When i try to open Photoshop 7.0 I get a message "the search discs are full" and it will not open. Help?
When I open Photoshop 7.0 I get the message "the search discs are full" and it will not open. Help?
Is your scratch drive over 1 Terabyte? Photoshop 7 was never programmed for those sizes and will return that type of error if you recently changed drives,
Solution is to partition that drive to less than one 1 TB or find a smaller drive.
And update to 7.0.1 Adobe - Photoshop : For Windows : Adobe Photoshop 7.0.1 update
Gene
Similar Messages
-
When I try to install Time Machine update I get this message: “You cannot install Time Machine and AirPort Updates on this volume. This update requires Mac OS X 10.5.2 or newer.” I have OS X 10.5.8.
It's bundled with 10.5.3 and newer and can't be installed separately on those OSes.
(59310) -
When I try to email photos from iPhoto I get this message: The email server didn’t recognize your username/password combination. It won't let me change it, what do I do?
Can you send email ok via the Apple Mail application?
The username and password are set in the Accounts section of the Mail application. Start Mail, select preferences and select Accounts. Then make absolutely sure that the username, password and outgoing mail server are entered correctly. -
I have been following the download instructions. But I never get a prompt to place the file into the Applications folder. So I open the file, drag it to Applications, and get a message that I already have a newer file in Applications. However, this is not true. When I drag the file to the Firefox icon, I am told that can't be done because Firefox is already open.
I have done several other updates, never had this problem before. I have a MacBook.Beginning with Firefox 4, Macs must have an Intel x86 processor; your system is a PPC Mac.
*System Requirements: [https://www.mozilla.org/en-US/firefox/4.0/system-requirements/index.html Firefox 4] [https://www.mozilla.org/en-US/firefox/5.0/system-requirements/index.html Firefox 5] [https://www.mozilla.org/en-US/firefox/6.0/system-requirements/index.html Firefox 6] [https://www.mozilla.org/en-US/firefox/7.0/system-requirements/index.html Firefox 7] [https://www.mozilla.org/en-US/firefox/8.0/system-requirements/index.html Firefox 8]
The good news is that Firefox 3.6.24 still supports the PPC Mac architecture. The bad news is that support for the Firefox 3.6.x series is likely to end in the first quarter of 2012.
*System requirements: [https://www.mozilla.org/en-US/firefox/3.6/system-requirements/index.html Firefox 3.6.x]
*Download Firefox 3.6.24: https://www.mozilla.org/en-US/firefox/all-older.html
You can try the third-party product '''''TenFourFox''''' that supports PPC Macs. Firefox 8 version of '''''TenFourFox''''' is available. The product is based on Firefox released versions. All support is provided by the developer, not by this site:
*Home page: http://www.floodgap.com/software/tenfourfox/
*Developer's blog: http://tenfourfox.blogspot.com/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.''' -
* I work on windows XP
I have latest fire fox and silver light plugin
* "silver light plugin has crashed" is what i get when i try to attach files in hotmail
* error report indicates about plugin-container.exe.
* where to find plugin-container.exe. to install and tryHi,
Please also try to '''Disable''' the Silverlight add-on in '''Tools '''('''Alt '''+ '''T''') > '''Add-on''' > '''Plugins''' before opening Hotmail. You may still be able to attach files. -
My new Hewlett Packard printer is listed as an AirPrinter on the Apple website, but when I try to print from my iPad it says that there are No airprinters. The printer is connected to the same WiFi network, is turned on & I'm close to the printer. Do I need to forma/set up the iPad or Printer to enable this feature?!
It would help to post this in a more proper form. This is for the iTunes family of stores.
-
When I try to download Firefox for Android on my Epic 4G I get a message saying the item could not be found.
An update to quote mbrubeck:
Firefox will not appear in the Market for most phones with incompatible hardware. You can check if your phone is supported here:
https://wiki.mozilla.org/Mobile/Platforms/Android
Even on some supported devices, a bug in the Market software prevents Firefox from showing up. This may be related to the fairly recent Android Market app update. If you go to Settings/Applications/Market and choose "Uninstall" you can uninstall the update, and then search for and install Firefox from the marketplace.
Or, if you have a supported phone, you can download the app directly by typing this address into your phone's browser: http://bit.ly/fxbeta3
(Note: To download the app directly for an AT&T phone, you will have to search for instructions on "sideloading" the APK file, since AT&T disables the option to install from non-Market sources.) -
When I try to install upgrades for itunes on my Mac, I get the following message: The following install step failed: run preupgrade script for AppleMobileDevice Support. When this happened before I trashed itunes and started over, but I don't want to have to do that everytime i install an upgrade.
C,
I ran into the same issue. Make sure your apple device in disconnected from the computer. It interrupts the itunes download. Disconnect and make sure itunes is closed, then try installing again. Remember that even though you close of itunes, it is often still running in the background. To make sure it's closed, click and hold the mouse on the itunes icon and select quit from the drop down menu. Then try installing the updated itunes.
Hope that helps.
SoEreal -
I am having troubles, when I open LR I get a message that there is an error and it will try to fix the error next time it opens. LR closes on it's own, I reopen it and get that same message next time it opens, and this is going on and on where I can not use LR, any suggestions? If I click on a different set of photos in the libary before I get that message I might or might not get the message next time it oipens, but I still can not get to those photos, and it is not just one or two but most of my photos. HELP!!!!
Thanks
CarolThe first thing I would suggest is for you to go to the folder containing your catalog, using your system browser. There will be a folder that has the extension .lrdata. Delete that folder, and then try to start Lightroom. If that doesn't work, replace your catalog with your most recent backup.
-
when i try to instal itunes on pc i get this message. This installation pack could not be opened. Verify that package exists and that you can access it or contact application vendor to verify that this is a valid windows installation pack. PLEASE HELP
Hello annesmith1954,
Thank you for using Apple Support Communities.
You can use the information in the following article to troubleshoot your installation issues with installing iTunes on your PC.
"Could not open key" message when installing iTunes or Apple components for Windows
Regards,
Jeff D. -
When I try to open Help in Vector Works 12.5.5, nothing happens. It works fine when I switch to Safari as my browser. I'm running on a 10.5.8 Mac using Firefox 3.6.3. It worked fine last week. Any ideas?
== This happened ==
Every time Firefox opened
== todayWow! You're amazing! It's now ok! Thanks so much!
I just thought that Rapport will help me to be more secured but I didn't know that it has a side effect. haha! -
I have Aperture3 and iPhoto. When I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why? Others couldn't open them so I sent them to myself and get the same message. Doesn't seem to be a size issue as I've tried with really short clips (4 seconds). As I recall, I didn't have this problem before buying Aperture last fall, when I only had iPhoto. It appears that by default, an attachment to an email automatically comes from my iPhoto files and not Aperture - assume that is supposed to happen but not sure. Thanks for any and all help!
JimWhen I try send video clips as attachments, I get a message saying Quicktime can't open the .avi - why?
How are you tryin to send the .AVI file? Are you sending the attachment directly from Mail or from Aperture or iPhoto? -
When I try to reinstall Photoshop Element 13, I get the message "cannot write file". i own the program and I don't want to subscribe to Creative Cloud. What can I do?
This has nothing to do with CC or any of that. You have insufficient user privileges to write files locally on your computer or a technical issue gets in teh way. Since you have not provided any system info or otehr details, we cannot tell you more than that.
Mylenium -
when i try to redeem my itunes cards, i get a message that says my session has timed out--i installed the latest version of itunes and tried again--no luck--what else can i do?
The new iTunes has a somewhat different look from the previous version. You can get the old look back if you prefer it by doing View > Show Sidebar in iTunes. Or you can adapt to the new look.
-
When I try to export from iMovie '11 I get repeated messages that the project is too big. Why? Is there a workaround? (I have already cut a 40-minute movie into three chunks... the first exported to iDVD ok, but the next one of 15 minutes balked for the same reason -- too long...)
I wish I had a mac :-P
Sadly, this is Windows machine so I dont have a non-iOS version of iMovie. I have 2 ideas left. The first is xfering the project to my iPhone 4 and trying to export it there (if that works, awesome but geez apple the iPad 2 is way more powerful than the iphone 4.. youd think I wouldnt even have to attempt this). The 2nd idea is to start at the end of my movie and delete clips and sounds backwards, trying to export each time to find whatever clip is causing the issue (when the movie was 5 minutes it mixed no probem, so I only need to go that far).
Wish me luck?
Also, is anyone else besides me and the 5 dudes in the other threads having this issue?? Speak up, guys - Apple cant a fix a problem they dont know about.
Maybe you are looking for
-
IPod Touch is not showing up in My Computer
I realize that there are several other topics that talk about this problem, but so far none have really helped me. My goal is to have my iPod Touch be recognized as a camera so I can upload all my photos from my Saved Photos to my computer and finall
-
After upgrade to 4.1 connection to radio doesn't work
My car radio has a usb connection to my Iphone 4 and it allows for charging and audio to play through the USB cable. After my upgrade to iOS 4.1, the audio no longer works properly. It will play sound for 5 to 10 seconds and then it will stop for abo
-
How do you make the 'places' function work in iphoto
`i have just imported a lot of old photos from my 2007 macbook onto a new macbook pro with ilife 09. `i am trying to make the places function work but can't get it to work. The 'i' icon does not appear in the bottom right hand corner of the events ma
-
PROBLEM IN LOADING XML SECOND TIME
HI, Actually i m loading xml 1st time when the page is loading,then again 2nd time when i m trying to load 2nd xml based on dropdown value then it is loading xml but it is appending the 2nd xml with the 1st xml.i m also unloading xml at first then lo
-
RMI Codebase Passing Arguments
I'm new to RMI and Java.How do you pass arguments using serialization in RMI? I'll be passing the arguments from a servlet. for example if i want to pass a string object from a servlet to the calling client service. Thanks