When i turn my imac on it displays a circle with a line thru it why
When I turn my imac on it displays a circle with a line going threw it and says its loading but nothing appears on the screen. What should I do?
If your data isn't backed up, get one of these tools to see if it can recover data from your drive to an external hard drive at least as large as your internal:
https://discussions.apple.com/docs/DOC-1689
If your data is backed up, and you are running 10.7 or later, boot with command-R.
If your data is backed up, and you are running 10.6.8 or earlier, find the disk that either shipped with the Mac if it is matching
the system you are running, but just an earlier version, (i.e. 10.6.8 users can use the 10.6.x bundled installer from the same Mac),
or the retail installer that installed the operating system on the Mac.
And select the Utilities menu after selecting the language, and select Disk Utility.
From there select First Aid.
And then see if the hard drive is selectable.
If it is, Repair Disk. If it isn't, or Repair Disk is not able to repair it, go to the store and purchase Alsoft Disk Warrior. It may be able to make your machine bootable again.
If it can't, you may have to replace the hard drive.
Similar Messages
-
I'm trying to load updated Firefox 4, when the blue drop down menu with the firefox icon and Applications folder icon (prompt to drag firefox icon to apps folder) the firefox icon has a white circle with a line through (like a "do not enter" symbol)
Hello puma1552,
Are you referring to the *Do Not Disconnect* screen display while your iPod is plugged into and syncing with iTunes? Check out this Apple support document for its meaning and why you are receiving this icon. This icon always appears when you are syncing your iPod with iTunes. It's basically a warning message telling you that the iPod is currently in use and should not be removed.
http://support.apple.com/kb/HT1378
B-rock -
My iPhone five decided to go crazy and give me a white screen with black stripes and I can't get into my phone. I can only use Siri! What's happening?
You posted in the iPad forum instead of the iPhone forum. To get answers to your question, next time post in the proper forum. See https://discussions.apple.com/index.jspa I'll request that Apple relocate your post.
Cheers, Tom -
I hope someone can help me with the above question about using a porable speaker for awhile and then being unable to have sound on my computer after I remove the speaker. I don't know how to recover the sound unless I turn off the computer...and this is frustrating when I'm receiving a Skype call ( we live overseas and receive callls fairly often). Thanks for any help on this problem. It just started a week or so ago though I've been streming TV with this speaker for several months without the problem.
Have you tried a PRAM reset?
http://support.apple.com/kb/HT1379
Ciao. -
When I go to the Firefox website it says that unfortunately the latest version of Firefox is not compatible with my computer's operating system. How can I get an older compatible version?
* Download a new copy of the Firefox program: http://www.mozilla.com/firefox/all.html
* Trash the current Firefox application to do a clean (re)install.
* Install the new version that you have downloaded.
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data. -
If I have my iMac internet sharing turned on, the Airport Utility won't recognize the Airport Express I want to use to stream iTunes to my stereo. When I turn the iMac internet sharing off, the Airport Express appears but calls itself a base station. I just bought the Airport Express and it's not clear how I should set up my System Preferences for Sharing. Thx
Yes. Unfortunately the stereo is too far from the wired ethernet connection My iMac is connected to the internet using an ethernet cable from the DSL modem (plugged into the wall, not wireless). The Airport Express is plugged into an outlet 25' away from the iMac and connected to my speakers. I've turned on the iMac Airport wireless Internet Sharing, hoping to stream iTunes to the Express connected to the stereo. The iMac Airport picks up several neighborhood networks so I know it's working (and I connected my iPhone wifi to it just to check as well).
When I use Airport Utility to set up the Express, the only time Utility recognizes the Express is when the iMac Airport is off. When I turn on the iMac Airport, the Airport Utility immediately loses the Express and asks to rescan.
Maybe that explains my problem better. -
My mac book pro wont start only the fan starts running when i turn it on but no display is shown on the screen
Have you tried this yet?
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support -
Hi I installed a new hard drive in my Mac mini osx lion an when I turn it on I get a flashing file with a question mark. I tried holding command and R keys when turning it on but the recovery fails to work. I can hold the option key at start up and choose my network, then Internet recovery shows up with an arrow pointing up. When I click on the arrow Internet recovery fails and all I get is a globe with a triangle on it with an exclamation mark on it, and under that it says
apple.com/support
-6002F
Does any one know how I can fix this without a recovery disc? ThanksI just want to add to this, in case someone else searches for this error on Apple Support (google doesnt cover apple support.. how clever is that?)
I had the same error. And i had a Computer that had worked, with a SSD drive and 16GB upgrade done by the owner himself.
I tried swapping with a Mechinal Harddrive, no luck.
Kept the Mechanical drive in, and tried with some other Ram, it worked..
So for me this error and after reading the other responses can be boiled down to a Harddrive problem or Ram issue.
It was Ram for me.. -
I have a white MacBook and I just changed out the hard drive with a 500GB. When I turn it on I get a file fold with a ? In the middle that flashes. What do I do next?
Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
when i turn my iphone 4 on, it comes up with a picture of a cord connecting to an itunes icon. when i plug it into my pc, it says the settings on my iphone need to be restored. but i dont want to restore it as will lose everything on it. what shall i do?
You have no chose but to restore your phone. What do you mean "lose everything"? Is your data/iTunes content not on your computer?
-
I have the mac book air and when I turn it on its a light blue screen with a flashing folder with question mark on it. Any one know how to get past it?
The MBA is trying to tell you that it is not able to find a bootable system
Either the file is corrupt or access to the storrage has failed
I would start by seeing if it will boot with Command + R depressed -
When I use my iMac (os x 10.6.8) with iTunes (11.0.01) to sync my iPod and ipad all of the selected viedos are installed on the iPod touch and only one or two are install on my iPad (model MD513LL/A)? With the same selections???
Has no one seen this anomaly, all of the videos are mp4's mostlly frokm U-tube.?
-
When I start my iMac 2008, appear something like folder with question mark inside
When I start my iMac 2008, appear something like folder with question mark inside
Reinstall OS X without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
If you are running Lion or later:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
When I try to turn on my Mac it has the apple symbol that later turns into a circle with a line through it and it won't turn on I need help.
Go step by step and test.
Restart.
http://support.apple.com/kb/ts2570
Startup in Safe mode
http://support.apple.com/kb/PH14204?viewlocale=en_US
Repair Disk
Steps 1 through 7
http://support.apple.com/kb/PH5836
Reset PRAM: http://support.apple.com/kb/ph14222
Reinstall OS X
http://support.apple.com/kb/PH13871 -
I upgraded the OS on my iMac to Lion from the App store; and after installation, it restarted and now the operating system won't start up.... it keeps displaying the apple/folder with a question mark and a circle with a line through it! Please help!
Try starting up with your Snow Leopard DVD and see if the disk can be repaired. Once you are at the installer screen go to the Utilities Menu and choose Disk Utility and choose repair disk. You might also want to try Diskwarrior.
Hope this helps.
Ben
Maybe you are looking for
-
Display the status of parallel human tasks in ADF web page (BPM 11g)
Hi, We create a BPMN process (BPM 11g) which splits into parallel branches. Each branch has its own user activity. We want to show the task status of ALL the parallel user activities (running or completed) in the ADF web page implemented for the user
-
I'm using generated JCLoginDialog for JDBC connection in JClient application. I followed all instructions from help (modified getInfo() and bc4j.xcfg) and get problem that login dialog appears three times. I insert correct usr/psw, than press OK ever
-
OMF Export issue in Premiere CS6
Hello, I am trying to export a feature length OMF file for my sound mixer. I have the tracks I want on and selected. I then do File - Export - OMF. I do encapsulated audio, with 60 frame handles. I then start the export. I encodes through the files t
-
Append two files with added time stamp
Hi experts,' MY Requirement is I need to pick two files from two different FTP Locations and append them to file receiver FTP Location with Added timestamp. How to achive this as with append we do not get option of adding time stamp. Other thing is I
-
Mapping Copied SyncBO to MAM application
Hi all I want to add some extra fields to the MAM25_030 SyncBO.Please tell me if the following procedure is correct or do we have some other simpler method. 1) Make a copy of the MAM25_030 SyncBO. 2) Make the extra column mappings. 3) In the MAM appl