When i try to record a video it does not work

When i try recording something the video does not start recording and it does not save

This started for me today, too. I have turned my phone on and off, but I don't want to lose all my info by resetting my phone.
What do I do to backup all my pics, phone numbers, texts, etc before I restore my phone? then once the restore is finished, how do I get this stuff back on my phone?
thanks,
hemi.powered4x4

Similar Messages

HT203712 I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just

I have a 2011 tahoe. My bluetooth functioned properly until I updated my iPhone. Now the iPhone connects to the Tahoe but when I try to call a number it does not work. Either it cals the number and has no outgoing or incoming sound or it just says it iis unable to complete the call.

I would check with the Auto dealer where the vehicle was purchased to check and see when the bluetooth software was last updated on your vehicle. With the vehicle being a 2011 and if the software has not been updated since the dropping of IOS 7 then obviously there will be software incompatibilities.
Good luck.

I can't restore the back up of my phone and when i try to sync my phone it does not work totally nether what should i do ?

i am trying to sync and back up my phone but it never works, so i tried to restore my back up but a message is telling me that an error occured so it does not work. It caus me a problem because i won't stop receive messages telling me that my iPhone as no space available even if i have deleted a lot of things.. help me please!

It might be the battery, it sure sounds as though it could be. What happens if you leave it to charge, does the charging symbol show, does the battery icon show full, part full or empty at any time?
If you check here; https://locate.apple.com/uk/en/ and enter your postcode in the Service box, you should see the options available to you from Apple and its Authorised Service Providers. They can advise you about the battery and you should be given the cost before you commit to spending your dosh!

When i try to use Command c it dose not work at all with any program but Command x and v works ?

when i try to use Command c it dose not work at all with any program but Command x and v works ?
i don't know what to do and how to fix it and why it habend ??????!!!!!!!!!

Open the Speech pane of System Preferences and check whether either the listening key or the speech key has become set to that keystroke; if so, change the setting.
(63123)

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please.

Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!

Grum12 wrote:
Hi I'm a total novice, as you will see. But Iam trying to use template of an employee schedule but when I try to add extra columns it does not add the preset formula with it, so it works out total hours and total pay?   If any one can help please before I throw it through the window!
Hi Grum,
If the formulas aren't filling to the new column, you must have changed something in the template since you first opened it. Numbers is rather fussy about filling row content in columns as they are added. Only rows with the same expression in every Body Column will fill when a column is added. Just as an experiment, start a new Employee Schedule document from the Template Chooser and then add a column by clicking the Add Column handle in the upper right corner of the table. If that works, as it should, then think about what might have changed in your working document to disconnect that feature. Maybe we can figure it out together.
Jerry

HT1349 before i do updates for my iphone(to 5.0.1) i close my SIM card, i can not complete the update proccess becouse SIM is closed also i can not activate iPhone becous the SIM must be opened. when i try to open it , the networks does not appear (no se

before i do updates for my iphone (to 5.0.1) i close my SIM card, i can not complete the update proccess becouse SIM is closed also i can not activate iPhone becouse the SIM must be opened. when i try to open it , the networks does not appear (no service).

Its a serious problem and many people are facing the same issue on both locked and factory unlocked phones.
I wonder when Apple will address to this issue. After all it is losing all its reputation!
See this thread, many users are encountering the same issue:
https://discussions.apple.com/thread/3425746?start=75&tstart=0
I believe its a software issue and could be solved asap Apple fixes it!

HT5035 I have a 75 dollar balance in my account but when I try to make a purchase it does not let me purchase against my account.

I have $75.00 in my account but when I try to purchase a song it does not deduct from my account and the purchase cannot be completed.

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Satellite 1800-100: video-out does not work

He,
I just installed windows XP on my old Satellite 1800-100, but now my video-out does not work anymore. So I just downloaded the latest driver, but there's no way I can get it installed. According to Windows the new driver isn't newer, so it won't let me update it. And when i try to unistall the display driver, I have to reboot before it takes effect, and wile rebooting it automaticly installs the standard driver again.
Can anybody help me?
Greets,
Daan

Hi
Do you mean TV- out port or monitor port? As far as I know this unit is preinstalled with WXP Home and all drivers can be also used for WXP Pro.
Did you preinstall your own OS (non recovery image)?

Installed Premiere Pro CS4 but video display does not work?

I just got my copy of CS$. After installing Premiere I found two things that seem very wrong:
1) video display does not work, not even the little playback viewer next to improted film clips located on the project / sequence window. Audio works fine.
2) the UI is way too slow for my big beefy system.
My pc is a dual boot Vista-32 and XP system with 4GB of memory installed and nvidia geforce 280 graphics board with plenty of GPU power. The CS4 is installed on the Vista-32 partition. My windows XP partition on the same PC with Premiere CS2 works great and real fast.
Any ideas how to solve this CS4 install issue?
Ron

I would like to thank Dan, Hunt, and Haram:
The problem is now very clear to me. The problem only shows up with video footage imported into PP CS4 encoded with "MS Video 1" codec. So this seems to be a bug. The codec is very clearly called out and supported within various menues but video with this codec just will not play in any monitor or preview window. In addition the entire product looks horrible with respect to performance while PP CS4 trys its best to play the video. Audio will start playing after about 30 seconds. And once in awhile part of video shows up at the wrong magnification before blanking out again.
My suggestion to the Adobe team: fix the bug and add some sample footage to the next release so new installations can test their systems with known footage.
My PC is brand new with the following "beefy" components:
Motherboard
nForce 790i SLI FTW
Features:
3x PCI Express x16 graphics support
PCI Express 2.0
NVIDIA SLI-Ready (requires multiple NVIDIA GeForce GPUs)
DDR3-2000 SLI-Ready memory w/ ERP 2.0 (requires select third party system memory)
Overclocking tools
NVIDIA MediaSheild w/ 9 SATA 3 Gb/sec ports
ESA Certified
NVIDIA DualNet and FirstPacket Ethernet technology
Registered
CPU: Intel Core 2 Quad Q9550
S-Spec: SLAWQ
Ver: E36105-001
Product Code: BX80569Q9550
Made in Malaysia
Pack Date: 09/04/08
Features:
Freq.: 2.83 GHz
L2 Cache: 12 MHz Cache
FSB: 1333 MHz (MT/s)
Core: 45nm
Code named: Yorkfield
Power:95W
Socket: LGA775
Cooling: Liquid Cooled
NVIDIAGeForce GTX 280 SC graphics card
Features:
1 GB of onboard memory
Full Microsoft DirectX 10
NVIDIA 2-way and 3-way SLI Ready
NVIDIA PureVideo HD technology
NVIDIA PhysX Ready
NVIDI CUDA technology
PCI Express 2.0 support
Dual-link HDCP
OpenGL 2.1 Capaple
Output: DVI (2 dual-link), HDTV
Western Digital
2 WD VelociRaptor 300 GB SATA Hard Drives configured as Raid 0
Features:
10,000 RPM, 3 Gb/sec transfer rate
RAM Memory , Corsair 4 GB (2 x 2 GB) 1333 MHz DDR3
p/n: TW3X4G1333C9DHX G
product: CM3X2048-1333C9DHX
Features:
XMS3 DHX Dual-Path 'heat xchange'
2048 x 2 MB
1333 MHz
Latency 9-9-9-24-2T
1.6V ver3.2

Video Filter does not work.

Hello.
I have been using Final Cut Pro 4 for a while and it worked fine before. But recently, any function of Video Filter does not work. I apply them to the clip, but the image does not show any changes on Canvas.
Is the software's problem?
Thanks in advance.
Ying

For a reason unknown to me, FCP's preference files (there's 3 of them) will sometimes become corrupted and need to be trashed. Usually the symptoms are things just not working as they did earlier, or weird issues like the 3 Way Color Corrector looks different than before ... stuff like that.
FCP Rescue is a freeware app (yes, you'll need to download it) that will create a backup set of preferences, thereby retaining all of your settings. Then when (not IF, but when) FCP's preferences become corrupted, you can run FCP Rescue to replace the bad set with a fresh new set.
Otherwise you can delete the files yourself (make sure FCP isn't open at the time) and the next time you launch FCP, it will revert back to the factory settings.
-DH

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work.

Since I installed Lion on my macbook the LED light does not pulse when I close the screen - the sleep function does not work neither when chosen after pressing the button nor chosen in the apple menu..

I have had the same problem but on another forum it was suggested that disabling internet sharing would solve this. This fix seems to work on my machine - why it works I do not understand

HT4859 every time I try to restore my ipod it does not work...how come?

every time I try to restore my ipod it does not work...how come?

The only way to clear off the passcode is to restore the device. You could always try the restore process on another computer that has iTunes just to get the iPod working again, then you could plug it back into your comptuer to sync all of his content back on the iPod.

I redeemed my itunes card, but everytime i try to buy a song it does not work, how do i fix it?

i redeemed my itunes card, but everytime i try to buy a song it does not work, how do i fix it?

Have you tried first redeeming the cart into your account?
iTunes Store: How to redeem a code
Next contact iTunes
Contact iTunes

Creative cloud installed on the desktop, but when I start the window is white and does not work

can someone help me?

Thank god be with
2014-08-25 15:14 GMT-03:00 Sheena Kaul <[email protected]>:
Creative cloud installed on the desktop, but when I start the window
is white and does not work created by Sheena Kaul
<https://forums.adobe.com/people/Sheena+Kaul> in Adobe Creative Cloud - View
the full discussion <https://forums.adobe.com/message/6672088#6672088>

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

How do I reject incoming calls on Ios7 when locked? Power button on top right does not work.

I am also facing the same issues. Sometime i get an option to reject call and sometime i won't .
Tried all the basic troubleshooting i could from my end but nogo. Also tried complete reset by loosing data still the same results. Any suggestions and fix, Apple ???

When i try to record a video it does not work

Similar Messages

Maybe you are looking for