When I try to print out something on my macbook pro,it cuts off the bottom, but if printed from a pc I get the whole article
when I try to print out something on my macbook pro, it cuts off the bottom, if printed from PC the whole article is printed
marionfromclermont wrote:
I have HP Photosmart 55510 series. In the print dialogue box it shows where the bottom of the 1st page is cut off and the top of the second.
Yes, but the part cut off the bottom of the first page should appear at the top of the second. No content should be lost, just split between pages.
Safari makes little or no attempt to keep a line of print or a picture from splitting across pages, seemingly just imaging the web page as one large image and printing so many inches or millimeters of the image per page.
Similar Messages
-
When I try to update my apps on my MacBook Pro, Ipad, and Ipod it wont allow me. On the computer it says theres and error. (11111) But on the Ipod and Ipad it starts to update and completely stops. What should I do?
Maybe this.
Fix iPhone Apps Stuck "Waiting" During Installation
Try update the apps one at a time -
When i try to install a program in my macbook Pro, the message appear: Run preflight scrip and after Run the postflight script. How i'll fix this?
Here are the Mac requirements:
System Requirements Mac Version (*)
Mac OS X 10.6.1, 10.7.1, 10.8.1 or 10.9.1
1.83 GHz cpu or better
Nvidia Geforce 8600, ATI Radeon X1600 or better (min 256 MB VRAM)
1 GB RAM
2 GB free hard drive space
DVD-ROM Drive
Are you sure that you have the Mac version, as there is a Windows version, as well as a few game console versions.
Sounds as though that may be a Windows or other version. -
I was launching my sims game when I plugged in my portable charger in my MacBook Pro. As soon as I plugged it in, I heard a tiny poof and next thing I know the screen turned black. I held down the power button like I normally would and it wouldn't work. when I plug in the charger, there is a faint green light. Please help anybody. Thank you for your time.
Something broke I'm afraid. Take it (and the charger) to an Apple Store, leave it unplugged.
-
It loads as if nothing were wrong, but when I try to click on any program, the cursor just spins and spins. Even when I click the Apple in the upper left corner nothing happens. The cursor just spins. When I hit the keys for force quit, nothing happens. Nothing will open.
I've loaded it in Safe mode, verified the disk (it was okay), and verified and repaired permissions and I am still having issues. When I load in Safe mode, all applications work just fine. I've deleted all contents of my downloads folder (before my computer messed up, the last thing downloaded on my computer was a word document from my friend's email that she'd opened on previous computers with no issue). I don't know what else to do. I have Windows loaded on my Mac and can log-in the Windows side with no problems (that's how I've been using my computer since my Mac side has stopped working).
I'm running version 10.6.8.
Any help would be appreciated!Select Help ▹ Installed Plug-ins from the Safari menu bar. Besides the following, what plugins are listed?
iPhotoPhotocast
Java
QuickTime
Shockwave Flash
WebKit built-in PDF -
When i try to install windows 8 with bootcamp on my Macbook pro (early 2011) it says it only supports windows 8, how can i fix this?
bootcamp mean dual boot which mean a dual osx install
virtual machine is installing another operating system as an applications so to speak
http://en.wikipedia.org/wiki/Virtual_machine -
After I downloaded Firefox 4, I tried to open it and it repeatedly gives me this message "Your computer must be restarted to complete a previous upgrade of Firefox. Do you want to reboot now?" I cannot get past this message. I tried to uninstall this program in order to reinstall, but when I try to do that, I get this same message. I cannot get past this message. I don't know what to do next.
Hi arpriltime,
Have you looked at our [https://support.mozilla.org/en-US/kb/firefox-crashes-or-flash-plugin-crashes Flash plugin troubleshooting section]? There is a lot of useful information in there that should help you get to the bottom of your issue.
Hopefully this helps! -
Hello,
I am not sure what is going on but I am unable to sign into my iMessage. I am trying to sign in but I keep getting the message: "Could not sign in. Please check your network connection and try again." I can log into iTunes and all other things that request my Apple ID except the iMessage. I hope someone can help me out.iOS: Troubleshooting FaceTime and iMessage activation
-
My new Macbook Pro 13" won't register properly on our school's projectors when I try to run PPT (Epson EB510)! Instead, colored bars go across the screen against a black background. No matter how much I try to adjust the displays, PPT won't show on it. However, my friend's Macbook Air works fine. She's 10.7.2, I'm 10.7.4, so we're both more or less OS X Lion. What could be wrong? Can I do anything to fix it?
Make sure that your display is not mirrored. Mirroring forces you into "lowest common denominator" screen resolutions that can safely be displayed on BOTH screens, which may not be good enough for the projector.
When you turn off Mirroring, you get Extended Desktop, where the two screens are joined along an edge to form a larger Extended Desktop. To use this, drag a window onto the "other" screen. -
Alert! Couldn’t contact Spell Checker. I keep getting this message when I try to type a mail in yahoo. I get the beach ball and it slows down everything.This has been happening since yesterday. Please help if anyone else has had similar problems or has ideas to fix this. Thanks.
Chris,
I am having Spell Check probs too - it underlines, but that's all. I Googled and tried 5 different places for an answer - even 'jumped the pond'....but got no answers.
i started a thread, "Spell Checker on the fritz!!", and got one good and reasonable answer...
only it didn't work. It involved a .plist file, and once you toss one and do a re-start, it's supposed to re-build itself. But, no, SpCk still 'on the fritz'. I'm going to do one more re-start, but otherwise....
May the first one on either thread that gets an answer that works - PLEASE let us all know.
Keep your fingers crossed and hold your mouth right - lol. Nikki B. -
when trying to add new mail to my macbook pro it crash on me
help please
thank youHello BassoonPlayer,
Since you are using one of the the school's Macbooks, it is quite possible that the time and date are not properly set on the computer that you are using. FaceTime will not work if you do not have the proper time zone set up for the location that you are in. This past week, there were a two other Macbook users I've helped by simply telling them to set the Date/Time properly. By the way, you described your problem very well, which makes it easier for us to help you. Hope this solves your problem -- if not, post back and I can suggest other remedies.
Wuz -
I just purchased and installed a Canon Pixma MG5220 printer/copier/scanner to my PC desktop with Windows XP. It works fine. It has been successfully installed on my network and I am able to use it with my laptop running VISTA. However, I am trying to connect it to my MacBook Pro OS 10.6.8 and I am not having much luck. I can see it as one of the printer choices when attempting to print; however, I get the following message:
NT_STATUS_ACCESS_DENIED
I have been searching for answers, but nothing seems to work yet. Does anyone have any suggestions?
Thanks.Let me understand:
- you have purchased named canon, which is conencted to your PC running windows xp
- downloaded driver for win xp, and canon works fine
- canon is connected to that PC via USB
- that Canon is also activated as network printer, by allowing print sharing in windows; how did you set that option?
- now, you are in Mac OS x 10.6.8, downloaded Canon driver for Mac OS X, installed it, detected printer on the network, printer was installed; was it detected as attached to that PC running win XP? or not?
or you set canon by being connected to your mac directly via USB?
Now, there are some questions you should answer as some details are missing, and your initial text is not clear. Can you print if Canon is connected directly to your mac? did you try that? if not, do it before answering. -
Error 150:30 when I try opening InDesign (CS4) on my new macbook pro.
I keep getting Error 150:30 after setting up my new MacBookPro and restoring from backup. When I open InDesign (CS4) it says Licensing for product has stopped working. PLEASE HELP!
Hi there,
I'd try a fresh install. You can download the installer here: Download CS4 products
Please make sure you are signed in with Adobe ID first.
Here's more info on the error code: Error "Licensing has stopped working" | Mac OS
Let us know how it goes!
Amy -
Thnx for any help.
Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the recovery desktop appears, select Utilities > Terminal from the menu bar.
In the Terminal window, enter “resetpassword” (without the quotes) and press return. A “Reset Password” window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled “Select the user account” if not already selected.
Follow the prompts to reset the password.
Select Apple menu > Restart from the menu bar. -
I have tried to sync my shuffle to my macbook pro. But I keep getting the unknown error message above. All I want to do is import the playlist so I can get my new iPod up and running. Any suggestions?
Maybe a more appropriate place to post
iTunes
And if you want to discuss your MBP:
MacBook Pro
Maybe you are looking for
-
How do I merge 105 PDF's into a Single PFD?
How do I merge 105 pdf's into a single PDF. I have already tried doing this in PREVIEW, selecting all, and then saving, and saving as. But it is for me, to no avail. When I re-open, all I get is the first page. please help.
-
Video output from ATV is "blurry"
Here's a strange one. I have an ATV connected to a Sony Bravia W series 1080p TV via component video . The output from my ATV is "blurry" on the screen, but otherwise functions fine. When I power off the ATV and back on (remove the power cord), the p
-
hello friends, i was trying to do LSMW with recording of MM01, everything looked fine till the last step, data was imported and was appearing in the 13th step, but when i executed the session created in the last step, with extended log, the screen a
-
How to transfer textedit documents among other documents from my older macbook to my ipadair?
I have an older macbook(10.5.8) model which contains various documents including textedit documents, how can I easily transfer them to my ipadair? I tried a few ways but wouldnt work! I hear emailing is the only solution, is this true! Thank you for
-
Pulse Measurement without a digitizer-Is this doable ?
I have the need to measure a pulse in the 100ns range. I can control the voltage level that I feed into the circuit. I would like not to have to use a digitizer card (scope). Would this be possible with a simple voltage divider into a comparator circ