When i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet ?

when i try to restore my ipod touch 4g itunes keep telling me that to make sure that my network setting is correct,and make sure that i connected to the internet,wht is that supose to mean i allredy connected to the inter net but i dont know how to make sure that my network sitting is correct help me plz

Try:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

Similar Messages

  • HT201413 I keep getting error message (26) when I try to restore my iPod touch 3G

    I keep getting error message (26) when I try to restore my iPod touch 3G

    Try:
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

  • When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes

    When I try to restore my iPod touch 4G I get error 3194 and I have the latest version of iTunes

    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    Are you trying to restore to a PC or an Mac?  Either way, I'd remove iTunes, empty the trash, restart, and download/install the latest version.  Also, check the versions of OS that the latest build of iTunes will work with.

  • When i try to Restore my iPod touch 4th gen it says "error" can anyone help!?

    When i try to restore my iPod touch 4th gen it says "error" can anyone help?!

    Was "error" the complete wording of the error message?

  • What do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?

    what do i do when i try to sync my ipod touch to itunes and it shows me an error message that the sync session failed to start?

    Hello brainiac08
    Typically that error occurs because of a backup issue. Check out the article below to resolve it.
    iOS: Troubleshooting backup issues in iTunes
    http://support.apple.com/kb/ts2529
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • TS3694 Error codes 11, 2005, 1601 keep poping up when i try to restore my ipod touch 2nd gen.

             Everytime i try to restore my ipod touch 2nd. gen. i get one of three error codes. (11,2005, 1601)  I have done many things to help make it work and nothing has.  Can anyone help me please also i have windows Xp

    You found the answers, they are in the article which you posted your question from.
    Go back there and read it... then do as it says to resolve the issues.

  • Why am I getting an error 306 when I try to update my ipod touch on itunes?

    When I try to update my 3rd gen iPod Touch 32gb on my newly updated itunes, it tries to update it then gives me an error code 306 cannot update ipod because computer is not connected to the internet... My computer is fully connected to the internet and i can browse on firefox with no problems. Ran diagonstic tests through itunes and they said failure to connect to network. What should I do?

    Try disabling the computer's firewall and antivirus duriong th download and update.
    Are you sure it iserror 306? That is not listed as a error message in Apple's troubleshooting.

  • When I try to restore my iPod it says "itunes error 9006".

    I've done all updates for iTunes & IE8. I've checked security settings and everything.
    No matter what I do, I get error 9006 when I try to restore it. How do I fix this?

    Try this article:  http://support.apple.com/kb/TS3694
    This is the info for error 9006:
    Error 9006: Following Troubleshooting security software frequently resolves this error. There may be third-party software installed that modifies your default packet size in Windows by inserting a TcpWindowSize entry into your Registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet size modification for assistance.

  • HT201210 when i try to restore my ipod touch, after i go through the steps then a pop up says that it cannot be restored, what do i do?

    my ipod touch says plug it into itunes, so i do. then it doesnt recognize my device, then it says its in recoverey mode and needs to be restored, so i restore it and after i do a pop up comes up and says that an unknown error has occured and cannot be restored, what do i do?
    and when its trying to be restored the plug does the sound that plays during when you plug an ipod in and out... i dont know what to do please help me

    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.
    from:
    http://support.apple.com/kb/TS3694#error9

  • When I try to restore my Ipod touch because it won't turn on, it registers the ipod as an iphone and says it can't restore it becuase I don't have the latest version of Itunes even though I do? How do I fix this?

    Please help me!!!!

    BEfore you try to Restore it, try a simple Reset.
    Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears (ignore the Slide to Power Off option that shows up first).

  • ITunes Error 11 received when doing a normal restore on iPod Touch 4G iTunes.

    Hi. I'm trying to do a normal restore on my iPod Touch 4G on iTunes. I'm running on the up-to-date firmware of 6.1.6 What I am basically doing is putting my iPod in Recovery Mode, plugging it into my PC, click "Restore and Update", allow iTunes to download the firmware, and let it go. What happens is, right when it is done "preparing for restore", I receive an Error 11. Now, I looked on the internet and it says Error 11 occurs when custom IPSW firmware is involved. This is not the case for me. Maybe I'm looking at wrong sources? I just want to fix this and clean my iPod. Please help me

    Hi there Ajcard,
    You may find the troubleshooting steps in the article below helpful.
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694
    Check for hardware issues
    Related errors: 1, 3, 10-47, 1002, 1011, 1012, 1014, 1000-1020, 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.
    Error 1015 might happen after making unauthorized modifications to iOS, also called "jailbreaking."
    -Griff W. 

  • I get a network connection timed out when I try to restore my ipod touch and I know connection is fine

    My daughter forgot her password on touch.  We have tried to restore, but after 6 or 7 minutes we get a connection timedout error message and it says to try again later.  I turned off firewalls, but that did not help.  Any suggestions?

    Disabling the computer's antivirus and firewall during the download and restore usually resolves that problem.

  • When I try to restore my iPod touch 4g with the ios 5.1.1 downloaded on iTunes, I get either error 3194 or 16xx. How do I fix this? I'd rather not dish out $200 for a new iPod.

    Just tried restoring and it's stuck at "Preparing iPod for restore..." and the iPod is stuck on the connect to iTunes screen.

    The following provides instructions for resolving those errors.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • TS3694 how fix error 3194 on my itunes when i try to restore my ipod touch 4g

    how to fix error 3194 on my itunes

    The following provides instructions for resolving those errors.
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • TS3694 Why am I getting error code 3194 when i try to restore my ipod?

    Why am I getting error code 3194 when I try to restore my ipod touch 4th generation

    This device is not eligible for the requested build: Also sometimes displayed as an "error 3194." If you receive this alert, update to the latest version of iTunes. Third-party security software or router security settings can also cause this issue. To resolve this, follow Troubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to perform unauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. First you must uninstall the unauthorized modification software from the computer, then edit out the "gs.apple.com" redirect from the hosts file, and then restart the computer for the host file changes to take affect.  For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart. Also, using an older or modified .ipsw file can cause this issue. Try moving the current .ipsw file, or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
    Error 3194: Resolve error 3194 by updating to the latest version of iTunes. "This device is not eligible for the requested build" in the updater logs confirms this is the root of the issue. For more Error 3194 steps see: This device is not eligible for the requested build above.
    http://support.apple.com/kb/TS3694#error3194
    Also see:
    iPhone Error 3194 - How to Fix iTunes Error 3194?

Maybe you are looking for

  • Payment Status in PO

    Hi, How can I find out whether the vendor has received the payment for the PO Created by the particular user. I want to find out from the purchasing document such as PO. Because in PO we have the PO History which has the record such as GR and IR but

  • Anyone have experience using ALE message FIDCC2 in a high volume scenario?

    Hi, We are evaluating the use of message type FIDCC2 to send complete FI documents from one SAP system (logisitics) to another SAP system (finance).  I'm particularly interested in throughput performance, as this will be a high volume scenario (300K+

  • Open "project.app" from "project.osx"

    Hi everyone, I created a Director splash using Director MX2004 on WindowsXP. I published my project for Mac ("project.osx"). I also have a seperate project created in Flash CS4 that was published for Mac ("project.app"). Using buddyAPI, I cannot open

  • Create Transfer Order inbound using an Idoc

    Hi all, I need some help on solving the error message-  In our senario we want to send an Idoc (Create Transfer order ) from external system to SAP. Hence i have done mapping for the idoc but everytime i process the idoc- it comes with an error the s

  • Evt has no properties

    hello all, I got error when I put JSP file to portal component.  It works in Tomcat. The client side error is, evt has no properties http://localhost:50100/irj/portalapps/com.sap.portal.epcf.loader/script/optimize/js13_epcf.js?6.45000702   Line 1418