When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto.  All other print requests show the normal pinter menu. How do get the normal menu?

When I try to print an address from Address Book on an envelope, the printer menu shows the menu from IPhoto.  All other print requests show the normal pinter menu. How do get the normal print menu?

Mike,
Are any of your other applications going wonky, or is it just Logic?
I'm afraid I've never heard of this particular problem before, but if it were happening to me the first thing I would do is delete my "com.apple.logic.express.plist" file in Library>Preferences, then repair permissions in Disc Utility, and finally restart my computer.  Then I would launch Logic and see if the problem has been corrected.  It's amazing how much these two steps can accomplish.
If that doesn't resolve the issue I would launch Logic and go to Preferences>Audio Units Manager to see if all my plug-ins are properly validated.

Similar Messages

  • When I try to update my iPod touch, a message saying there isn't enough space on my computer appears and all media on my iPod will be lost, should I proceed with the update?

    When I try to update my iPod touch, a message saying there isn't enough space on my computer appears and all media on my iPod will be lost, should I proceed with the update?
    My iTunes Library is on my computer, I have done a backup manually, and all of my music is on an external hard drive (as well as my iTunes library).

    Thanks a lot Recycle bin is empty, I will move some files from the C drive to an external hard drive, then do the update, and then move the files back. Any files you recommend not moving to the external hard drive at all?

  • Lost library and only a portion was salvaged - how I get the rest?

    I was running Google Earth and iTunes at the same time today and our computer crashed. As a result, we lost our library (we do have it backed onto our iPhone except the album I purchased just before it crashed). I followed the instructions under apple.com/support (users/music/itunes...moving iTunes Music Library.xml on the the desktop, etc. etc.). It only recovered a small portion of our albums. When I go to users/music/itunes, there is a folder that has all our music in it. I tried to bring it in to iTunes and every time I've tried to do that, iTunes crashes. I'm a bit nervous to get the music from our ipod. I disabled the automatic sync on iTunes but when I go to do it manually, it says this phone is recognized by another iTunes application. I hope this all makes sense! Help!

    I told you how to get the music from your ipod.
    Relax, I am trying to help. You can check the inferiority complex. You would be shocked at the number who never backup anything and then are shocked that there is no way to get the music back.
    Not that I feel like helping you further, but try this article ( and try being more polite to those you ask for help):
    http://support.apple.com/kb/HT1553
    "I know it's not a backup"
    "we do have it backed onto our iPhone"

  • How to get the response of a vbscript ran from extended js?

    Hi All,
    I  want to get the result from a vbscript, how to get that in my jsx? This is what I'm doing-
    vbscript (this will return me something, i've added just a sample string)
    Wscript.Echo "Like this?"
    jsx
    var a = File("C:\\Users\\Sahil\\AppData\\Roaming\\CreativeWorx\\1.vbs");
    var b=a.execute();
    Now, variable b returns me true/false; and the output i.e. "Like this?"  is alerted! So my question is-
    1. How to get the output in a variable?
    2. How to avoid the alert
    So, I simply wish to get the output from my vbscript and then perform certain functions accordingly, alos, I dont want  this to be alerted!
    Any help will be highly appreciated!

    The capitalization is app.doScript and not app.doscript that is if you are trying to get a jsx script to run and access a string from from a vbs script.
    When defining the VBscript for multiline scripts the easiest method is to use triple quotes
    VBscript = """dim WMI:  set WMI = GetObject("winmgmts:\\.\root\cimv2")
    dim Nads: set Nads = WMI.ExecQuery("Select * from Win32_NetworkAdapter where physicaladapter=true")
    dim nad
    for each Nad in Nads
        if not isnull(Nad.MACAddress) then Wscript.Echo Nad.description, Nad.MACAddress  
    next"""
    when using the scriptArgs you can either make a loop of them and send the string value of each one something like this
    For (n = 0 .........
    myArg = "myArg" & n
    myStringToPassOver = "Shaddow Fax " & n
    app.scriptArgs.SetValue myArg, myStringToPassOver
    Next
    or probably better to make a long comma or something else separated string and pass it over after the loop
    var VBScript = """myArg = ""
    For n = 0 To 15
    myArg = myArg & "Shaddow Fax " & n & ","
    Next
    app.scriptArgs.SetValue "myResult", myArg
    app.doScript(VBScript, ScriptLanguage.visualBasic);
    var myResult = app.scriptArgs.getValue("myResult").replace(/\,$/,"").split(",");
    // if neaded use "replace" to remove final "," and "split" to convert into an array
    alert(myResult.join("\r")); // alert the array
    The above script is a jsx script that runs a vbs
    If you want a vbs script to run and access a string from from a jsx script then you would use xxx.DoScript see the sample from the manual below.
    Set myInDesign = CreateObject("InDesign.Application")
    myJavaScript = "alert(""First argument: "" + arguments[0] + ""\rSecond argument: "" +
    arguments[1]);"
    myInDesign.DoScript myJavaScript, idScriptLanguage.idJavascript, Array("Hello from
    DoScript", "Your message here.")
    myVBScript = "msgbox arguments(1), vbOKOnly, ""First argument: "" & arguments(0)"
    myInDesign.DoScript myVBScript, idScriptLanguage.idVisualBasic, Array("Hello from
    DoScript", "Your message here.")
    P.s.Please mark the question as answered, thanks

  • How to get the data from multiple tabes into single table

    hi all,
    here i am having 10 data base tables,how to get the data into a single table.
    regards,
    subba reddy

    hi,
    non XI/PI related
    Regards,
    Michal Krawczyk

  • How to get the number of years, months with two sysdate()

    Hi All,
    Sorry for posted another question regarding the conversion.
    I have the hiring day and current day in date format like : '2005-10-01' and '2006-09-14'
    How to get the differences between current date is ('2006-09-01') and
    hiring date is ('2004-10-01' )
    in the format number of years and number of month without using the Mod
    function . For this example the result is : 2 years 1 month
    Thanks
    JP

    How to get the differences between current date is ('2006-09-01') and
    hiring date is ('2004-10-01' )
    in the format number of years and number of month without using the Mod
    function . For this example the result is : 2 years 1 monthshould not it be 1 year 11 months???
    SQL> select (date '2006-09-01' - date '2004-10-01') year to month diff from dual;
    DIFF
    +01-11

  • How to get the SR NO in a report

    Hi all,
    I am new to report and was wondering how I get the
    SrNO in a report like below example.
    SrNO Name Dept
    1 ABC Sales
    2 xyz Admin
    Should i use CF or CP etc ???
    Regards
    Sunny

    If it is a tabular report, then use rownum in your
    query and display it in the report
    e.g.
    SELECT ROWNUM, EMP.EMPNO, EMP.DEPTNO
    FROM EMP
    If group report, then use a summary column (count) in
    the detail group and reset on master group.
    Hope this helps.Thanks a Million.!!!
    Sunny

  • How to Get the Current Workitem id at runtime

    Hi All,
    I have a scenario, where request pending with a user who has already resigned the organization. The requirement is that we need to provide a report
    of the request and with whom it is pending with along with the workitem id with a forward push button.
    So that if the user identifies that a request is pending with someone he can click the record and press for the forward button and a pop-up to be showed where he can enter the userid to whom he needs to forward it.
    In this scenario can anyone tell me how to get the current workitem id at run time and to save it to a custom table.
    I tried with method before workitem execution, but here i am not getting the current workitem id.
    Can you please suggest a good solution for this.
    Thanks and Regards,
    Balaji

    Karri,
    I think i can explain you with an example.
    Here is my Scenario.
    A user has raised a Gate pass and it went to all approval's and got approved and the material is also sent out from the plant. Lets take the date as 1.1.2013 (A Warehouse person have done the checking and sent out of the plant).
    On 1.3.2013 some of the material has been returned and a material inward request has been raised and now the warehouse person has to do a inward checking and to sent it back for the initiator for the approval, but the warehouse person has resigned the organization on 1.2.2013, now the workitem is pending with the warehouse person who has already resigned.
    My scenario is once the material inward request is created and before the workitem is delivered to the warehouse person i need to get the workitem id and to store the workitem some where.
    So that in future if any warehouse dept head wants to forward the workitem which are lying in the person inbox who has already resigned he can do it via a report using this workitem id.
    So, can anyone help how to get the dialog workitem id before the workitem creation or execution. I tried with "method before workitem execution" but my break point is not triggering at this point.
    Thanks and Regards,
    Balaji

  • How to get the list of top 10 tables grown last week or last few days

    Hi All,
    Please let me know, how to get the list of top 10 tables grown last week or last few days
    Thanks

    Please let me know, how to get the list of top 10 tables grown last week or last few days1.Oracle Version and OS info please ... ALWAYS
    2.Do you have licensing options (Tuning and/or Diagnostics Pack) ?
    3.Have you ran AWR/Statspack in last week or last few days
    1.Because Oracle do not store auto tack the history of tables growth. See below link where one user has showed the possible way of manual track of table(s) growth :
    Re: oracle tables growth
    2.MOS Note for How To Get Table Growth History Information? [ID 1395195.1]
    3.If you are in 10g than EM of 10g has something called Segmnet Statistics which can show you the growth of your table.
    4.Other clue :
    SQL> select * from table (dbms_space.object_growth_trend('SCOTT','EMP','TABLE'));
    TIMEPOINT                                                                   SPACE_USAGE SPACE_ALLOC QUALITY
    17-SEP-12 11.06.20.228000 AM                                                       1593       65536 GOOD5.A good script by Mice Ault for historical growth of segments within AWR:
    http://www.dba-oracle.com/t_table_growth_reports.htm
    Regards
    Girish Sharma

  • How to get the footage's current frame number in expression?

    There are 2 layers.One is text layer,one is sequence layer.
    Footage has begun from the 20th frame.
    Therefore, the number of composition's current frame number and footage's frame number has shifted.
    I want to show footage's frame number in text layer . not composition's frame number.
    How to get the footage's current frame number in expression?
    Tatsuya

    >Footage has begun from the 20th frame.
    Do you mean that the footage layer has been trimmed (so that the start of the footage lines up with the start of the comp, but the first 19 frames are not visible), or moved to the left (so that frame 20 lines up with the comp's frame 0), or that the sequence actually begins with the 20th frame (at frame 0 of the comp), or something else?
    Are the frame rates of the comp and the footage the same?
    Dan

  • How to get the disk size

    Hi, everyone, does anyone know how to get the size of the disk, say hard disk? In the Writing Device Driver it says that the block device driver must create an 'nblocks' property for each minor block device. I want to get the size of the block device in another driver. Is there any DDI/DKI kernel function for this?
    How to get the same thing in a user mode application? Is there any API to do this?
    Thank you very much.

    I just found a function in include/sys/conf.h. The prototype is:
    extern int bdev_size(dev_t);
    Can I use this function to get the disk size of the device dev_t? I couldn't find the documentation of this function.
    Thanks

  • How to get the Swatch Options Color Type?

    How to get the Swatch Options Color Type name that is "Process Color" or "Spot Color" which shown in the Color Type via scripting..
    Thanks...

    Could you please provide any example for how to get the color type name that is process or spot. Thanks for looking into this.
    Advance thanks,
    Maria Prabudass

  • Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server

    Getting error when I try to remove eum secondary email address from the Mailbox from Exchange 2013 server. The command works if you issue directly from the server exchange shell.
    I open the remote power shell to the exchange server 2013.
    Issue the following commands and getting the following error.
    $mailbox = Get-Mailbox -Identity testuser$mailbox.EmailAddresses -= "eum:50004;phone-context=telExt5digits.lync5.com"Then getting the following error:Method invocation failed because [System.Collections.ArrayList] doesn't contain a method named 'op_Subtraction'.
    At line:1 char:27
    + $mailbox.EmailAddresses -= <<<<  "eum:50004;phone-context=telExt5digits.lync5.com"
        + CategoryInfo          : InvalidOperation: (op_Subtraction:String) [], RuntimeException
        + FullyQualifiedErrorId : MethodNotFoundHelp!

    Now for an answer - your remote session doesn't have the same object you have on the server itself.  Notice it says this is an array list, not a ProxyAddressCollection.  If you need to work around this, you'll need to massage the addresses another
    way that the system will accept.  I'd try the following:
    $NewAddresses = $mailboxEmailAddresses | ? { $_ -notlike "eum:50004;phone-context=telExt5digits.lync5.com" }
    See what you get in the $NewAddresses variable when you do this.

  • How to get the PO no in the smart form and in the print program from ME23N

    hello all,
                     I am new to smart form printing.I want to make a smartform along with print program that will show PO Details.It has to be created as an o/p type in ME23N. I have created an o/p type ZPO using NACE ..Can some one tell me how to get the PO number in the smart form and in the print program  from ME23N ,so that I can then program the necessary calculations?plz help me with the code.Thanks in advance.
    Subhabrata.

    Hello Everyone,
    I am new to the forum and also to abap.
    Excuse me if it is a basic question.
    I am taking care of the output types.
    This is 1st time SAP will be implemented .
    For purchase order , I go to NACE ---EF----NEU---Processing routines
    print output---SAPFM06P---ENTRY_NEU----MEDRUCK
    FAX-----------SAPFM06P---ENTRY_NEU----MEDRUCK
    EDI------------RANASTED--EDI_PROCESSING
    DISTRIBUTION(ALE)---RANASTED---ALE_PROCESSING
    Are the above settings fine ?
    What are the standard programs for the PO outputs . I am looking for the smartforms and the driver program .
    I searched and found that IN ECC 6 , we have to install OSS notes .
    Gurus, please help  me . Let me know what all oss notes be implemented and how to proceed from here .
    Any help will be greatly appreciated ,
    Monalisa

  • How to get the contact photos from the address book on the ipod ??

    Hello !
    I figured out that it was available to sync the address book (on Mac OS)with the contact photos and find them on your ipod nano chromatic... But I have Windows and I can't make it work with Outlook. I can sync it with itunes and have the contact names and few infos but not the pictures, there is just a grey silhouette instead of the contact photo. Is there anybody that know how to get the contact picture on the ipod (with Windows OS) ?
    Thanks a lot in advance !
    Hyrekia

    Hooray !! I have found how to do it !! There is a new option now on itunes when you sync your ipod with outlook. You just have to check the box entitled "add the contact pictures". I'm not sure it was there before, but I did an update today !!
    I'm really glad !!
    Hyrekia

Maybe you are looking for