When i try to update my ipod touch 4g it comes up error 3194 can anyone help ?, when i try to update my ipod touch 4g it comes up error 3194 can anyone help ?
can any 1 help if so thanks for your help
If your device has been modified, this will not necessarily work...
Unable to Update or Restore
http://support.apple.com/kb/HT1808
Similar Messages
-
I updated my iPod touch 4g 64gb to iOS 6.1 and now it's been very slow, safari keeps crashing, apps being very slow and crashing ? Can anyone help ?
Next
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Go to Settings>Safari and Clear Cookies, Data and History
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
i went to update my ipod touch and restore it. it was working fine and then when it it restarted itself it it stuck onone scren te same one when u first get it, it will not do anythig elts what do i do please help i whont my ipod touch back
Restore loop (being prompted to restore again after a restore successfully completes): This issue is typically caused by out-of-date or incorrectly configured third-party security software. Please followTroubleshooting security software issues if USB troubleshooting does not resolve this issue.
Error 13 and 14: These errors are typically resolved by performing one or more of the steps listed below:
Perform USB isolation troubleshooting, including trying a different USB port directly on the computer. See the advanced steps below for USB troubleshooting.
Put a USB 2.0 hub between the device and the computer.
Try a different USB 30-pin dock-connector cable.
Eliminate third-party security software conflicts.
There may be third-party software installed that modifies your default packet size in Windows by inserting one or more TcpWindowSize entries into your registry. Your default packet size being set incorrectly can cause this error. Contact the manufacturer of the software that installed the packet-size modification for assistance. Or, follow this article by Microsoft: How to reset Internet Protocol (TCP/IP) to reset the packet size back to the default for Windows.
Connect your computer directly to your Internet source, bypassing any routers, hubs, or switches. You may need to restart your computer and modem to get online.
Try to restore from another known-good computer and network.
Error 50: This error (and error -50) are timeout errors. Follow the steps for errors 13 or 14 above.
Above from:
http://support.apple.com/kb/TS3694 -
i have a ipod touch 4th gen and i have the wifi bars but when i try to search something it wont let me conect it says "Lightspeed systems - Wed acces" what could i do help please.! o.o
Does the iOS device connect to other networks?
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
One of my ipod touches and ipad2 will not connect ti itunes. Unknown error keeps popping up 0xE800000A. I have uninstalled and reinstalled itunes. I have restored to original settings but it will not appear on my computer, but will other computer. What to do?
Thanks for the help Ricky.
I did put my iPod into DFU and iTunes recognized it in restore mode. After restore I am back where I was before - iTunes cannot connect because of an unknown error.
I have installed Jailbreak to see if I can bypass itunes but haven't succeeded. I can't get my computer to recopgnize the iPod as a device.
I'll take it to a Genius bar next time I am in the area of one. Until then I'll probably continue to try hacks to get it connected.
Dan -
whenever i connect my ipod touch 3rd gen to itunes itunes responds really slowly and when i try and sync it it says sync in progress on my ipod screen but then is stuck with "verifying "matts ipod" at the top of itunes and stays like that for ages.. help
You buy one and only one download.
As it should have been transferred to your computer when you synced, you can contact itunes support and ask for an exception.
http://www.apple.com/support/itunes -
I can´t remember the security code to unblock my iPod touch and when I try to synchronize it with iTunes I can´t because it ask me to introduce the code that I don´t remember. In my iPod says that it is desactivated and I need to connect to iTunes...so It returns me to the begining...
I already tried to reset the iPod, but it did´t work....
I need to activate again my iPod...Help!!Place the iPod in Recovery mode and connect to your computer and restore via iTunes.
Recovery mode -
hi there, I need help .. I have 2 gen ipod touch and I restore my ipod around 11:00 pm and now its 1:20 am and on my screen its the iTunes logo and the usb cord and when I plug my charger in my laptop .. iTunes comes up and this what it saids "iTunes has detected an ipod recovery mode. you must restore this ipod before it can be used with iTunes" so what do I do.. do I let my ipod died right out & then try it .. because I restore it ,... it was beening to slow... so please help me ?
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
If I charge my iPod 4 touch it tells me to connect it to iTunes ad when I do my iPod doesn't want to turn on what should I do ? PLEASE SOMEONE HELP ME this has happened to me for 2 days
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I have an ipod nano and would like to sync it to a new computer but when I try to do it, it tells me that i will loose all my music and pictutes in my nano to be replaced with what I have on itunes. can anybody help?
See:
Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Basically you will have to transfer its contents to the new computer and then restore the iPod and then resync. An iPod can only sync to one iTunes library.
BTW you posted in the iPod touch forum. -
i updated the spelling of a song in my itunes but its not reflecting when i check my ipod. this never happened before when after i updated to IOS5. please help.
Try unsyncing the sone and then resyncing. That works sometimes. Sometimes restoring from backup works. Other times nothing seems to work.. Yuo are not alone since iOS5 and iTunes 10.5/6.
-
My ipod keeps telling me that my apple ID has been disabled whenever I try to update or buy new apps. I've already changes my password to see if that would fix the problem, but the message is still popping up about my apple ID being disabled. How do I fix this?
Hi Inparker,
When you say you changed your password, did you change it on Manage My AppleID? If so, once you did that, did you sign out of the iTunes & App Store on your iPod Touch? If you did not, then you need to do that, then sign back in with your new password.
Cheers,
GB -
My iPod touch 4G will not charge. I charged it and when I got it off charge it was really hot but showed it was fully charge then when I turned it on again the battery was dead. Now it won't charge. Please help thanks!
Try the standard fixes to rule out a software problem:
- Reset. Nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup
- Restore to factory settings/new iPod
if still problem that indicates a hardware problem and an appointment at the genius Bar of an Apple store is in order.
I suspect you have a hardware problem. -
I've bought my ipod touch 1 week ago,battery drained I charge it,then when I check either it is fully charge it won't turn on at all.I already tried pressing the home and wake button several time and it wont work at allPLEASE HELP ME.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
For some reason, iOS 6 has decided to download on my iPod Touch through WiFi. I didn't request it, nothing is set to automatically update in the Touch settings, or iTunes. It seemed to start downloading when I synced the Touch. I've disconnected the Touch from WiFi temporarily. How can I cancel the download, or will there be an option when it's done downloading to cancel the install?
Thanks for any help...You should really read the manual.
"How do you restore from backup? "
Restore. When given the choice, choose to use backup.
"And how can I check to see if the pics and videos are on my computer somewhere first??"
They would only be where you put them. What program did you use to import them? Pics/vids taken with ipod are not part of the sync process at all. You should be importing them just as you would with any digital camera.
If you did not import them, then they are not on your computer. -
I recently bought an iPod Touch from the US, when I was living there. I am now in India, and my iPod seems to be frozen -- the slider won't slide. So far, I've updated my iTunes and reset and restored the Touch. The problem with the simple solution: there's no Genius bar in India.
Any idea what I can do?Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar
Maybe you are looking for
-
Phone broken: factory reset has lost connection with icloud. Can you help?
I had a problem with my wi-fi. It was a greyscale colour and would not let me sign on to wi-fi. I took it to the shop and they said to do a factory re-set. I did this but I cannot sign on to my icloud to retrieve my numbers and messages etc. My w
-
A couple of times Lenovo have asked for suggestions etc via System Update. This has been a great way of reporting bugs (there are a few) and make Lenovo aware of the problems users have. I have found no other way to report bugs, from small/minor prob
-
Hi everyone, In the payment program F110 I would like to minimize the search of Run Date / Identification to the last 100 and not the last 5000. How can I do this? Kind Regards, Quintin Venter Edited by: Quintin Venter on Mar 27, 2008 10:12 AM
-
Hi Gurus, I had a query regarding the total no. of records in setup table of a particular datasource say for 2LIS_13_VDKON If i want to know the number of entries in the setup table for this datasource how can i do that ? RSA3 extractor can do this b
-
Is third party password software still needed
I use 1Password and it is a mess right now withe syncing because of where I purchased the same app versions from. App store & Agile bits is a no go. Lots of workarounds and I am tired of it. Do I still need it for banking online or is the Mac & Safar