When I try to restore my iPod it says "itunes error 9006".

I've done all updates for iTunes & IE8. I've checked security settings and everything.
No matter what I do, I get error 9006 when I try to restore it. How do I fix this?

Try this article:  http://support.apple.com/kb/TS3694
This is the info for error 9006:
Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.

Similar Messages

  • When i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet ?

    when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • TS1441 when i put an album on itunes it will not go onto my ipod,it ipod is corrupted .when i try to restore my ipod it says i am not connected to the internet

    if i put an album on my computer it will not transfer to my i pod it says my ipod is corrupted.if i try to RESTORE it says i am not connected to the internet when i am please help.

    What is the error message you receive when you try to restore the iPod?
    B-rock

  • HT201210 when i try to restore my ipod it says there is an error,is there any way i can fully restore it wothout a problem

    everytime i try to restore my ipod the first step is fine but then it just stops and says error. Is there any way i can stop this?

    Hello,
    Try completely reseting the device back to the factory defult, then try to restore it again.
    I hope that works.
    ~Lt. Leviathan

  • HT201210 I am not able to start my iPod. In itunes when I try to restore my ipod it throws an Error 1601..please help!

    my ipod stopped working and I am not able to start it. When I connect it to my computer and start itunes, it ask me to restore the device but that too gives an error (1601). I have tried the recommended soln but that didnt help.
    What should I do?

    Hello Ephremekka
    Start your troubleshooting with the article below to get your iPod Classic to show up in iTunes to be restored.
    iPod: Appears in Windows but not in iTunes
    http://support.apple.com/kb/TS1363
    Regards,
    -Norm G.

  • When i try to reset my ipod it says an error has occured (28)

    can some one tell me how to fix this problem and also my ipod touch wont turn on some times i have to hit the home button and the on button at the same time to turn it on other wise it wont turn on ?

    Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.
    Above from:
    http://support.apple.com/kb/TS3694#error28

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • My phone will not come on,when i try to restore the phone it says the iphone could not be restored unknown error occured 21 someone please help!!

    can some one help me with this ? i tried to do hard reset no luck, when i try to restore the iphone it says unknown error 21

    Yeah i getting the same error on my iphone3gs. Ive tried eveything i think if you find something out PLEASE let me know. Im going to send mine in though bc i cant take going with out a phone anymore. GOOD LUCK!!!!!

  • When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

    When I try to restore my iPod, it stops restoring at the same place and doesn't work. How do I fix this and make it completely restore itself?

    Did you make sure that your security software allows iTunes to contact Apple during the restore process? http://support.apple.com/kb/TS3125

  • When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes

    When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes

    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    Are you trying to restore to a PC or an Mac?  Either way, I'd remove iTunes, empty the trash, restart, and download/install the latest version.  Also, check the versions of OS that the latest build of iTunes will work with.

  • I keep getting error 1603 when I try to restore my iPod why?

    I keep getting error 1603 when I try to restore my iPod why?

    Error 1604
    This error is often related to USB timing. Try changing USB ports, using a different dock connector to USB cable, and other available USB troubleshooting steps (troubleshooting USB connections. If you are using a dock, bypass it and connect directly to the white Apple USB dock connector cable. If the issue persists on a known-good computer, the device may need service.
    If the issue is not resolved by USB isolation troubleshooting, and another computer is not available, try these steps to resolve the issue:
    Connect the device to iTunes, confirm that the device is in Recovery Mode. If it's not in Recovery Mode,put it into Recovery Mode.
    Restore and wait for the error.
    When prompted, click OK.
    Close and reopen iTunes while the device remains connected.
    The device should now be recognized in Recovery Mode again.
    Try to restore again.
    If the steps above do not resolve the issue, try restoring using a known-good USB cable, computer, and network connection.
    Error 1603
    Follow the steps listed above for Error 1604. Also, discard the .ipsw file, open iTunes and attempt to download the update again. See the steps under Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations.If you do not want to remove the IPSW in the original user, try restoring in a new administrator user. If the issue remains, Eliminate third-party security software conflicts.

  • When i try to Restore my iPod touch 4th gen it says "error" can anyone help!?

    When i try to restore my iPod touch 4th gen it says "error" can anyone help?!

    Was "error" the complete wording of the error message?

  • When I try to restore my iPod i get the iPod is corrupt error...

    Ok, i've read through the answers that have been given for the error that comes up when people try to restore their iPod and get this:
    "iTunes has detected an iPod that appears to be corrupted. You may need to restore this iPod before it can be used with iTunes. You may also try disconnecting and reconnecting the iPod."
    so i get that message when i plug in my iPod still...even after having gone to the Apple Store to try and get it fixed. They fixed the actual iPod but still no success with the computer. And every time I plug in the iPod i get the message about it being corrupt and needing restore.
    But whenever i click "Restore" i get a message saying: "There was a problem downloading the iPod software for the iPod "iPod". The requested resource was not found."
    someone PLEASE help! I'm getting frustrated beyond belief here, i've tried the chkdsk stuff, and the bit about removing the iPod update software folder, if that's the same solution set, then i forgot what the other part was, but i've tried both of the suggested and nothing's working.
    please someone help.

    I got this under XP before. I was totally baffled until I realized there was a network drive mapped to the same place XP was trying to mount my iPod. The common symptom is that you'll get this sort of "corrupt" error on one machine but it works ok on a friend's machine. If that's true for you, you can change the network drive mapping to another drive letter (easiest) or mount your iPod and change its drive letter in the disk management control panel (under admin tools).
    Hope that helps... this one just about had me pulling my hair out until I recognized the problem.

  • HT201210 keeps saying "ipod update server could not be contacted or is temporarily unavailable" when i try and restore my ipod touch..any ideas?

    keeps saying "ipod update server could not be contacted or is temporarily unavailable" when i try and restore my ipod touch..any ideas?

    Try:
    - Powering off and then back on your router.
    - iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • TS3694 Why am I getting error code 3194 when i try to restore my ipod?

    Why am I getting error code 3194 when I try to restore my ipod touch 4th generation

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    http://support.apple.com/kb/TS3694#error3194
    Also see:
    iPhone Error 3194 - How to Fix iTunes Error 3194?

Maybe you are looking for

  • Strange issue in Report Builder

    Hi All, I am facing a strange issue in Report Builder. I am having a report which is currently in production. when i am opening that report and just saving it without making any changes, then also the size of the report is reducing from 238 to 204 kb

  • Alv selection screen issue.

    Hi,    In my requirement i want to disable the screen field based on condition. in input screen.. posting date------------select option period------------------paramter if user enters posting date means want to validate period or throw error message.

  • ABR delta

    Hi Experts, I am using 2LIS_02_ITM. It uses ABR images for 0recordmode. I found in psa for a certain PO, the image is Blank which means After image.There is no other images. I like to clarify what does this mean. Does it mean that this is a new recor

  • Questions abt loadbalancing and WEBCACHE

    Can anybody provide documentation according to questions raised here. 1.for loadbalancing we r thinking of using Web Cache(it will come with oracle10.1.2 app server). what does web cache do other than load balancing? 2.How loadbalancing does work in

  • InDesign CS4 installiert auf einem XP Rechner stürzt bei "klick" auf Desktopsymbol ab?!?

    Hi Leute, hoffe auf Hilfe!! Habe eine neue Arbeitsstelle und dort ist InDesign CS4 installiert auf einem XP Rechner, wenn das Programm läuft und man "klickt" in der unteren Symboleleiste auf das Desktopsymbol dann stürzt InDesign ab?!? Was ist da los