When i try to turn booklet on the screen just lig...

when i try to turn  booklet on the screen just lights up. After a few seconds it turns off again and thats it. anyone help?

- First try resetting the iPod to make it visible in iTunes
Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Next try placing the iPod in recovery mode:
iPhone and iPod touch: Unable to update or restore
- Last try placing the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

Similar Messages

  • When I try to use ITunes Radio the screen just scrolls and plays the same song over and over

    When I try to use ITunes Radio the screen just scrolls and plays the same song over and over again?

    - First try resetting the iPod to make it visible in iTunes
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last try placing the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • When I try to open I Photos the screens just keeps minimizing back to the bottom of the screen

    I have a Mac Book which is 3 mos old. When I try to open I Photos I have to keep clicking on the tab before the I Photos screen actually opens. It does not open to the full screen and when I click on faces or events the app closes out. The three buttons at the top don't highlight so I can enlarge the screen or minimize the screen. The screen only opens to half a page. This never happened before.

    Work through all of the suggestions here: iOS: Troubleshooting applications purchased from the App Store
    Sometimes it helps to download and install another free app from the App Store.
    B-rock

  • Help! i was downloading the new v 4.3.4, when it was almost over it sorta crashed, and now i can't open my itouch! when i try to turn it on, the screen says to connect it to itunes(i have the latest version), but it just won't! this is crazy T_T

    idk what to do!! i've tried temporarily turning off my security software, but my itouch still wouldn't come up in m itunes!

    - First try resetting the iPod to make it visible in iTunes
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Next try placing the iPod in recovery mode:
    iPhone and iPod touch: Unable to update or restore
    - Last try placing the iPod in DFU mode:
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • My macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

    my macair won't turn on. when I try to turn it on, the white screen appears. But instead of the apple logo, there is a flashing folder that has a question mark on it. how do i fix this?

    Try this.
    Erase and Reinstall OS X
    Note: This will delete all data on the disk. Back up important files before continuing.
    Erasing and then reinstalling OS X can give you a fresh start, making your computer exactly as it was whenever you received it from Apple. This can solve various problems such as corrupt system files.
    Shut down the computer by going to Apple () > Shut Down…
    Select Shut Down or allow the computer to shut down automatically.
    Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
    Press the Power Button to turn on the computer.
    Press and hold both the R and Command (⌘) keys on the keyboard until the Recovery partition loads.
    Select Disk Utility and then choose Continue.
    Select your startup disk (Macintosh HD by default) from the left.
    Select the Erase tab.
    Choose the Format pop-up menu and choose Mac OS Extended (Journaled), enter a name for your disk, and then click Erase.
    After the disk is erased, choose Disk Utility > Quit Disk Utility.
    Select Reinstall OS X and then choose Continue.
    Follow the instructions.
    I hope I solved your question.
    Austin

  • I ERASEd WINDOWS. I want to re-install it and before, i'd'like to re-install all the system (10.6.7). But that seems to be impossible. When i try to turn on with the softare and pushing "c", blind screen. When i turn on it normaly, nothing happened. pls,

    I ERASEd WINDOWS. I want to re-install it and before, i'd'like to re-install all the system (10.6.7). But that seems to be impossible. When i try to turn on with the softare and pushing "c", blind screen. When i turn on it normaly, and put the disc after, the process begins and stops 5 minutes after. The computer turns off. Has someone an idea to help me ? Thanks by advance.
    Zach

    Thank you for your answer.
    And...Yes, i did : i inserted the install disc and started up holding the C key. Many time. But each time, the logo of install disc appeared during ten minutes and then, during the installation, he disappeared suddenly with no reason. And in  the same time the computer turn off.
    The beginning of the storry : my son made long time ago (a year) the partition between Mac and Windows. Everything was fine.
    Recently, He decided to give more memory space to windows.
    He could do that directly (perhaps, was there a way but he did'nt know it)
    For this reason, he decided to desinstall Windows in a first step before reinstalling it.
    But before doing this, he decided to re install all the system, like for cleaning his computer...and then, since, it's a big mess.
    You know everythin now.
    Could you help us ?
    Thanks by advance.

  • When I try to access my emails the screen opens but doesn't show any emails

    When I try to access my emails the screen opens but doesn't show any emails

    Tap to open a new tab and Private will be at the bottom left of the page. If it is active, tap to turn it off.

  • When i try to turn my iphone on it just clicks

    When I try to turn my iphone on it just clicks.What can I do?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    I dopped my iphone on the floor today and nothing cracked but when i tried to turn it on, the screen had a bunch of barcode like stripes. even though i cant see the screen, i was still able to type in my password and answer a phone call. how can i fix it?

    YOU can't fix it.  But you can bring it in to Apple for an out of warranty replacement for $199.

  • When I try to open I Movie the screen appears with the message creating thumbnails and all my projects have disappeared. Then everything freezes and I have to force close my Macbook Pro

    When I try to open I Movie thes screen appears with the message "creating thumbnails" and then freezes. None of my events or projects appear in the libraries. I cannot close I Movie or my computer and have to force shut down my Macbook. This is a sudden occurence.

    You can never, never transfer an installed copy of PSE. It's just too complex and it strews stuff all over your hard drive in places the migration assistant is not programmed to look. Now you will need to download and run this:
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
    after which you can go around and manually remove all the bits from Applications, the library at the top level of your hard drive>application support>adobe, and your username>library>preferences. Spotlight will not help with this; it's programmed to skip these kinds of files.
    Then you can reinstall from scratch. Let us know if you need help finding the library folders.

  • When I try to download pdf files, the screen remains gray ... why?

    when I try to download pdf files, the screen remains gray ... why?

    Remove Adobe plug ins if any.
    Macintosh HD > Library > Internet Plug-ins
    AdobePDFViewNPAPI.plugin
    AdobePDFView.plugin

  • My ipad has been turning off every now and again for some time now but last night it turned off and when i try to turn it back on its just a blank screen with the back lighting. please help me

    Hi there, ok so my ipad has been either turning off or just locking itself for sometime now but last night it turned itself off and when i tried to turn it back on it just came up with a blank screen with the back light. When i put it on the charger the sound of it charging happenes but nothing else. I hav tried resetting it but as i am not very savvy with all this stuff i thought i would get some advise before doing anything else. it anyone can help me that would be fantasic
    thank you

    If a reset doesn't work, try and force iPad into Recovery Mode:
    1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
    2. Connect USB cable to computer
    3. Press and hold the Home button down and connect the docking end of cable to iPad
    4. Continue holding the Home button until you see the "Connect To iTune" screen
    5. Release the Home button
    6. Open iTune (make sure you have the newest version of iTune)
    7. You should see "iTunes has detected an iPad in recovery mode"
    8. Use iTune to restore iPad
    Note: You need to be patient and repeat the above many times to recover your iPad

  • When i try enlarge youtube to fill the screen it just opens a full white blank screen

    when i try to show a extended few a just get a large white blank screen.
    this happens with youtube or if a am viewing lets say a shirt and it shows me to click here to enlarge pic and I get this white screen. i am running xp sp3

    I had a same problem and I just fixed it. I don't if firefox update or what update made it but to fix you need to do this:
    When you are at the video, before you make it fullcreen, right click and go to setting, when that opens uncheck enable hardware accelarator and than just click close.
    Good luck :)

  • My ipad is frozen when i try to turn off or on it just shows the itunes logo and the plug in icon

    My ipad is frozen with a itunes icon and the plug in icon I can not turn it off or on When I try to it just comes right back to the itunes and plug in icons

    It is in Recovery mode and needs to be connected to a computer running itunes.

  • My ipad 2 does turn on but every time i try to turn it on the screen flickers then goes blue then turns back off

    well I need help its not even working its freezing cold

    I'm not sure why the device is like that, but if your iPad is freezing cold, don't try to do anything with it until it warms up to room temperature. Once it warms up, if you still see the blue screen and it goes back to black when you try to start it up, try this.
    When starting up, you might see the Apple logo or a red or blue screen for a long time, or your device might restart again. Try these steps:
    Make sure that you have iTunes 12 or later on your computer.
    Put your device in recovery mode.
    When you get the option to restore or update, select Update. This will reinstall iOS without erasing your data.
    I copied that text from here.
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support

Maybe you are looking for

  • Error ERR-1002 Unable to find item ID for item "" in application

    Hello. I have same problem like at guy from last message of this thread Error ERR-1002 Unable to find item ID for item "" in application "11501". I have apex 4.2.1.00.08 Occasionally address box contains comma (f?p=102:LOGIN_DESKTOP:::::,). This bug

  • CRM Interactive Reports show only current year data

    Hello, We have configured CRM Interactive Reports for IC scenario (CRM 2007) and are using reports like 'Service Ticket Volume', 'Service Ticket Closure', etc. The issue is when we run reports (through IC_Manager business role), they only display dat

  • Cannot launch Lightroom 3.3 from direct Camera plug in via USB

    I would like to have Lightroom 3.3 launch automatically when I plug my camera in via usb.  When I plug it in, I currently get the option to automatically launch PS elements, Canon photo programs, Picasa, Windows defaults, etc.  For some reason, Light

  • "Elf64 read error"

    Anyone know what this is and what I can do about it? "Elf64 read error" Comes up when I boot the machine.

  • Deletion of customized package

    Hi experts, I need to delete a customized package which has subobjects. So i deleted each subobject individually into a transport request, I  released the TR. Now when i try to delete package it says there are sub objects in tht package. When i check