When I try to print from Lightroom the program appears to go into safe mode(light gray) and never opens print options

I am trying to print a photo in Lightroom. I go to the print tab and it appears the program goes into safe mode(light gray) and does not open print options. All other functions of the program are working. I am not getting a memory low warning or other error messages. What would cause this problem?

DO NOT use HP's software for installing the printer, locate the uninstall directions from HP and uninstall ALL the HP software. Then follow the instructions located in Apple's Wireless Printer Install advice letter.

Similar Messages

  • When I export a photo from lightroom, the image is very pixelated.

    When I export a photo from lightroom, the image is very pixelated. This pixelization occurs irrespective of whether I make adjustments in Lightroom.  It seems that just placeing the photo into he develope modual  without doing anything to it taints the image in such a manner that when it is exported from the develope modual the expot comes out pixelated.

    Brett,
    The photo i was a panorama knitted in Photoshop from four photos which were approx 3.3 MB each. The knitted pic came out to be 1.10MB. The panorama pic I was trying to refine in Lightroom and export came out to be 70.9 KB and extremly pixilated. Whether I altered it  in Lightroom  or not didn't matter.
    I can't imagine that bringing up the photo in the Develop modual would result in pixilization when it was exported regardless of whether it was altered or not altered.!!
    Attached is  a copy of the Photoshop saved and Lightroom exported photos before and after. I appreciate your help and interest. The top pic 1.10MB is what was saved on Photoshop. The bottom pic 70.9KB is the unaltered pic exported out of the Develop modual exhiiting the pixelization.

  • When I try to backup my catlaog the program locks up at "Calculating Total Media Size" 33%?

    When I try to backup my catlaog the program locks up during the "Calculating Total Media Size" process at 33%?

    I have seen this before and it is probably a bad video. There is no great solution. To determine if this is the cause I would remove all your videos from PSE and try to do a backup, if the backup works, one of the videos is bad. It is trial and error to determine which video. When you remove your videos from PSE make a note as to where you have put them so you can reload them..

  • New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this?

    New computer win 8.1 pro, installed my creative Suite 4 Design premium but it shuts down when I try to use any of the programs and gives me an error code 147:20. How can I fix this? Is this a conflict with win 8.1 pro?

    You need to adjust your security stuff/ permissions and possibly use compatibility modes. It means that your licensing service is being blocked/ shut down.
    Mylenium

  • Uninstalled Itunes and now I get message 'Thank you for downloading Itunes' when I try to install. But the program doesn't install.  Any ideas?

    Uninstalled Itunes and now I get message 'Thank you for downloading Itunes' when I try to install. But the program doesn't install.  Any ideas?

    See the further information area of Troubleshooting issues with iTunes for Windows updates.
    tt2

  • When I eject my iPad from iTunes, the program freezes.

    When I eject my iPad from iTunes, the program freezes. The only thing I can do after that is to force quit the iTunes program. I have all updates installed.
    Any suggestions?

    I have the same issue, except I have an iPad that I used with my Windows machine and iTunes.
    Syncing worked fine.  I now have a new iMac (yea), but when I connect my iPad to iTunes on the iMac,
    click my iPad device name and Apps at the top all of the Apps appear on the
    screen except they are greyed out.  I asumme there is some sort of login, but I'm danged
    (trying to be polite) if I can find it.  It is where?
    I did the same overwrite and was quite excited until I restored everything with the Windows machine!
    Thanks,
    Chris

  • Wifi goes on and off, backlit keyboard doesn't work and no sound since Lion  upgrade. I can get the wifi back by going into safe mode and re booting(someone suggested on here), but can't let computer die or turn off or have to do it again.

    My Wifi connection goes off if computer dies or shuts off, I can only make it work if I go into safe mode and reboot, it was just that, but now my keyboard doesn't light up like it's supposed to in low or no light and in system preferences it's like it doesn't exist.  Also, the sound doesn't work, I can't turn it up or down, it shows the sound icon grayed out and the anti symbol when I push F11 and F12, also it's like it doesn't exist in system preferences either. I have never had any problems with my MB Pro, I purchased in Feb. 2010. , but I upgraded to Lion last month, I haven't been using my laptop as much since I had an Ipad I given to me, so I think that's why I didn't notice these issues right away. What do I do? HELP!! Do I take it to Apple? I don't have the Apple care warranty, so will it be expensive for them to fix? Can I get my money back for Lion if I restore to Snow Leopard?

    Take it to an Apple store or AASP. How much it will cost will depend on their determination of the problems. To bad you didn't purchase extended AppleCare. No you don't get your money back for purchasing Lion.

  • When I try to download any application the page does't work. It says that OX can't open web pages that start with aam

    when I try to download photoshop or illustrator the web doesn't work. it says that OS X can't recognize web pages that start with "aam"

    May I know whether you are trying to download Photoshop cc and Illsutrator cc applications?
    Have you installed Creative Cloud desktop application ?
    https://creative.adobe.com/products/creative-cloud

  • Firefox 4 won't run, no solution helps, had to remove and revert to 3.6 which works fine. When will bugs be out of firefox 4. I give up on it. Safe mode, reinstall, etc all never open

    on a vista computer running system suite11 for antispyware nothing I could do would get firefox 4 to run. I downloaded it severeal times after uninstalling, closed the previous attempt at firefox.exe to try again and even tried safe mode though none was successful. I used chrome to do most of this that i don't like as well but it works. In desparation i reverted to Firefox 3.6 which installed and works fine now. I cannot figure out what it is that prevents Firefox 4 from running and am done wasting time. I will use the older version and when no longer supported go to IE or Chrome exclusively

    I'm having this problem. I'm running Windows 7 Home Premium 64 bit. I updated to Firefox 4 from 3.6. I tried uninstalling and reinstalling, but got the same "Firefox has crashed" error. I sent in the report.

  • When I try to update from CS5 menu,  I get an error that they did not install

    I am running CS5 on Windows 8.1.  When I try to update from CS5 menu, it appears updates are downloading, but then I get an error that they did not install (no error number), and contact customer support.  When I click on that I get a discussion about incorret serial number.  I deactivated, then reactivated, get same results.

    Yay!   Finally got it to work.
    Deactivated CS5 and uninstalled.  Then reinstalled.  Downloaded and installed AAM (took several tries before finally got it to work properly).  Then download the updates individually and finally got to install using AAM.

  • When I try to sign in to the support community using one of my email addresses it asks for my apple support community user name and when I type in what I think it might be I get one of several messeges Ie. An account using this e-mail address already exis

    When I try to sign in to the support community using one of my e-mail addresses and I put in nothing or what I thought was my apple support community user name I can get one of several messages
    Ie.1. Please specify a user name
    2.An account using this e-mail address already exists; only one account per e-mail address is allowed on Apple Support Communities
    How do I find out what my Apple Support Communities user name is

    Good luck with this!!!
    EVEN USING what WAS my Username, this is the exact problem I am having having entered my correct ID and Password.
    Rgds
    Rod

  • Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it

    Lightroom 4 launches to Photoshop CS5 when I try to print from Lightroom. How do I change it, so the printing goes directly from Lightroom to the printer.

    MartyOretsky wrote:
    Let me try again. I am in Lightroom and click print. Then I am launched to PS.
    This is not possible.
    What you are seeing is not PS, it's your printer dialog. PS does not have an ICM button.
    And you say: " Lightroom doesn't stop working; rather CS5 stops working"
    And what does the error message say that you posted in the screen shot?  Does it not say "Adobe Photoshop Lightroom has stopped working" ?
    Do not be confused. Adobe Photoshop Lightroom is the official name of Lightroom. This is not CS5 that has stopped working. CS5 does not come on when you hit the print button in Lr.
    It is Lr that has stopped working.
    And you say: "My next step is to click on ICM so the color controls are done by the software."
    This is wrong. When you want Lr to do the color management, you select a profile in the Print Module, in the <Print Job> panel under Color Management / Profile.
    In the screen shot below I have selected a profile for my HP printer and paper. And that's where you select a profile for your printer and paper.
    You do not click on ICM in your printer dialog. You click there only when you want your printer to manage colors.
    So try to print by selecting the profile in the print Module as indicated and do not click on ICM.
    By the way: Which OS? Are you on a Mac?

  • My photos show in lightroom 5 but when i try to print   the file cannot be found

    My photos show in LR5 but when I try to print   the file cannot be found

    Did you buy this directly from Apple or from elsewhere. I've never heard of Lightroom coming pre-installed so it sounds like you MBP might not really be "new."
    Enter your serial number here to check the support status and see if the computer has been previously registered:
    https://selfsolve.apple.com/agreementWarrantyDynamic.do
    If you did not buy it from Apple and that site shows any purchase date other than yours (± a few days), return the computer to the fraud perpetrators who sold it, get your money back, and buy directly from Apple next time

  • When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?

    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks

    sandrafromsilver spring wrote:
    When I try to print from my iPad I see a message "searching for printer" and then "no printer found.".  I have a printer application loaded and it finds my wireless printer.   How do I get the iPad to do the same so I can print from emails, the web, etc?  Thanks
    Go to the following link:
    http://jaxov.com/2010/11/how-to-enable-airprint-service-on-mac-os-x-10-6-5/

  • When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    When I try to print sth I can´t choose my printer. Adobe Reader only shows a printer I used years ago.I aleady deleted and reinstalled the Reader and deleted all other printers from the computer.How can I add a new printer to Adobe Reader?Thanks for help!

    Hi,
    I would suggest you to uninstall Adobe Reader using the cleaner tool and then re-install the latest version.
    Adobe Cleaner Tool:- Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs.
    Latest version of Adobe Reader:- http://get.adobe.com/reader/
    If you still experience the same issue, please share the following information:-
    - Screenshot of Adobe Reader showing printer options
    - Screenshot of Microsoft Word showing printer options
    - Screenshot of control panel- Control Panel\All Control Panel Items\Devices and Printers
    Regards,
    Nakul 

Maybe you are looking for