When I try to watch movies on FF using Netflix I get a private browsing error preventing me from doing so even though I do not have private browsing activated/turned on. Solutions?

When I try to play a movie on Netflix I get an error telling me that Firefox's private browsing mode is restricting Netflix from storing settings on my computer.
The suggests were to click the Tools menu and select private browsing. My private browsing was not activated.
Or to click the Tools menu at the top of the browser and select Options, then Privacy and then Remember history. This setting was also as it should.
Additionally, I went into the history and made sure the permanent private browsing was unchecked and I cleared all cookies. Still Netflix is not working.
I called Netflix and they say that everything is streaming correctly from their end and it is this computer. I can watch Netflix on other computers or my TV on this network but not this computer.
I am at a loss at how to disengage private browsing when the private browsing does not appear to be engaged.

I had this problem as well, just right click on the error, and click Silverlight, go to the Application Storage tab, and check enable application storage located on the bottom left corner. Your movies should play after that. If that doesn't work uninstall then reinstall Silverlight, make FF remember history and make sure application storage is enabled on Silverlight.

Similar Messages

  • When i try to watch synced video on my itouch i get "the requested url cannot be found on this server".  I am able to watch the video on my pc in itunes.  however, i cannot watch it on my itouch.

    When i try to watch synced video on my itouch i get "the requested url cannot be found on this server".  I am able to watch the video on my pc in itunes.  However, i cannot watch it on my itouch.  It shows in the video window that the video is there but when i select it to watch it i get the message and then it goes back to the video menu.  It's like it's not really syncing - even though it shows on my itouch.  It doesn't seem to be specific to videos downloaded to the itouch directly or itunes directly.  It's happening to both.

    This is happening to me too. I recently purchased about 4 music videos from iTunes, 3 of them play on both my pc and my iPod Touch but there's one particular music video that will only play on my pc and gives me the same "The requested url cannot be found on this server" message when I try to play it on my iPod. Can someone please rectify?

  • When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitct

    When I try to download the newest version of iTunes, I get the message : "An error occured during the installation of assembly "policy 8.0 Microsoft VC80.CRT type= "win32-policy".version="8.0.50727.6195.public Key Token="1fc8b3b9a1e18e3b.processorArchitecture = "x86" Please refer to help and support.
    Ok I cant find a way to fix this so I basically cant use my Verizon Iphone 4 because it wont connect on an old version...

    OK.  You may have to reinstall everything from scratch but follow following steps:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

  • When I try to activate my cs 3 premium production, I get a message saying NO CONNECTION. Everything is in order though. How can I get an activatioon number other then trough the web??

    When I try to activate my cs 3 premium production, I get a message saying NO CONNECTION. Everything is in order though. How can I get an activatioon number other then trough the web??

    Sign in, activation, or connection errors | CS5.5 and later, Acrobat DC

  • When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.

    When I try to scan a document on my MF8050cn, I get a "Connect Computer" error.  I am running Windows 8.  My device is directly connected to the computer.  I can print from the computer to the printer without issue.  I get this error when using the controls on the device. 
    If I try to use the MF Toolbox - Scan Function controls, I get the following error message: "This action cannot be completed because the other program is busy.  Choose 'Switch To' to activate the busy program and correct the problem."  When I click "Switch To", it brings me to the Windows 8 tiles screen but does not resolve the issue.
    Please help!

    Hi h_rankin.
    I recommend uninstalling and reinstalling the drivers and software.  Please follow the steps below to perform the operation:
    1.  Unplug the USB cable from the printer.
     2.  Press the Windows key and 'x'.
     3.  Select 'Control Panel'.
     4.  Select Devices and Printers.  The Devices and Printers window opens.
     5.  In the Devices and Printers window, right click on the MF8000 Series and select 'Remove' to delete the printer.  Delete all of the icons for the MF8050Cn.
     6.  Close the Devices and Printers window then press the Windows key and 'x'.
     7.  Select 'Control Panel'.
     8.  Select 'Programs and Features'.
     9.  Double click on driver to uninstall.  Follow the on screen prompts.  Repeat to uninstall the MF Tool box.
    10.  Restart you computer.
    Once your computer restarts, please follow these steps to download and install the drivers and the MF Toolbox from Canon's web site:
     1.  Visit our web site at: http://www.usa.canon.com.
     2.  After clicking SUPPORT & DRIVERS in the top right corner, select your model in the following manner:
         a.  From the first menu, select CONSUMER & HOME OFFICE.
         b.  From the second menu, select PRINTERS & MULTIFUNCTION.
         c.  From the third menu, select your series, IMAGECLASS SERIES.
         d.  From the fourth menu, click DRIVERS & SOFTWARE under imageCLASS MF8050Cn.
     3.  Click the drop-down arrow and change the operating system to Windows 8 (x64).
     4.  Click on 'DRIVERS', then click on [Windows 64bit] imageCLASS MF8050Cn MF Drivers file. 
     5.  Click on I Agree - Begin Download on the next page.
     6.  When the Save As box comes up, choose Desktop and click Save. 
     7.  Once the download is complete, click on 'I Decline- Go Back' and you will return to the previous page.
     8.  Click on 'SOFTWARE', then click on the [Windows 32bit & 64bit] Tool Box Ver.4.9.1 file.
     9.  Click on I Agree - Begin Download on the next page.
    10.  When the Save As box comes up, choose Desktop and click Save. 
    11.  Once the download is complete, close all windows.
    12.  Double click the [ToolBox_4911mf16_Win_EN.exe ] file on the Desktop.  Follow the prompts to install the MF Toolbox.
    13.  Double click the [MF8050Cn_MFDrivers_W64_us_EN_2.exe] files to decompress them.  A new folder will be created on the Desktop.  The new folder has the same name as the decompressed file.  Double-click the decompressed Setup.exe file to start installation.
    14.  Once that window goes away, connect the USB cable from the MF8050Cn to the computer.  Installation will complete.
    Wait a few minutes then scan a document using the MF Toolbox.
    If you still experience any errors, or need any further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666). 
    Have a good day.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password"  and my AppleID and password do not work

    My computer is authorized, but when I try to open a recently downloaded audio file I get asked for my "Audible username and password"  and my AppleID and password do not work.

    thats because audible isnt apple provided, its a third party app/website so you'll have to get it from them

  • When I try to install flash player on my mac, I get to the panel that asks for my name and password, and it will not take my password.  tried changing to a new password and same result

    When I try to install flash player on my Mac, I get to the panel that asks for my name and password, but it will not take my password.  Tried changing the password, but same result.  Suggestions??

    This password prompt is presented by your operating system, and is intended to keep you from accidentally installing software.
    If this is your personal machine and you don't need a password to log into the computer when it first starts up, you can probably leave the password blank and click OK to get past this prompt.  If this is your personal machine and your normal password isn't working, check to make sure that CAPS LOCK is off, and type the password carefully.
    If this is your work machine and it's asking for an Administrator password, well, you'll need to have a conversation with your friendly IT person.

  • I am trying to install a new theme but FF is preventing me from doing so even when I click 'Allow'

    I am trying to install a new theme but FF is preventing me from doing so even when I click 'Allow'. Might someone help?
    Thank you,
    Leeflea

    Do you mean this?
    *Firefox/Tools > Options > Advanced > General : Accessibility : [ ] "Warn me when web sites try to redirect or reload the page"
    The setting in "Tools > Options > Advanced > General" is meant as an accessibility feature, as you can see by the label of that section, so that people with disabilities or people who use screen readers do not get confused and is not meant as a safety protection to stop redirecting.
    See also:
    *https://support.mozilla.org/kb/settings-network-updates-and-encryption#w_general-tab
    *http://kb.mozillazine.org/accessibility.blockautorefresh
    *http://kb.mozillazine.org/Accessibility_features_of_Firefox

  • Itunes stops working when i try to watch movies

    When I try to watch videos or movies through ITUNES it immediatly stops working, and shuts Itunes down.

    Try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • ITunes keeps crashing when I try to watch movies

    Since the latest iTunes & Quicktime update, I am unable to watch any of the movies I have downloaded on iTunes. I've completely deleted both iTunes and Quicktime and reinstalled the latest versions of both. When I click to play a video, the movie will not play and I get an error dialogue box that indicates iTunes has stopped working - windows isn't able to detect an error.
    I've contacted iTunes/Apple support and they tell me it's a system issue, but there aren't any other problems with my computer.  I'm running Windows 7 Ultimate.  Any ideas or suggestions would be really helpful!
    Thanks

    Let's try the following user tip:
    iTunes for Windows 10.7.0.21: "iTunes has stopped working" error messages when playing videos, video podcasts, movies and TV shows

  • TV Out display shows when I try to watch movies on my iPod?

    I used an 80GB classic, brand new. Though I'm not connected to any output device aside from my earbuds, whenever I try to play a movie, any movie, on my iPod it displays "TV Out Enabled -- Please Connect Video Accessory." Obviously I don't want to go out and buy a tool to watch videos on an iPod that should be able to play them; what exactly is going on and how do I DISABLE TV Out?

    how do I DISABLE TV Out?
    Main menu/videos/settings/tv out/off.

  • When i try to use icloud i get a message check your email for instructions to verify account. I do not have any such message in my email. What do i do

    when i try to use icloud on my ipad i get a message to log onto email for instructions to verify account. However when i look at my email i have no such messahe. When i check my icloud on my mac it sais i am verified. What do i do

    How old is your battery? This weird trackpad action was the same thing that happened to me when my 3 year old battery started to swell. As it swelled it pressed up on the trackpad and caused all sorts of almost ghost like mouse pointer movements...many all on it's own. The battery itself still held a charge.
    I took the battery out and could barely see where it had swelled. I then ran my MacBook Pro with battery out on the MagSafe adapter. No more ghost mouse pointer movements, resizing, dragging, and clicking.
    If you can remove the battery DIY, try what I did.
    I installed a new battery and everything is back to normal.

  • I have obsolete computers attached to my appleid when I try to add the new computers to my itunes store and purchases to keep all data updated and together....and not have to repurchase.  I had a fire...thus, old computers are gone and I cannot unauthoriz

    I have obsolete computers and devices attached to my appleid.  I cannot deauthorize them as they are gone!!!  (Had a fire and had to replace all tech systems)  Because I spent alot of monies on my purchases, it would be nice to be able to combine all these items and not have to repurchase them.  How can I update the current number of computers and correct ipods, ipads and iphones together; and get rid of all old computers and ipods, iphones that are authorized under the appleid I have always used.  I have asked this question before, but received no support or answers.  I do have icloud and mobileme, but cant sychonize them either. 
       I am also seriously considering purchasing a mac, and no longer using the windows pc\s as too many tech difficulties arise when I tackle complicated projects regarding DVD and moving making.  However, I still require pc software for my work.  Will my current backup network system convert easily?  Can it be converted?  Will I require a tech and if so, how much will this cost?  I have recently invested a large sum into creating a network and backup system that has yet to be working as it should.  Unfortuneately it has left me with very little left to try to convert to the mac systems entirely.  Please answer my questions in a language that I can understand.....as this problem is affecting my household, organization and office techniques.  Would like to take care of this problem once and for all.  Mac seems to work with my creative desires much better.  Will await your response.....Thank you.

    If you no longer have the computer(s) you want to deauthorise,
    Log in to iTunes,  go to "view your account info" on the itunes store,  deauthorise all five, (Please Note: this can only be done Once every 12 months)  and then re-authorize your current Computer(s) one at a time.
    Authorise / Deauthorise About
    http://support.apple.com/kb/HT1420

  • When I try to view the Photos tab on Facebook, I get a pop-up error message.

    When I click on the Photos tab on Facebook, I get a pop-up error message, telling me to try again.
    == URL of affected sites ==
    http://facebook.com

    Troubleshooting extensions and themes
    * https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
    Check and tell if its working.

  • When I try to download 3.6 my iexplore steps in with an APPCRASH and it prevents me from completing the task. What can I do?

    I am attempting to be a member of GOG (Good Old Games). These people facillitate users who have a Windows 7, 64-bit os. Many of the old games can't function outside an XP environment. Internet Explorer has a problem with APPCRASH. I have been following it on line and many people have the same problems. The people from GOG told me to try another system ,(yours) and that is where I am.

    the original apple id was entered incorrectly. Apple says it must be a email address.  My email address is correct but the letter ( t ) somehow got added to the (.com) so that when i try to enter my id it is automaticly loaded with the email address the ends ( .comt ) . According to Apple this is not a "legal" email id.  But it appears on my dropdown in gray and i cannot alter it or delete it, thus preventing me from downloading software updates.

Maybe you are looking for

  • Judder using Mplayer... maybe force different resolution/refresh rate?

    Hi! (I posted this in the newbie section too, but this is maybe the most appropriate place??) I've set up my computer as a media center using Freevo. As the main media player in Freevo I use Mplayer. The setup is working beautifully, but I'm getting

  • R/3 Table Name.

    Hi All, I have a list of say 600 field names along with their table names. (eg MARA table & BUKRS field) Now, i want to have the technical propertires of all those fields in the R/3 (only the data type and the length). So, is there any way out for de

  • It unes keeps reverting to old email adddress

    Hi I have recently updated my e mail address and changed my I tunes account to the new address but every time I log on the MAC presents the original account details and I have to manually change the e mail. Also it keeps brininging up the start up tu

  • Mass Receipt Printing (T-Code FPREPTM) - To be tracked in CORRHIST??

    Hi Experts, For Mass Receipt Printing(T-Code FPREPTM), with a specific BP/CO/CA, after the button 'Schedule Program run' is pressed, we need to create an entry in Transaction CORRHIST. Can anyone please suggest how this could be achieve? Thanks a lot

  • Trying to download Indesign cs6 trial

    The download assistant say tha the file size is 879mb, but so far the file that has been down loaded is over 1.5g and does not show any signs of installing. Any ideas?