When i turn on mozilia fire fox my docks and menu bar disappear but when i use other app i can still se dock
So today when i turn on mozilia fire fox i could not see menu bar and my dock bar but when i open other app i can see thoes 2 things.
You're in fullscreen mode. If you put the mouse at the top of the screen, does the menu bar reappear? If so, do you see a blue box like this on the right side of the menu bar?
If so, click it.
Similar Messages
-
I turned off my fire vault by accident and is there a way to stop it from decrypting cause that is going to take a long time and i want to keep my hard drive encrypted.
is there a way to stop it in the middle so it does not go through the whole processIt's called, "FileVault." If there is no option to stop the process, then the best bet would be to wait until decrypting is finished. Otherwise you run the risk of borking the whole thing. It's hard to imagine how you can accidentally turn off FileVault.
-
Can I use 32 bit fire fox on a 64 bit dell laptop running windows 7 ultimate, if so where can i down load it?
this link just upgraded mu current firefox and said nothing about a 32 bit version.
-
When I am abroad (living in Norway) the phone only temporarily (and seldom) connects to a network. Most of the time is says "no service" in top left corner...From advice I have tried to turn it on/off...with and without sim installed...roaming makes no diff. Can anyone help me?
You're welcome.
If she has full reception and connection with the same cell phone carrier where you don't - with you both using a SIM card provided by the same carrier while in Norway with an unlocked iPhone, then make an appointment at an Apple Store if there is one nearby to have a diagnostic test run on your iPhone.
In the interim, I would contact this cell phone carrier in Norway to ensure your iPhone is provisioned properly. They can run a reset for your account that will require powering your iPhone off, so call them with your wife's iPhone for this. -
Why does the right side the menu bar disappear or blink when I turn on my epson XP 200 printer?
I have also been experiencing the same problems. Mac user since 1991. I own various machines but this particular problem lies with a MacBook Pro 2008 using 10.5.4
The laptop has two users. One is fine while one is not. A new user was created but upon logging in for the first time the right hand side of the menu bar blinked off and on just like the existing user. No hard drives have been connected. All files backed up via drag and drop wirelessly.
Since this development I have been unable to get to my iDisk; it might be related or coincidental. Last night I re-entered my .mac/MobileMe account details whereupon I was presented with a message saying the machine had not synced before. Not true. It had been syncing automatically since the day of purchase March 2008. I wonder if there is a connection between somewhere deep down in the Library, updated versions for 10.5.4 and MobileMe. Somewhere along the line a combination of events triggered the tool bar to start blinking...
It's strange how one user is fine (seldom used and DOES NOT have a MobileMe account) while the main one, me, is not fine (used heavily throughout the day and DOES have an active MobileMe account).
At this point, I don't intend to re-install and start all over again (I've done this so many times with other machines over the years that I was hoping those days had finally gone based upon Apple's brilliant recent advancements).
Any help or comments will be welcome.
Cheers! -
Why my music turns off on iPad when I use another app?
WWhy does my music turn off when I use another app?
What Music? You are aware that there are many ways that you can play music on your iPad other than by just using the built in Music app, aren't you? Many apps that play music will not run in the background if the app that you are using has sound.
-
Apple logo and menu no longer come up when turning on my 2nd gen nano. However, if I just hit the right buttons the songs play and it runs normally. On occasion the logo and menu come on but it is now in chinese. Should I restore or Junk?
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
nno sound when I use in app streaming
Hello Saranginotes,
After reviewing your post, I have located an article that can help with iOS audio issues. It contains a number of troubleshooting steps and helpful advice for the issue you are experiencing:
If you hear no sound or distorted sound from your iPhone, iPad, or iPod touch speaker
Can't hear anything from the built-in speaker of your iPhone, iPad, or iPod touch? Maybe you can hear, but the sound is distorted, muffled, intermittent. Or maybe you hear static or crackling noises. If your iOS device has any of these issues, follow these steps.
Follow these steps and test the sound after each one.
Go to Settings > Sounds and drag the Ringer And Alerts slider to turn the volume up.
If you can hear sound from the speaker, then the speaker works. Continue with these steps to find the setting or switch that's affecting the sound. If you can't hear sound from the speaker, contact Apple Support.
Make sure the Ring/Silent switch is set to ring. If you can see orange, it's set to silent.
Restart your device.
Open an app that has music or sound effects. Adjust the volume with the volume buttons or the slider in Control Center.
Go to Settings > Bluetooth and turn off Bluetooth.
If there's still no sound, connect a headset. If you can hear sound through the headset, remove it and clear any dust or debris from the headset jack of your device.
If the device is in a case, make sure that the case doesn't block the speaker.
Use a brush to gently clear any debris from the speaker and Lightning connector (or 30-pin dock connector). The brush should be clean and dry and have soft bristles.
Update your device to the latest version of iOS.
If you followed these steps and still hear no sound or distorted sound, contact Apple Support.
Thank you for contributing to Apple Support Communities.
Cheers,
Bobby_D -
My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything
I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong. -
please help me!!!! my macbook pro 15 running on mountain lion is hanging a lot...sometimes when i use any app than it get freeze for some seconds...what should i do?
Hardware Information:
MacBook Pro - model: MacBookPro8,2
1 2.2 GHz Intel Core i7 CPU: 4 cores
4 GB RAM
System Software:
OS X 10.8.2 (12C60) - Uptime: 0 days 1:17
Disk Information:
TOSHIBA MK5065GSXF disk0 : (500.11 GB)
disk0s1 (disk0s1) <not mounted>: 209.7 MB
Macintosh HD (disk0s2) /: 499.25 GB (424.92 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
HL-DT-ST DVDRW GS31N
USB Information:
Apple Inc. BRCM2070 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. Apple Internal Keyboard / Trackpad
Apple Inc. FaceTime HD Camera (Built-in)
Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
Problem System Launch Daemons:
[failed] com.apple.coresymbolicationd.plist
Problem System Launch Agents:
[failed] com.apple.afpstat.plist
[failed] com.apple.AirPlayUIAgent.plist
[failed] com.apple.coreservices.appleid.authentication.plist
[failed] com.apple.rcd.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist
[loaded] com.adobe.SwitchBoard.plist
[loaded] com.google.keystone.daemon.plist
[loaded] com.microsoft.office.licensing.helper.plist
Launch Agents:
[loaded] com.adobe.CS5ServiceManager.plist
[loaded] com.google.keystone.agent.plist
User Launch Agents:
[loaded] com.adobe.ARM.202f4087f2bbde52e3ac2df389f53a4f123223c9cc56a8fd83a6f7ae.plist
[loaded] com.facebook.videochat.Akshay.plist
[loaded] com.microsoft.LaunchAgent.SyncServicesAgent.plist
User Login Items:
Sony Ericsson Bridge Helper
BitTorrent
uTorrent
3rd Party Preference Panes:
Flash Player
Java
Internet Plug-ins:
AdobePDFViewer.plugin
AdobePDFViewerNPAPI.plugin
Flash Player.plugin
FlashPlayer-10.6.plugin
googletalkbrowserplugin.plugin
JavaAppletPlugin.plugin
npgtpo3dautoplugin.plugin
QuickTime Plugin.plugin
SharePointBrowserPlugin.plugin
User Internet Plug-ins:
Google Earth Web Plug-in.plugin
Picasa.plugin
Bad Fonts:
None
Top Processes:
14.6 % WindowServer
6.9 % coreaudiod
6.4 % uTorrent
1.9 % WebProcess
1.4 % iTunes
1.2 % EtreCheck
0.5 % fontd
0.2 % NotificationCenter
0.1 % Dock
0.0 % Microsoft -
When I use Home Sharing, I can see the library I want to copy under Shared, but I can't get it save on the computer under the regular library. I go to edit and "select all" but there is no import button that is in the right hand corner. Also, it will not let me click and drag the music. How do I get it from one computer to the other?
Since both computers are connected via the network, you could simply copy the ENTIRE iTunes folder from one computer to another via the network.
If both computers are running Windows, use the Easy File Transfer Utility built into Windows to move iTunes and all other user media/data. -
I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else?I have problems with my films that become slightly jerky after I have imported
and edited them in iMovie and then burned them onto a DVD using iDVD.
I can see the weak jerkiness when panning in both laterally
and vertically.
I shoot with a camcorder Canon Vixia HF10. The camera has been set to deliver HD quality (1920x1080). But I have accidentally filmed with a frame rate of 60 (?).
When I import the films in iMovie I have been asked if I want to change to frame rate 30 (instead of 25). I have chosen 30.
Could it be the setting of a frame rate 60 in my camcorder that causes jerkiness when panning or what else? -
I have apps that want to get updated but when i try to update them, the progress bar appears but also dissapeares again, the app isnt updated..
I keep trying but i cant update the apps..First reboot the iPad by pressing and holding down the home and sleep/wake buttons (power) at the same time until the apple logo appears on the screen, then let go.
If that doesn't work then reset the phone by going to settings/general/reset/reset all settings -
Downloaded music apps o.k. Says login failed when I put in user and password. No trouble when getting any other apps.
Sounds like you may have deleted something you shouldn't have. Boot to an OS X DVD or a bootable backup, and using Disk Utility, do a repair disk, and while there repair permissions. Disconnect any peripherals, and reboot. If you get the same startup behavior, do a safe boot, by holding the shift key down when booting. If that works, try a normal boot. If neither step helps, you may need to relaod your operating system.
-
hello i need help for adobe creative cloud...when i launch application adobe cc 2014 for photoshop or illustrator.....the apps launch and i can see the workspace and menu bar for a while and suddenly this application close automatic
Sign in, activation, or connection errors | CS5.5 and later
Mylenium
Maybe you are looking for
-
How to display properties of dimension on the input form and report in bpc
Dear Expert, Please tell me how to display properties of dimension on the input form and report in bpc. I can only display dimension number. thanks so much hungth
-
Automatic creation of purchase orders at goods receipts
Dear guru , I want to create purchase order when i execute GR Returns (mvt 161). Where I define the purchase order document type that I want to automatic create ? Thanks.
-
Hi, I have done the EO substitution. But facing some issue on that page. So I want to delete the customization done on the standard EO. I tried jdr_utils.deletedocument . Is it the right step to delete customized EO? or is there any other step requir
-
HI, I need a Search help for time field in case of input field ie the one similar to the date field.In webdynpro we have mapped the Tims data type to our input field.here Tims data type is the data type for time in the backend(R/3 system).Pls help m
-
Gary Seckendorf - Flash Player not working
Hello, My name is Gary Seckendorf. I have a query, My Adobe Flash player is not working properly in Windows 8 system. Give me a suggestion regarding this.? Thanks Gary Seckendorf