When I try to reformat there is an error message about configurations with the pointing device
When I try to reformat there is an error message about configurations with the pointing device
I am not sure I am on the correct section in the support area for Lenovo.
I had a mouse issue. It was unable to read the mouse. Now the mouse is working and it is initialized.
I have no idea why.
There is an error message saying that I should press F 1or F2. I pressed down F 1 and I tried to work with it and I enabled the mouse or I tried. The mouse is working fine but the computer will not recover completely the way it used to.
It is very confusing. When I shut down and restart there is an message that was not there before about the pointing device. Also the recovering operation never asked me for disks. Now it is doing that. I have disks but this is all confusing. I just want the computer to be the way it was. It is working fine except for booting up and the messages.
Hi marissa, welcome to the forums,
you may or may not be in the right place, but it would certainly help members to help you if you could post exactly which Lenovo system; notebook / computer, you have and which operating system is installed on it.
Thanks in advance
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog
Similar Messages
-
I just want to download Firefox 3.6 again
I downloaded Firefox 4 onto my PowerPC G4, 1.67GHz running Mac OSX 10.5.6. When I try to open it I get error message You cannot open the application “Firefox” because it is not supported on this architecture.Use Tony's suggestion. I am running it right now and it is awesome. I love Mozilla but they basically screwed all of those older Macs over. Come on Mozilla. These Macs still work, and there are plenty of people with them out there.
-
Since I "upgraded" to FF 4, I have constant crashes (I tried updating my graphics drivers--it did not help) and now all of my bookmarks have disappeared. When I try to restore them, I get this error message "Unable to process the backup file". I have lost years of bookmarks...please help.
I am using Windows XP, SP 3 if that matters.I am also unable to restore any of the backups of the bookmarks, both automatic backups and two backups that I created manually. Since I was able to restore backups before, and since no changes have occurred to these backup files, the problem must be with Firefox.
Right before my bookmarks disappeared, FF crashed and I accidentally started FF 3.5. When I saw what I did, I ended the Firefox process and started FF 4. That's when all my bookmarks were gone and I discovered I couldn't retrieve any backups. I did note that an add-on was updated when I restarted FF. Maybe that's the problem. Does FF have a Safe mode? -
When I try to photomerge there is an error and photoshop shuts down
when I try to photomerge there is an error and photoshop shuts down
I'm flabbergasted by this, as I've found just he opposite - that Photomerge in Photoshop CS6 does the job better and more reliably than any prior version.
I'm using PC. I wonder if it could be a platform-specific problem.
Just for fun while typing this I just stitched a 26221 x 4777 pixel pano of a marina directly from raw files (something I could not do reliably from Photoshop CS5 - I always had to convert the files first). Such an image is particularly challenging as the surface of the water changes completely from shot to shot. It finished successfully in just a couple of minutes.
-Noel -
i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks
sos1der wrote:
pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
sos1der wrote:
but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
That's an entirely different issue, unrelated to your iOS devices. -
when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly
I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
HP Photosmart Premium Fax All in One - C410a
I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print. Since then I've been able to resolve my specific problem.
I
1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found),
2. grabbed the software/driver update from Aug, 2010,
3. installed the Aug, 2010 update, and my problems seem to have been fixed.
This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&... -
my ipad 3 is stuck in the "connect to itunes" mode. whether i restart or try to restore. when i try to restore itunes gives an error message saying an unknown error occurred (-1). any help.
That error sometimes indicates a hardware problem. See 2nd link below.
Update and restore alert messages on iPhone, iPad, and iPod touch
http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Take it to an Apple Store for evaluation.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Cheers, Tom -
When I try to open iTunes, I get this error message: "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I've been able to uninstall all Apple products except iTunes as I get this error message: "The Installer has insufficent privileges to modify this file: C:\Program Files\i Tunes\Acknowledgments.rtf." I've had the iTunes on my laptop for a year and a half with no problems until now.
Any suggestions please?
-
i am getting the error message "cannot communicate with the server" when i try to sign into my apple account on my ipad - any ideas???
Welcome to the Apple Community.
The following article(s) may help you.
Photo Stream ToU's -
When i try to open iTunes I get error message "MSVCR80.dll was not found"
When I try to open iTunes I get error message "MSVCR80.dll was not found"
Hey Manyangels!
Here is an article that will help you troubleshoot this issue with your iTunes:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for coming to the Apple Support Communities!
Regards,
Braden -
When I try to download iTunes, I get error message indicating that the download program is for 32-bit, whereas I have 64-bit. How can I download 64-bit iTunes installer?
What version of windows do you have ? 64 bit only exists for Vista and Windows 7, not for XP (http://support.apple.com/kb/DL1047)
-
When I try to sync my iphone an error message says iphone cannot be synced you do not have enough access privelage for this operation
You probably didn't install iTunes from a user account with Administrator privileges.
-
when i try to open indesign i get error #5. i've rebooted the computer but still get it... any idea?
-
HELP!! I am trying to record a presentation on Adobe Presenter 10, I have had no problems in the past, I added motion to some of the boxes in my presentation, now when I try to record I get this error message!!!
Adobe Presenter
Adobe Presenter has encountered an unexpected problem while
working with this presentation. Try saving your work to a new file and
restarting PowerPoint. If the problem persists, consult the Help menu
item, or contact support at http://www.adobe.com/support/presenter.Please provide your system specification. Also is it happening on a specific presentation or every presentation.
Regards,
Rajeev. -
When I try to log in into my facetime it tells me tha the registering device does not have apropiate credentials. how do I fix it?
Check for the latest updates for your OS, you'll get that error message if you do not have the latest security updates for your operating system.
Maybe you are looking for
-
Is it possible to create a "virtual" copy of an object in illustrator?
In other words, lets say that I've got an object (that might be a simple object like a square, or a complicated group, or anything). I can select the object, copy it and then paste it at some other location, but now it is a separate object. What I'd
-
Windows 8 final on Windpad 110W
I'd like to report a 90% successful install of Windows 8 x64 Professional on the Windpad 110W. What I can't get working is revealed at the bottom. Lessons learned: The built in SSD card is very bad - it's actually slower than a mechanical hard drive,
-
en Adobe Premiere Pro CS4 si crea un proyecto nuevo y vaya a la pestaña presets secuencia entonces a la carpeta HDV se limita a 720p30 HDV, pero tengo un video grabado HDV 720p50, so there is any workaround or plugin that you could recomend me. thank
-
I have been unable to play some songs and all of my audiobooks purchased from iTunes. Apple support has been terrible. I just downloaded iTunes 7.0.2 but it did not help. Apple - you have a serious problem here!!! This is becoming a very expensive an
-
In iMovie I cannot open iPhoto or iTunes
I have a macbook pro and have made several movies in iMovie, but on my new project I cannot open iTunes or iPhoto. Any suggestions?