also, I have inserted several of our intranet links in my
-
Slideshow with Filmstrip - Strip jumps too many thumbnails
Hi, Thanks for looking at my post and thanks in advance if you can help me. I recently decided I wanted to try using the Slideshow & Filmstrip Widget on my web site to help display my gallery. I feel I have been successful in adjusting the scripts to