When I try to open one web page is coming very late after 45 seconds later even more late why?
I am using firefox since very long time. I have a problem now on opening the selected pages. They are coming very late I mean they are opening very late about 45 up to one minute later the pages are oıpening which are very late. I tried few minutes ago Chrome and I saw that it is working very fast without any problem. What I have to do now ?, Uninstall the firefox and use the chore as web browser or will you find a solution to my broblem?.
Regards
Erol Tahir Erdal
I choose to find a solution. Please check that you don't have any Skype extensions or plugins in Firefox. Skype is known to slow down Firefox 300 times.
Similar Messages
-
when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/ -
Firefix stops responding when I try to open a web page
The Firefox browser page turns white & says not responding when I try to go to a web page. This happens every time I try to go to a web page in a new tab. This only started happening after I did the last Firefox update.
Did you try to perform the solutions mentioned in the following sections ??
-> Firefox did not shut down normally
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding#w_firefox-did-not-shut-down-normally
-> Access rights
* https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding#w_access-rights
Check and tell if its working. -
When I go the drop down from the address window, rather than showing the URL of the website I want open in a second tab it says "Switch to tab." But I don't want to switch to the tab - I want to open a second tab on the same URL. If I want to open it a second time I have to manually key in the address. Is there some way to turn this off so I can open up the second tab using the same address from the drop down? I have always been able to do this with previous versions of Firefox.
'''''"Is there some way to turn this off so I can open up the second tab using the same address from the drop down?"'''''
You can install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/switch-to-tab-no-more/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
Not related to your question, but...
You need to update some plug-ins:
*Plug-in check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox] -
Macbook Pro has good internet connectivity, but when I try to open a web page it will not open
I have good internet connectivity but cannot open any webpages , since I cleared all History. Also System is slow - spinning pinwheel spins forever!
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
When I try to print a web page, all I get is one line across top of page.
When I try to print a web page in Firefox, the only thing that prints is a single line across the very top of the page. I can sometimes highlight and print my selection, but now that has stopped working.
I did not have the HP printer software for Mac OSX installed properly. Once installed the problem went away.
-
n the dialog box that appears when I try to print any web page, there is neither a preview nor a preview button, (although there is a preview if I open the web item as a pdf file, but that takes an extra step. A preview appears when I print any other file on my computer (a Macbook). Is there a setup procedure that will give a preview when printing one or several web pages?
The Print button in the "3-bar" Firefox menu button drop-down list opens the Print Preview window.
You can click the Print button in the Print Preview window or use the Print item in the File menu (File > Print) or use the Ctrl+P shortcut to have access to the print selection item and other print setup options.
* Tap the Alt key or press F10 to show the Menu bar.
* Use "View > Toolbars > [X] Menu Bar" to have the menu bar visible permanently.
*Universal Print: https://addons.mozilla.org/firefox/addon/universal-print/ -
I was sent a .pages doc. When I try to open it with pages I'm told "You need a newer version of Pages to open this document." I have the newest version of pages on my computer. What should I do?
I wonder if you are running an OS earlier than 10.9.x? If so, you cannot run the *latest* version of Pages, which is 5.1. Apple is trying to get you to update your OS to 10.9 Mavericks and then get you to update (but defintiely not upgrade) your Pages version to 5.1. 5.1 is, in everything but name, beta software. It not only has many bugs, it also lacks more than 90 features that are present in version 4.3 ("Pages 09"). One workaround that is to open the file with Pages for icloud (this is explcitly beta) and click tools|download a copy in Word format. Pages 4.3, which is probably the version you have, can open Word documents. Get a cup of coffee or a glass of wine before starting Pages for icloud: it is s-l-o-w.
-
I am a web designer. I have saved pages that I update and upload to websites all the time. Now, after the latest updates, when I try to open these saved pages it only opens Firefox and loads the homepage. The saved page does not open. If I'm to keep using Firefox, which I would prefer, I need this functionality back.
''jscher2000 [[#answer-670981|said]]''
<blockquote>
What do you have set up as the default application for .html files? Or are you opening another kind of file that isn't normally/automatically associated with Firefox?
If you drag and drop the file onto a tab (which normally would replace the page there with the local file), what happens?
</blockquote>
I had tried all the suggestions. None of they helped. I can open the files by browsing for they after Firefox is open. I was able to spend some more time troubleshooting the issue yesterday afternoon. The issue has to do with the 64-bit file system. When I right click and select open with and then point it to the installation folder in the Program Files (x86) folder, it still won't open the file just opens to my home page. I did notice that when I was browsing for Firefox.exe that it defaulted to the Program Files folder not the Program Files (x86) folder. So I renamed the exe to LittleFox.exe and browsed for that exe and Firefox would then open the files as expected. So my guess is that it is a registry setting that is all the headache. I don't have time to run that problem down but will just use my workaround by renaming a copy of the exe and use that with my file association.
Thanks -
Why does google start up but when i try to access a web page it shuts off
why does google start up but when i try to access a web page it shuts off
Not entirely sure what you mean, but if you are saying that the Safari screen is frozen/inactive then try clearing its cache : Settings > Safari > Clear Cookies And Data (Clear Cache on iOS 4) and also Clear History
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
When I try to print from web page I get a dialogue box "Printer not activated - error code 30" followed by a dialogue box "An unknown error occurred while printing". The printer works on websites when I use Internet Explorer. Also, if I copy the web page and paste it into a Word document, I can print a copy. This issue just started this week; I have not encountered this problem prior to this week. Please advise.
What does that error message say?
See this: http://kb.mozillazine.org/Problems_printing_web_pages -
When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?
When I try to access any web page or any link from a web page, I receive an error message such as "Server not found" or "Unable to connect." After repeated "try again" attempts that the page will load, but as soon as I click on a button or link, the same thing repeats. Any suggestions?
-
So, I made the mistake of updating Garageband 09 to GB 11 without exporting my songs first. When i try to open one of them it freezes up and won't respond then the program crashes.... any ideas?
stopmotion wrote:
That's what I figured from what I've been reading. Will have to see what the cost might be and if it's a worthwhile investment considering the age of the computer.
You can get a first-gen Mac Pro on eBay for around $300. It can run OS 10.4 through 10.7. Something to consider, depending on the cost of a logic board and the hassle of replacing it. You transfer your existing drives, as long as you have a spare external drive. You would clone your G5 drives to the external drive as disk images, then move the G5 drives to the Mac Pro, re-format them GUID, and clone back the contents from the disk images on the external. I did this recently when I retired my G5. -
WHEN I TRY TO ACCESS A WEB PAGE MY I POD TOUCH RETURNS TO THE DESKTOP SCREEN
WHEN I TRY TO ACCESS A WEB PAGE MY I POD TOUCH RETURNS TO THE DESKTOP SCREEN
Try a hard reset of your iPod. To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
B-rock -
When i try to open week cal it loads and then closes after a few seconds...I have checked for updates, turned the phone off then on, closed out of the app and then opened it again...nothing works! I have thought about deleting the app from my phone and then reloading it again but I worry that it will delete all my calendar info??? Any suggestions?
To reset, press and hold the Home and power buttons until the silver apple appears.
I would delete the app, reset the phone and then download the app again. Your calendar information should be stored on the phone as Week Cal uses the Calendar app information.
Best of luck.
Maybe you are looking for
-
Idoc multi mappings in a single interface
Hello Folks I have to send three different types of Idocs (MATMAS, CLFMAS, BOMMAT) from R/3 to XI. The sender application sends only one file and I need to map the data relevant to each of these Idocs and post in R/3 separately in a defined sequence.
-
Cannot get my 30G classic to sync to my windows laptop. Suggestions?
Bought a used 30g IPOD classic on e-bay (I know, what could go wrong?). Attempts to edit the 5000+ songs left me with the 40 songs I wanted and over 5000 "footprints" or titles of songs where there's no music. You go to play the thing and it has to t
-
Hai Im planning to study Web Reporting .. How can i start and from where can i start . What are prerequisties for my own system .. What are setting , i need to study web reporting .. Please guide me Thanks rizwan
-
I have to display a tree with Table names and columns. Both table and column nodes have different icons. In addition there are minus(-) symbol for expansion of tree nodes. All the tables nodes needs to be at root level but as we can have only one roo
-
List VM Images not listing my images
HI I am using the virtual machine api on https://msdn.microsoft.com/en-us/library/azure/dn499770.aspx to get a list of all available vm images, but when I call this I am not getting the VM images that I have created and are available on the portal,