When i turn my i Book G4 laptop on, It just shows a tiny folder with a ?
When I turn my i book G4 laptop on, it just shows a tiny folder with a ? & a face. What can I do to fix this problem?
Hello,
This would indelicate a fault with the Hard Drive, either it is not working or the iBook does not have any OS installed. You will need the original system disks that was supplied with the iBook. If you have an Apple Hardware test disk, use that to check the condition of your hard drive. If the hard drive is fine, use the gray system disk to restore the OS on your iBook.
If you don't have the original gray system disk, then use a retail copy of Mac OS X 10.4 Tiger or Mac OS X 10.5 Leopard. These can be obtained on some vendors web sites online or alternatively eBay.
Similar Messages
-
why is a world icon appearing when i turn my mac book on instead of the apple icon, is this some kind of calling or what i need to know noww
Just FYI for future questions, this is the Mac Pro forum. The MacBook forum can be found here:
MacBook
Regards. -
when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you
hi
... i have a similar problem
but just with the sleep botton.
fist use your adapter with other iphone/itouch ... is posible itś the problem
second .. let your phone charging
...normally if we conect our phone ... after some minuts it's put on.
after 2 hours ... trate to use it ... if after it your phone continue same... could be qaa electrical/physic problem
please if you have a guaranty use it.
im sorry but my english is terrible. -
Please help. Like I said when I go to see the picture it just shows a black screen with the little camwow logo in the bottom right corner. I already tried turning it off and turning it back on, and I already tryed reseting it. PLEASE HELP PLEASEEEEEEEEEEEEEE imma cry.
I've tried that.. twice. It didn't work for me - any other suggestions?
-
Version 5.0 on a MAC will not let me switch between tabs. I can open a new tab, but when I try to go to a different tab, it just shows me the contents of the tab most recently opened. Help!
Also, pop up blocker works for some time and then just stops working. I have to close and restart Firefox to get it to work again. Help!I had the same problem, but with Firefox 4.0. My first thought was to update Firefox (after of course restarting FF), but that didn't help it and I had the same problem.
Among others, I had an extension installed and enabled called Tile Tabs 4.10 that I thought could feasibly creating this problem. So I went into my add-ons manager and disabled it, restarted Firefox and the tabs worked properly again. Unfortunately, the Tile Tabs extension is my favorite Firefox add-on and I use it almost every day for managing my web work tasks. I went to the add-on page for Tile Tabs and saw that there was a notice that version 4.10 didn't work properly on Mac OS, and to install version 4.9 of the extension. I saw they had a new, not-yet-reviewed version 4.11 that addressed the Mac OS problem, installed it, and everything seems to be working properly.
I have no idea why all of a sudden I had this problem, as I hadn't updated Firefox or the Tile Tabs extension recently. Also, obviously this might not address your problem, especially if you don't have that add-on installed and enabled. But our problem started at the same time for both of us it appears based on your post time, so its probably not coincidence.
But its worth a look, and you might want to check out other extensions if you don't have Tile Tabs that could be causing the problem. -
I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?
Did you move any system files? It's looking for the system folder. You can startup from the system CD by inserting the CD and restarting the computer and at the same time hold down the C key. The computer will boot from the CD. At that point run the disk utility and check your hard-drive. It the problem persists then do a fresh clean install of the system folder and that should help you get back on track.
Good Luck. -
I ipod classic 80 gb when I am connected pc connected after that is hanged just showing connected its not working any button .
Try connecting it to another PC, if it is ok, then your PC has some software conflict with iTunes.
If it hangs other PC also, then your iPod Hardisk, maybe bad.
Do the disk diagnosticas posted earlier by tt2, to check the health of your Hardisk.
Have a nice day! -
when i charged my iphone on y pc after some time showing charger not supported with this accessory what have to do to solve it
If you did not do a reset of your iPod please try that (you will not lose any data)
Reset iPod touch: Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required). -
My Intel iMac only shows a blinking folder with a question mark when powered up.
I did run the hardware test of the original installer disc and no trouble was found and I am out of options. Does anybody have any advice what to do nextIf the drive shows errors then repair, if after the 3rd pass of Repair Disk in Disk Utility it still shows errors it's telling you it's time to be replaced. Take it to your local Apple Store or AASP for repair, when it comes back use your backup (either Time Machine or bootable clone) to restore so you can pick up where you left off.
-
When I turn my mac book pro on the screen goes blue
Hi when I have had my mac book pro for well almost a year now and for some odd reason twice now when I turn on the computer the screen goes blue and will not go to the desk top....please advice
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
-
Message I get when I turn on mac book pro.10.10.4 What does this mean?
"""distutils.pypircProvides the PyPIRCCommand class, the base class for the command classes
that uses .pypirc in the distutils.command package.
import os
import sys
from ConfigParser import ConfigParserfrom distutils.cmd import CommandDEFAULT_PYPIRC = """\
[distutils]
index-servers =
pypi[pypi]
username:%s
password:%s
"""class PyPIRCCommand(Command):
"""Base command that knows how to handle the .pypirc file
DEFAULT_REPOSITORY = 'http://pypi.python.org/pypi'
DEFAULT_REALM = 'pypi'
repository = None
realm = Noneuser_options = [
('repository=', 'r',
"url of repository [default: %s]" % \
DEFAULT_REPOSITORY),
('show-response', None,
'display full response text from server')]boolean_options = ['show-response']def _get_rc_file(self):
"""Returns rc file path."""
return os.path.join(os.path.expanduser('~'), '.pypirc')def _store_pypirc(self, username, password):
"""Creates a default .pypirc file."""
rc = self._get_rc_file()
with os.fdopen(os.open(rc, os.O_CREAT | os.O_WRONLY, 0600), 'w') as fp:
fp.write(DEFAULT_PYPIRC % (username, password))def _read_pypirc(self):
"""Reads the .pypirc file."""
rc = self._get_rc_file()
if os.path.exists(rc):
self.announce('Using PyPI login from %s' % rc)
repository = self.repository or self.DEFAULT_REPOSITORY
realm = self.realm or self.DEFAULT_REALMconfig = ConfigParser()
config.read(rc)
sections = config.sections()
if 'distutils' in sections:
# let's get the list of servers
index_servers = config.get('distutils', 'index-servers')
_servers = [server.strip() for server in
index_servers.split('\n')
if server.strip() != '']
if _servers == []:
# nothing set, let's try to get the default pypi
if 'pypi' in sections:
_servers = ['pypi']
else:
# the file is not properly defined, returning
# an empty dict
return {}
for server in _servers:
current = {'server': server}
current['username'] = config.get(server, 'username')
current['password'] = config.get(server, 'password')# optional params
for key, default in (('repository',
self.DEFAULT_REPOSITORY),
('realm', self.DEFAULT_REALM)):
if config.has_option(server, key):
current[key] = config.get(server, key)
else:
current[key] = default
if (current['server'] == repository or
current['repository'] == repository):
return current
elif 'server-login' in sections:
# old format
server = 'server-login'
if config.has_option(server, 'repository'):
repository = config.get(server, 'repository')
else:
repository = self.DEFAULT_REPOSITORY
return {'username': config.get(server, 'username'),
'password': config.get(server, 'password'),
'repository': repository,
'server': server,
'realm': self.DEFAULT_REALM}return {}def initialize_options(self):
"""Initialize options."""
self.repository = None
self.realm = None
self.show_response = 0def finalize_options(self):
"""Finalizes options."""
if self.repository is None:
self.repository = self.DEFAULT_REPOSITORY
if self.realm is None:
self.realm = self.DEFAULT_REALMHi MrConnors
Honestly, I'm not sure what could be causing this. It looks like a python error of some sort. You said you get this when you turn on your Macbook, can you tell me anything else? Like what application do you see the error in? Maybe you can provide a screen shot?
-
It's just a white screen with the apple logo. It doesn't move from this screen regardless of how long it's on. The charger is showing a green light. It was amber before I let it fully charge. I've tried turning it on with and without it plugged in. I hear the hard drive start up when I turn it on. And the caps lock light turns on when I hit it. Any suggestions? Help please.
Start your MBP holding the OPTION key. This should show two HDD icons. Select the one on the right, the RECOVER icon. This should display a four option menu. Select Disk Utility and repair the disk.
If no success, the the only other avenue is is a reinstall of the OS.
Ciao. -
I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
Is this a back door? Security hole?
The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
What is the problem?I have my all networks at 'Off' status in the system panel, never use Bluetooth either, also in the top status bar, and set as 'require admin password to turn on and off WiFi', but when I turn on my MacBookPro 15" retina newest model only one month old, it goes on to WiFi automatically by itself.
Is this a back door? Security hole?
The other day, I was taking a break for five minutes, when I came back, the Microsoft outlook is open for setting up an account, I never use outlook, it is there only because it comes with the office package. Also, iTunes was playing music, I don't use iTunes when I'm working. Both were not on before I left for the break.
What is the problem? -
When i turn my ipod touch on it stays at a white screen whats wrong with it anyone
when i turn my ipod touch on the screen stays white what is the problem
That symptom is covered here:
iPod touch: Hardware troubleshooting -
Error when importing .csv into Address Book. Address,Street etc doesnt show
Can anyone help me?
I saved my excel contact list to either Tab Delimeted .txt or .csv file. Then when i import in Address book as Test file, it does not import the address. And when i click on the tabs to import, it keeps loading and hang.
Even if i dont import the address line, those underlined were not shown even though detected.
My columns are:
First / Last / Job Title / Company / Address / Street / City / _*Postal Code*_ / Country / State / Phone / Work / Phone FaxAre you trying to import from within the AB application, menubar File > Import > VCards? If so, what happens if, in Finder, you just double-click on the VCF file?
Maybe you are looking for
-
Error message for Adobe Photoshop CS2
I keep getting an error message when I try to install Adobe Photoshop CS2 (free download from the website with the key). I have a MAC.
-
How can I get SQL Developer working on Windows 7 64-bit
Hi all, I've followed the download instructions for SQL Developer v4 as per the download page ( http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/sqldev-download-v4-1925679.html Install instructions: http://www.oracle.com/tech
-
Cannot open my e-mails now on NetZero with Forefox. O.K. with MS IE!
Since the latest Firefox upgrade, I have been unable to open my e-mails on NetZero.com. There are 4 "spots" where I can click to get my e-mails. None of those now work with Firefox. It works fine if I am on Internet Explorer. Another new Problem: Whe
-
I'm currently trying to compile MySQL-python-1.2.2 on solaris 10/08, but am getting the following error: bash-3.00# python setup.py build running build running build_py copying MySQLdb/release.py -> build/lib.solaris-2.10-i86pc-2.4/MySQLdb running bu
-
Hi I have written a small application that can post files via a http request. It all works fine. But now i would like to monitor the progress of this fileupload. How do i do this. I have tried using all sorts of outputstreams but i can only seem to g