When i turn my i pod on my security code screen does not appear. since my i pod is locked i cannot get into it. help. what does appear is a pic of a usb cord and the i tunes logo...
i need help getting into my i pod touch. when i turn it on a picture of a usb plug pointing to a cd and music sign that says i tunes appears. so i did that...after plugging up to i tunes, i tunes says it cant get into my i pod cause its locked. i cannot put in my code to the i pod cause the only thing appearing on screen is the afore mentioned pic of usb plug and i tunes logo....help
- See if this program will place the iPod in recovery mode:
http://jaxov.com/2010/05/recboot-iphone-recovery-mode/
- Next I would try placing the iPod in DFU mode:
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Similar Messages
-
When I attempted to plug my iPod touch into my PC to sync with iTunes it said an update was needed so I clicked ok. Now all I get is a screen that shows a pic of a USB cord with an arrow and an iTunes symbol, I can't even shut it off, I pushed the home and power button at same time which logs off but pops right back with same screen....I've tried to reset from iTunes it retrieves info then goes into attempting to download the info back but a message comes up and says its unable to reset it, can anyone help me with this problem??
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software
Just what was the wording of the error message? -
i tried to reset my ipod 1st gen and its stuck on the screen where it has a pic of a usb cord and the itunes logo what do i do???????
Connect the iPod to your computer and restore via iTunes
iTunes: Restoring iOS software -
Today I was updating my phone to the newest IOS 7 and after it finished downloading. An error showed up on my screen telling me it was unable to update. So I decided to just unplug my phone and maybe do it later but on my screen I have a USB cord and the iTunes logo asking me to connect. So I hooked it back up and still at this point my iTunes will not connect and when I unplug the phone the screen stays the same. I have tried turning off the phone and restarting and both times the screen goes back to the connect screen.. How can I fix this?
I have tried the steps to fix it but no solution! Please someone tell me what to do!
-
my ipod is a older generation...when i turn it on the screen popps up with a usb cord and the itunes logo.which i assume means it needs to be linked...my issue it wont link
What happens when yo connect to computer and restore via iTunes
iTunes: Restoring iOS software -
I Turn on my Ipad and all it will do is show a usb cord and the Itunes logo and it won't go away
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
My phone is only showing a USB cord and the itunes thing. On my computer under itunes its not letting me do any thing there is not a reset button or anything it just says my information about my phone, i cant even reset it.
Make sure that you can see this iTunes cord graphics before you connect it to your computer.
On the left sidebar of iTunes, under My Devices, you will see there your iPhone's name.
Click on that and on the screen that will appear, you will be able to see RESTORE. -
my ipod is workingfine till i plugged it into the computer and the i tunes logo stays on . wan t to open and go back to regular setting .how could i do it?
Sounds like you are in recovery mode. Try using RecBoot to kick it out of recovery. If that does not work, you may need to restore.
Basic troubleshooting steps
17" 2.2GHz i7 Quad-Core MacBook Pro 8G RAM 750G HD + OCZ Vertex 3 SSD Boot HD
Got problems with your Apple iDevice-like iPhone, iPad or iPod touch? Try Troubleshooting 101
In Memory of Steve Jobs -
my iphone5 is stuck at the i tunes logo whenever i try to restore it the iphone reboots at the waiting for iphone stage and the i tunes logo appears againe
Water damage is really a tough hurdle to get over if the steps you have already tried do not work.
The next step would be to tranfer your Logic Board to a working 3GS to see if it works.
If the Logic Board is good or you just want to try one more thing, try cleaning the Dock Port very well with Isopropyll Alcohol. If still problem, at most replace the Dock Port Assembly.
Throwing good money after a bad iPhone is not a good idea. -
On the opening screen of my 1pad2 the itunes apple icon and usb cord are displayed. How do I delete them? Do NOT tell me to download anything, as I CANNOT GET INTO THE IPAD.
You can't get rid of those icons because that means that you MUST connect the iPad to your computer's iTunes and restore the device. You have no choice. There is no way to remove that from the screen. Something went wrong on the iPad and you need to restore it now.
iTunes: Restoring iOS software -
HT201210 my phone a pic of a usb cord and it say connect to itunes what do i do
my phone keep showinga usb cord and saying connect to itunes what do that mean
It means you should connect the phone to iTunes on your computer. The phone has detected data corruption on the phone, so you need to restore it using iTunes.
-
My daughter has forgotten her passcode and cannot get into phone, what do i do?
iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
-
Just updated tiger and now cannot get into Computer-HELP!!
Was having issues with iPhoto and importing images. Would get the darkened screen telling me I needed to do a hard restart on the machine. Happened a couple of times, so fixed permissions to start and then ran a system update.
Now, when I restart I get the password login screen (had automatic login enabled previously). The passwords for both accounts do not work and I know I'm typing them in properly. When I try to boot up of the CD to either reset the password or run disc utility, I get a DOS screen with words such as:
Unable to find finder driver for this platform
panic (CPU 0 caller
no debugger configured
panic: we are hanging here
Has anyone else had access issues since running the latest Tiger updates?I'd imagine because of the fact that you had a hard drive problem and the system update touches system files... if they aren't written back correctly this could cause a huge problem.
-
I don't know what to do
You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(101149) -
HT1430 I cannot get into my iphone to do a reset I am trying to reset it through the itunes app
I would like to know how to reset my iphone 4 using the itunes app?
You don't reset your phone using the itunes app.
A reset is holding down the home/sleep button together until you see the apple logo and then release, then wait for the phone to boot back up.
A restore can be done directly on your phone or connecting your phone to your computer open itunes and select restore.
To restore your phone to factory settings directly on your phone go to settings - general - reset -erase all contents and settings.
Maybe you are looking for
-
Hi, I'm new to lion. I tried to manipulate the guest user account so it would function as a guest user (deleting all the private stuff after log out) but keeping my preferences like dock, desktop, grid settings, ... I used this link: http://www.micha
-
WMTA output type for delivery note.
hey experts we are using output type WMTA (automatic TA) for delivery note with Medium 8 (Special Function) & date/time 4 (send immdiately when saving appli). In production server when user save delivery WMTA trigger with ZPLF(std delivery outpt ty
-
2500 series support mobility groups?
Do you know if the new 2500 series controller supports things like mobility groups? Could I use 2 of these and do inter-controller roaming. Also do you know if this would work with a 2106 controller and a 2505 controller or are they 2 completely ind
-
University Cost Center structure
Hello all, At the university I am working for here is what there Cost Center naming convention appears: They use all 10 digits and this is how it is broken down--- XXX XX XX XXX Colleg
-
Purpose of field finncpriod when updating journal entries by DI API
Hello, I have to update the project code within the journal entries on line basis. For this reason I use following code (DI API): public static void UpdateOjdtJdt1() SAPbobsCOM.JournalEntries oJE; SAPbobsCOM.Recordset oRS; string s; int i,j; oJE = ((