WHEN I TURN MY MACBOOK ON, IT STAYS ON THE  GREY SCREEN. PLEASE HELP~

it just stays on the grey screen forever and it wont actually turn on or load anything. PLEASE HELP.
Message was edited by: Mcnugget9949

Try this on your internal drive. Using Disk Utility to verify or repair disks.
You also might try to reset the SMC and/or PRAM.

Similar Messages

  • TS2570 when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

    Hi , and a warm welcome to the forums!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If 10.7.0 or later...
    Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
    Hold alt or option key at bootup, do asny boot choices show up?

  • My MacBook won't boot past the grey screen.. help!

    Today I was having a problem with Safari. For some reason, it kept restarting. This annoyed me, so I restarted my MacBook. Unfortunately, it won't boot past the grey screen, with the thing spinning in the middle. I've been into disk utility and it says my HDD is fine. I restarted from this, and yet it still won't boot. Can anyone suggest what's wrong/what to do?
    Thanks in advance

    Retrieving data using Target Disk Mode:
    1) Shut down both computers
    2) Connect the two computers using a Firewire cable
    3) Start up the working computer.
    4) Once the working computer is ready, startup your MacBook with the T key held down.
    5) Your MacBook's hard drive should appear as an external hard drive on the working Mac. Drag & drop any files you want to save.
    ~Lyssa

  • I have a MacBook pro. When I turn it on all I get is a grey screen with a small grey spinning thing under the apple. What can I do?

    I cannot turn on my MacBook pro. When I turn it on all I get is a grey screen with a grey spinning thing under the apple. Can anyone help?

    Reinstall OS X.
    Reinstall Snow Leopard without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    ====================================
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.

    Can someone please help with my issue listed - My ipod 4G wont go past the apple logo when I turn it on - it will stay on the apple logo for few min, then blanks out and back to the apple logo.  Tried reset option/troubleshoot several times.  Also wont show up on computer at all when I plug in to USB.
    Any tips are very much appreciated.

    Place the iPod Touch into DFU mode.  This will be similar to what the factory would do to install the iOS onto new iOS devices.
    Placing it into DFU mode will allow you to "format" and install the current iOS for that device.
    To place your iOS device into DFU mode.
    First connect you iOS device to you computer.
    Open iTunes if not already open
    Now turn off your iOS device using the power swipe.
    Press the home and sleep button on your iOS device for 10 seconds.
    Release the sleep button but carry on holding down the home button.  For another 10 seconds.
    Your iOS device should now be on DFU.  Click on restore and iTunes will download the latest iOS for your device.
    Hopefully that sorts it if not, you will have to go to a service centre or call Apple Care up and get them to collect it and repair it. (replace it)  Or go into an Apple Store.

  • A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer.help please

    A magnet fell on my macbook "late 2007 series black" and it stopped working. When i start my macbook up it sits on the white screen. i tried inserting the snow leopard disk to do a clean install but the disk ejects and all i see is the pointer. i even bought a new hard drive to do the clean install but the same thing happens. Please Help

    Your problem is not Boot Camp, in fact, is your optical drive. Win XP requires indeed sp2, but also the internal drive, does not work from external optical drive.
    For other possible tricks, please use the appropriate Boot Camp forum, not here. Mac OS X may be installed from both external and internal optical drive and/or internal/external partition of a disk, any disk. Windows is not so generous.

  • I have a MacBookPro1,1 running mac os x 10.6.8. It keeps freezing whenever i use it, and often takes 5 or more attempts to turn on. It just stays at the grey apple screen, causing me to force shut down. Is there anyway i can fix this?

    When i am using the mac. often it will suddenly freeze, only the coloured loading wheel still moving. I will leave it for hours to unfreeze but nothing. The only remedy is to turn it off by the button. Moreover, sometimes when i turn it on it gets stuck at the grey apple screen and i have to turn it off by the button and on again. This can happen up to 10 times until it turns on! What can i do?

    Shut down your computer and disconnect all peripherals (keyboard & mouse if pertinent) from your computer.  Now reboot.
    If the Mac starts up normally, shut it down again and then plug in one of the peripherals (keyboard or mouse first) and start up your computer again.  If it does so successfully repeat the process, adding one peripheral at a time until your Mac acts up.  At that point, disconnect the last peripheral you added, reboot your Mac and search the peripheral vendor's website for an updated driver. 
    If no driver exists or the problem remain after installing the new driver, try a different cable or a different port on your Mac.
    If none of the above works, again disconnect all peripherals from your Mac, hold down the "shift" key to start up in "Safe Boot" mode. 
    If the Mac starts up correctly, restart without pressing the "shift" key.
    If your computer still does not start up properly, shut it down and restart it while holding down the Apple+Option-P-R keys; keep holding "all 4 keys" down until you hear the startup sound "twice."
    If none of the above work Disconnect all peripherals from your computer. Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
    Select your language.
    Once on the desktop, select Utility in the menu bar.
    Select Disk Utility.
    Select the disk or volume in the list of disks and volumes, and then click First Aid.
    Click Repair Disk.
    (If Disk Utility cannot repair, you will need a stronger utility (3rd party) - Diskwarrior or Techtool PRO)
    Restart your computer when done.
    Repair permissions after you reach the desktop-http://docs.info.apple.com/article.html?artnum=25751 and restart your computer.
    If you are able to reach your desktop take note of how large your hard drive is and how much hard drive space do you have left?
    Remove any 3rd party ram.
    Reinstall Snow Leopard - This will install a "fresh" copy of Snow Leopard without archiving old system files but leaves the rest of your files in place.
    If your computer is still under warranty or you have Apple Care, take full advantage of it by letting tech support deal with your problems.  It's what you're paying them for.
    Out of warranty - take the computer to an Apple store or an AASP.  Whichever is more convenient for you.

  • I didn't close my mac air down properly and when i tried to use it, the screen was frozen.  I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning.  Can you advise?

    i didn't close my mac air down properly and when i tried to use it, the screen was frozen.  I turned it off and restarted it, and the grey screen with the apple logo appear and the circle just keeps spinning.  Can you advise?

    Try resetting the SMC
    Intel-based Macs: Resetting the System Management Controller (SMC)

  • When i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ???

    when i turn on my computer it freezes in the white screen and the spinning wheel and it won't move from there ... I have turned it off and on several times and took out the battery and it keeps on doing the same thing again what can i do ??? please i need help with this and how can i fix it

    Here is some pertinent information and how-to's from Apple:
    http://support.apple.com/kb/TS2570
    Post back if these troubleshooting steps do not work.

  • HT1338 I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?

    I downloaded upgrades available. The installation of those took a long time after re- initiatin the system and had to off. After this I could not get it to turn on again. Just stays in the gray screen with apple in the middle. What's wrong?

    Sorry to hear of your problem, but any hardware in a computer can fail - that includes the hard drive, the logic board, etc, etc. Fortunately, it usually doesn't happen that soon; however, I've read of hard drives failing within 6 months.
    So, since you did not purchase the extended Applecare Protection Plan (3 years coverage), you will need to make a decision to repair or sell it as is. I would always purchase 3 year coverage for an all in one or a laptop because repairs are expensive and at least I'd be covered for 3 years.
    We can't speculate on whether there should be a recall or not; these forums are for user to user assistance with technical problems. In your case, there is nothing we can help with since you've already gotten a diagnosis.

  • I have an iPhone 5 and recently when I try to copy and paste the app freezes and returns to the home screen please help.

    When I try to copy paste my app freezes and returns to the home screen please help.

    Try resetting ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that didn't help, tap Settings > General > Reset > Reset All Settings
    Then restart your iPhone.

  • When i try to turn ipod touch on it stays on the black screen with the apple and nothing else happens. whats wrong?

    okay so just as i was typing this the problem resolved itself, but when i went to charge my ipod i noticed ot stayed on the black screen with the apple for a good 10 minutes, so i pressed buttons furiously (!!) and the screen went white and then back on to the screen with apple again. this contiinued for a good 4 tries then eventually went on to my lock screen (which is the very beautiful dom howard not that you know who that is and i dont even know any of you so i dont know why im typing all of this out but i really enjoy typing it's an incredibly exciting past time of mine but unfortunately i havent used capital letters) just wondering if it will happen again

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • HT4689 My daughters Macbook Pro memory appears to be full.  When she puts it on it only stays on the "purple" screen how can I get on it to create memory?

    My daughters Macbook Pro memory appears to be full.  When she switches it on it stays on the "purple" screen.  How do I get to go further to clear some memory?
    Thanks
    Marlene

    Try these tips.
    1. Start up in Safe Mode.
        http://support.apple.com/kb/PH11212
    2. Empty Trash.
        http://support.apple.com/kb/PH10677
    3. Delete "Recovered Messages", if any.
        Hold the option key down and click "Go" menu in the Finder menu bar.
        Select "Library" from the dropdown.
        Library > Mail > V2 > Mailboxes
        Delete "Recovered Messages", if any.
        Empty Trash. Restart.
    4. Repair Disk
        Steps 1 through 7
        http://support.apple.com/kb/PH5836

  • Why does my macbook air only stay on the loading screen?

    When i turn on my macbook air it only shows the loading screen. How can I fix it?

    See this Apple note.

  • My ipod touch 4g turned off and wont turn on again because it is frozen on the apple screen. please help!

    My ipod touch 4g turned off and when i try to turn it on it says its not charged. so i charge it and the apple screen comes up but stays frozen like that for a really long time, and then it just goes back to the "needs to be charged" screen. please help!

    - First try resetting the iPOd. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Next connect to a computer and restore the iPod if theiPod appears in iTunes.
    - Next see if placing he iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Error uploading textbook to Apple store

    I have a problem uploading my textbook I created with the iBook creator... whenever I use iTunes producer I get given this error message ERROR ITMS-4064: "Unsupported extension 'PNG' for artwork asset type." at Book (MZItmspBookPackage) I tried conve

  • XFCE/Xscreensaver not locking on hibernate

    I have XFCE and installed xscreensaver. My screen locks like it is supposed to when suspend, so I need to enter my password on resume. However when I resume from hibernate it goes straight back to my desktop, no locked screen. Anyway to make this wor

  • Can't re-install FCE

    I updated to FCE HD from 2.0.2. The initial install went fine. I was able to use Live Type and Soundtrack fine. Then after making titles in Live Type I started getting a message on the icon and in the viewer after importing the title that said: Media

  • Getting result from a telnet command through Java

    Hi, I've been using a set of classes found here: http://javatelnet.org/ to do telnet through Java in a non-interactive mode. However I've got a problem when retrieving the result of a command sent to the remote host: the classes read the stream until

  • RZ20 - Performance Overview memory monitors

    I have a question about the values displayed in one of the CCMS monitors. In RZ20, following this path: SAP CCMS  Monitor Templates      Performance overview          <SID>\<SERVER_INSTANCE>               Memory Management I do the following: Click o