When I try to post STO between two plants, error M7048 is received

Could you check note 520411 - FAQ: Stock transfer-- Q1:
Hope this helps you.

Similar Messages

HOW TO DO BILLING IN STO BETWEEN TWO COMPANY CODES?

Hi All,
I have done sto between two plants of two different company codes.
PO generated(ME21N)
delivery in background(VL10B)
PICK N PGI(VL02N)
Stock Posting (MIGO)
All the steps completed and stock overview is also reflected the transfer.
Now Can any body clarify me about do a billing document should be raised between two plants?
what is process to track accounts in each company code abt stock transfer?
Thanks in advance.
Please clarify with steps to do after MIGO.
Regards,
reddyy

Hi Reddy
The intercompany there are 2 processes
Intercompany STO means there is a stock transfer happens between two plants of different company codes
For that del type used is NLCC order type is NB
Not del type NL as written by you
After the STO the suppying company will bill the ordering company that is intercompany billing
I beleive this is what the process you are trying as per the heading of your thread
Another is intercompany sales followed by intercompany billing and this is what Mr.Murali had sent settings
For this no STO is reqd
The supplying plant will deliver directly to the customer who lies in the sales set up of ordering plant
NO STO here
After the supply is over the ordering company will bill the customer F2 inv and the supplying plant will bill the ordering plant/company
The billing will be between company code to company code that is intercompany
Scenario 1 is Intercompany STO followed by intercompany billing
Whatever we move from 1 plant to another is stock transfer
Scenario 2 is Intercompanysales followed by intercompany billing
Whatever we supply to the end customer is is sales
By going tro the initial thread once again you are trying Intercompany STO only
The del type you are using is wrong and it should be NLCC
_I think you are mixed between both as per my knowledge you cant map this as that and that as this
They both are process wise different_
Pls tell exactly where you are struck?
Regards
Raja

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

I have iPhoto 11 with Lion and when I try to post photos into MobileMe in Share I get the message that iPhoto is not connected to internet. Can anyone tell me how to connect iPhoto to internet?

My solution, which is not much, is to restart iPhoto and it then connects to the Internet. This has been an ongoing unsolved problem.

When Im On Facebook, In Frontierville, I Can Post One Thing But Then When I Try To Post A Second Thing , Firefox Crashes. Its Been Happening For 2 Weeks Now Its Quite Annoying

I Can Post One Thing But It Crashes When I TRY To Post A Second Thin.

@sanjampet: I have already read the link you provided and none of the solutions work, which is why I posted here.
Safe mode just doesn't activate. I hold shift for as long as possible until eventually I get the prohibited symbol. When I hold shift I see the apple logo and loading icon and then eventually prohibited symbol, its as if I wasn't holding shift at all, which makes me wonder if the shortcut is even correct? And I know its not a problem with my keyboard or my timing of pushing shift because holding alt/option works as usual.
Holding C to load from the installs disc doesn't work either, which eliminates all the solutions based on that. Its the same as safe mode - I hold the button until I eventually get prohibited symbol.
I also tried selecting my Mac hd via holding alt key - same result: prohibited symbol.
I also tried selecting my installs disc via holding alt key and a strange thing happens: I see the apple logo and loading wheel but this time it is stuck on the apple logo and loading spin thing for about 20 minutes while there is lots of noise and activity coming from the CD drive..
I also tried resetting the NVRAM/PRAM, which DID seem to have an affect (screen was brighter + startup sound was louder) but I still see the prohibited symbol like all the other times.
I'm yet to be able to get past the prohibited symbol, the only way around it so far is to load the windows partition if my HD.

When I try to post a comment on an article I just read, my post stays in the box w/out posting. And when I want to click thumbs up or down in the comment section in these articles, the number stays the same. Also, my Skype has stopped functioning.

When I try to post a comment on an article I just read, my post stays in the box w/out posting. And when I want to click thumbs up or down in the comment section in these articles, the number stays the same. Also, my Skype has stopped functioning.

Glad you seem to have sorted things out.
The warning about the warranty is light hearted, I think at one stage it warned "here be dragons" but also intended to make us think as it warns that making changes may produce problems.

I get this error sometimes when I try to post a photo to Twitter: "The Tweet "Blah, blah, blah." cannot be sent because the connection to Twitter failed"

Hello, everyone
I've been having a very hard time trying to fix this issue; I get this error 'sometimes', when I try to post a photo to Twitter: "The Tweet cannot be sent because the connection to Twitter failed".
Here's a photo:
How to I fix this?
Please help, Thank you!

Never-mind. I found out what's causing this issue. On Twitter's website support page, I found this: https://support.twitter.com/articles/20156423-posting-photos-on-twitter it gives info about posting photos on Twitter; well, it says: "photos must be 5 MB or lower, and GIF's must be 6 MB or lower".
Please share this info to all Mac, or iDevice users who are having this issue. Thank you!

How to post messages between two threads other than GUI main thread?

Does anyone have examples of post messages between two threads (other than GUI main thread)? Would you please post the link?
Thank you,

Hello, you can call PostDeferredCallToThread passing the your data in callbackData parameter.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

When I try to post a comment the page greys out but nothing else happens, and the comment is never posted.

When I try to post a comment the page greys out. Clicking again restores the page, but the comment is unposted. Repeated clicking "Post comment" just repeats the greying out and restoring. I'm using 14.0.1 on win7 (64).

Is this on one particular site? When you have a problem with one particular site, a good "first thing to try" is clearing your Firefox cache and deleting your saved cookies for the site.
1. Clear Firefox's Cache
orange Firefox button ''or'' Tools menu > Options > Advanced
On the Network mini-tab > Offline Storage : "Clear Now"
2. If needed, delete the site's cookies here (if you usually stay logged in to the site, this probably will log you out)
While viewing a page on the site, right-click and choose View Page Info > Security > "View Cookies"
Then try reloading the page.
If that doesn't help, perhaps something in Firefox 14 or one of your add-ons is not compatible with the site. Do you want to post the URL?

Billing in Stock Transfer between two plants of two different company codes

Hi Friends,
I am doing the scenario of stock transfer between two plants of different company codes.
I have some issues in Billing for this..
What are the settings do i need to to for Pricing in SD point of view.
Ex:
Supplying         /         Receiving
Com.Code:2000     /        CompanyCode:1000
Plant:2100              /         Plant:1100
SA:2000/10/00      /          SA:1000/10/00
I created Customer 5555 w.r.t sales area of supplying company code (2000/10/00)
I created Vendor 7777 and assigned Supplying Plant 2100 in add purchasing data.
In IMG Settings:
Define Shipping Data for Plants: In Receving Plant i assigned customer 5555 and sales area blank
                                                    In Supplying Plant i assigned customer blank and sales area as 2000/10/00
Create Checking Rule: Standard(B SD Delivery)
Define Checking Rule: Standard(Avallability-01assigned to checking rule B)
Assign Delivery Type and Checking rule: Document type(NB)-Supplying Plant(2100)-Delivery Type(NLCC)-Checking Rule-(B)
Assign Doc Type:Supplying Plant(2100)-Receving Plant(1100)-Doc type(NB)
What are Pricing settings in SD i have to do?????????
Process:
ME21N->VL10B->VL02N(PGI)->VF01(IV)->MIGO->MIRO
I have gone through many threads in Forum but confusion in Pricing Part..
Some are mixing with the inter company sales proces..
Pls guide me..
With Regards

Do the following steps for STO Customizing:-
1. Create a customer master record for the issuing plant.
2. Create a vendor master record for the issuing plant, and enter customer account number in the Customer field on the Control screen.
3. Repeat steps 1 and 2 for the receiving plant.
4. Assign the plants to the customer master record in Customizing for Materials Management (MM), by choosing Purchasing <Purchase Order < Set Up Stock Transport Order< Plants.
The Process Flow would be as follows :-
Create a stock transport order, following the standard procedure, and send the order to the issuing plant.
Issuing plant has processes your order, and when it is ready to ship,the storeperson at the issuing plant issues the goods using a transfer posting. The excise clerk there creates an excise invoice.The excise supervisor verifies and posts the excise invoice.It then sends the goods to you, together with the excise invoice.
Once the goods arrive, you follow the standard procedure for incoming excise invoices:
The excise clerk captures the excise invoice, using the stock transport order as the reference document. The storeperson enters the goods receipt, again using the stock transport order as the reference document.Alternatively, you can first enter the goods receipt and then capture the excise invoice.
The excise supervisor then posts the excise invoice.
Best Regards,
Ankur

Stock Transfer Between two plants within same company code

Hello,
We are using scenario-'Stock transfer between two plants within same company code. Scenaro is like Plant A is receving plant and Plant B is delivering Plant.
Plant A release PO for 100 nos to Plant B
Plant B issues 100 nos (via delivery) to Plant A
But Plant A receives only 50 nos physically so they do Goods receipt for 50 nos , but document got generated for 100 nos (when plant B issues material).
Now Plant A do not want to receive remaining 50 nos physically, but wants to reduce material document which got created when goods issue posted by plant B
Now stock in transis (mb5t) is 50 nos.
How to reduce this material document. or any another alternative solution for this?
Thanks,
Shailesh

Hi There
Reversal of partial is not possible ,
But you can use the Mov Type 557 and 558 to do the adjustments in Stock in transit qty
Few more details on STO adjustments
Hi There
it can be settle in many ways,,,
1. Receive the goods as 100 and Scrap the 50 nos from the received plant,,- If the receiving plant is responsible
2.Revert the PGI/Transfer movement(Vl09) and send the 50 nos again from the supplying plant- of the Supplying plant is responsible,
3.Also we have the movement type 557 and 558 without doing the above two steps you can correct the qty from stock in transit itself,,
4. also you can check the below similar thread
STO - material lost during tranfer from plant A to plant B
5. If above are not ok, then receive the goods as 100, And raise the STO as your plant as supplying plant and receiving plant is (Supplied 50 nos less) plant,, Do the process without sending the material.. in this way that 50 nos can be adjusted,,
6.Here is some more details
557 Issue from stock in transit (adjustment posting)
Only use this movement type (also the reversal movement type) under the following circumstances:
Using movement type 557, you can correct purchase-order-independent stock in transit if
- a good receipt cannot be posted to a purchase order without stock in transit, even though there is still stock in transit according to the purchase order history
- stock in transit still exists, even though there are no open stock transfer orders for the particular material
This movement type may ONLY be used in the cases mentioned above after careful analysis, to correct stock in transit that has rounding errors.
This movement type may not be copied.
Note!
Before using this movement type, note the following:
- 392205 Analysis stock in transit / Correction if split valuation
Possible special stock indicators:
E, Q
7. As previous post says if you have the note for this issue you can use that also
You can use any one of the way to solve the issue, Hope it helps
Cheers
Senthil P

HT1349 itunes will not open on my computer, and says I need to reinstall it. When I try to reinstall itunes I get an error message error #2502 and error #2503

When I try to open itunes I get a message that says that itunes is corupt and I needto reinstall it. When I try to reinstall itunes Iget two error messages; error #2502 and error #2503. How can I get itunes to work?

Many thanks.
Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. Head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (Although the procedure is for Vista and 7 and you've got XP, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Automatic creation of transportation lane between two Plants or location

Hi,
I am aware that when we cif Inforecords from R/3 to APO new transportation lanes automatically gets created between the Plant and Vendor.
The isssue which i am facing is that i want transportation lanes to be created between two plants . The TL should be created automatically. I could find the below details from sap help.
http://help.sap.com/saphelp_scm41/helpdata/EN/3e/dfaf376ed96c21e10000009b38f8cf/frameset.htm
Transportation Lanes with Reference to R/3 Material Master Record
Storing a special procurement type with procurement type F: External Procurement and special procurement U: Stock Transfer (in the MRP 2 view of the R/3 material master record), means that the material has to be procured externally from another plant (supplying plant) or transferred from another plant.
To also be able to perform stock transfers for this material in the SAP APO system, there has to be a transportation lane from the supplying plant to the receiving plant. If you have transferred a material with this special procurement type from the SAP R/3 system, the SAP APO system automatically creates a corresponding transportation lane from the supplying plant to the receiving plant for the supplying plant (from the special procurement type) and material/plant combination. The transportation lane is given the creation indicator u201CSu201D for special procurement.
I am not able to make sense of special procurement U: Stock Transfer (in the MRP 2 view of the R/3 material master record),
Is this Special procurement some sort of customization as i could not find U: Stock Transfer in my implementation.
Please help me understand this. What exactly should i do to create TL between Plants automaticcaly through Cif.

You need to define setting in IMG for this from source to Target location.
Follow this path :
Production->Material Requirements ->Master Data->Define Special Procurement Type
example :
Plant      1004
SP type    40   Stock transfer (proc.from alter.plant)
Procurement type     F    External procurement
Special procurement U    Stock transfer
Plant                1039
Manish

I can't upload Iphone 5 video or send it in an email. It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

It will play in iTunes but just gives a black screen when I try o email. I get an error message when I try to upload. Any Ideas?? I've already reinstalled OS X

Not sure if this Term is Relevant towards an iPhone but, my iPhone won't Post unless if it's plugged into a Charger.

I just tried updating to iTunes 10.7 on my pc and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Any Ideas?

I just tried updating to iTunes 10.7 and when I try to launch it I get this error message-The procedure entry point AVCFPlayerSetDirect3DDevice could not be located in the dynamic library AVFoundationCF.dll. Them it tells me to re-install iTunes and the same thing happens again. Any Ideas?

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

When I try to post STO between two plants, error M7048 is received

Similar Messages

Maybe you are looking for