When I turn on photobooth and Facetime it says that my camera is not connected. What is wrong?

When I try to use Photobooth and Facetime on my BRAND NEW Macbook Air it looks like the pictures that I attached. Literally this is a brand new macbook so it can't be because something is broke right?

Yes, sounds like it.

Similar Messages

  • My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me

    My ipad is connected to my wifi, however when i try to sign my ipad into facetime is says that it is having trouble connecting. I use my wifi to get on the internet on my iPad so i have no idea what the problem is. Help Me

    - Did it successfully connect to the network before?
    - Do other devices successfully connect to the network now?
    - Does you iPod successfully connect to other networks?
    - Have you reset your iPod?
    Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Reset network connections: Settings>General>Reset>Reset Network Settings
    - Powered off and then back on your router
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections
    -When you restored you iPod did you restore to factory defaults/new iPod?  If not try that.
    - If you look at the network properties on the iPod what IP address is assigned when you think you are connected but actually have no internet connection.  If it starts with 169 then the iPod never connected to the router, the 169 address are self assigned.

  • I just updated my RAM and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.

    I just updated my RAM (replaced the two 2 gig cards with two Corsair 8 gig cards) and I keep getting a crash report. I have a 21.5 Inch mid 2010 imac. I also am experiencing slow load times with Photoshop and when I try to open Final Cut it says that quartz extreme is not compatible and that I have no VRAM even though I do.
    Here is the crash report:
    Interval Since Last Panic Report:  5426204 sec
    Panics Since Last Report:          2
    Anonymous UUID:                    2DD57DDB-BB42-5614-395A-CA6225BDAFD9
    Wed Mar 20 11:36:53 2013
    panic(cpu 0 caller 0xffffff801aa43d8e): "a freed zone element has been modified in zone: maps"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:219
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81eb0eb950 : 0xffffff801aa1d626
    0xffffff81eb0eb9c0 : 0xffffff801aa43d8e
    0xffffff81eb0eba00 : 0xffffff801aa435d2
    0xffffff81eb0ebae0 : 0xffffff801aa663f7
    0xffffff81eb0ebb20 : 0xffffff801aa67398
    0xffffff81eb0ebc70 : 0xffffff801aa6887c
    0xffffff81eb0ebd20 : 0xffffff801ad5b8fe
    0xffffff81eb0ebf50 : 0xffffff801ade182a
    0xffffff81eb0ebfb0 : 0xffffff801aaced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    Not yet set
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x000000001a800000
    Kernel text base: 0xffffff801aa00000
    System model name: iMac11,2 (Mac-F2238AC8)
    System uptime in nanoseconds: 1070542822
    last loaded kext at 707348380: com.apple.driver.AppleIRController    320.15 (addr 0xffffff7f9c53e000, size 28672)
    loaded kexts:
    at.obdev.nke.LittleSnitch    3908
    com.apple.driver.AppleIRController    320.15
    com.apple.driver.AppleUSBCardReader    3.1.0
    com.apple.driver.AppleFileSystemDriver    3.0.1
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    34
    com.apple.iokit.SCSITaskUserClient    3.5.1
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.2.2
    com.apple.driver.AppleUSBHub    5.2.5
    com.apple.driver.AppleFWOHCI    4.9.6
    com.apple.driver.AirPort.Atheros40    600.70.23
    com.apple.driver.AppleUSBEHCI    5.4.0
    com.apple.driver.AppleAHCIPort    2.4.1
    com.apple.iokit.AppleBCM5701Ethernet    3.2.5b3
    com.apple.driver.AppleUSBUHCI    5.2.5
    com.apple.driver.AppleEFINVRAM    1.6.1
    com.apple.driver.AppleACPIButtons    1.6
    com.apple.driver.AppleRTC    1.5
    com.apple.driver.AppleHPET    1.7
    com.apple.driver.AppleSMBIOS    1.9
    com.apple.driver.AppleACPIEC    1.6
    com.apple.driver.AppleAPIC    1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient    196.0.0
    com.apple.nke.applicationfirewall    4.0.39
    com.apple.security.quarantine    2
    com.apple.driver.AppleIntelCPUPowerManagement    196.0.0
    com.apple.iokit.IOUSBHIDDriver    5.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.5.1
    com.apple.iokit.IOUSBMassStorageClass    3.5.0
    com.apple.driver.AppleUSBMergeNub    5.2.5
    com.apple.driver.AppleUSBComposite    5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.5.1
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.5.1
    com.apple.iokit.IOUSBUserClient    5.2.5
    com.apple.iokit.IOFireWireFamily    4.5.5
    com.apple.iokit.IO80211Family    500.15
    com.apple.iokit.IOAHCIFamily    2.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.2b1
    com.apple.iokit.IONetworkingFamily    3.0
    com.apple.iokit.IOUSBFamily    5.4.0
    com.apple.driver.AppleEFIRuntime    1.6.1
    com.apple.iokit.IOHIDFamily    1.8.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    220
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.security.TMSafetyNet    7
    com.apple.driver.DiskImages    344
    com.apple.iokit.IOStorageFamily    1.8
    com.apple.driver.AppleKeyStore    28.21
    com.apple.driver.AppleACPIPlatform    1.6
    com.apple.iokit.IOPCIFamily    2.7.2
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    Model: iMac11,2, BootROM IM112.0057.B00, 2 processors, Intel Core i3, 3.2 GHz, 16 GB, SMC 1.64f5
    Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
    Memory Module: BANK 0/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    Memory Module: BANK 1/DIMM1, 8 GB, DDR3, 1333 MHz, 0x029E, 0x434D5341384758334D314131333333433920
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 0 incoming serial ports
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: ST31000528AS, 1 TB
    Serial ATA Device: HL-DT-STDVDRW  GA32N
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 4
    USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 6
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3

    There have been a few reports on here where Corsair RAM seems to have caused users a lot of grief with crashes.
    The recommendation on here, mostly, is to only buy RAM from macsales.com or crucial.com as they guarantee their modules will work and offer a no quibble lifetime guarantee.
    I'd put the original RAM back in, return the Corsair chips for a refund and re-order from one of those two companies.
    http://eshop.macsales.com/shop/apple/memory/iMac
    http://www.crucial.com/

  • I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working.  But Windows 7 recognizes the device and I can see my pictures.  Same thing happens when I try to put music onto the iPad.

    I am trying to move a pdf file onto my iPad2, and it says that the device is not connected or has stopped working.  But Windows 7 recognizes the device and I can see my pictures.  Same thing happens when I try to put music onto the iPad.

    When in iTunes on the computer,my our ipadmshould show under devices.
    Click on your ipadmunder devices then go to music at top center of the iTunes window, check what you want to sync for music. You need to set it to a folder if I remember which would have your music in it you want synced.
    Same with PDF files.....there should be an option for data or even PDF files at the top center area of iTunes when the iPad is clicked under devices.
    If your iPad does not show or you cannot click on it under devices which is in the leftane of iTunes, the iPad is not being seen by the computer.
    Try unplugging the USB cord from the laptop then give it a few and see if the computer picks it up.

  • Every time I try to sign in to messenger and FaceTime it says that I have to check my network connection and try again. Can anyone help? (Ps I'm using an ipad 2)

    Every time I try to sign in to messenger and FaceTime it says that I have to check my network connection and try again. Can anyone help? (Ps I'm using an ipad 2)

    Hello MetallicMango88,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/TS1398
    Best of luck,
    Mario

  • I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried

    I have updated my ipod touch to ios5 and it is saying that the device is not registered in apple developers program.I have a back up fle in itunes and itunes is not prompting for restore.how can i restore my pod?pls help me to restore my ipod .am worried as it my new ipod and am not able to restore it.pls help.

    i have done that .:(..PLs help me restoring it to older version.though i have a back up file.in itunes..am not able to restore it.as itunes is not asking for resotre option..pls help me

  • HT1937 if you are to update your iphone and after it says the simcard inside is not supported, what can yo do?

    if you are to update your iphone and after it says the simcard inside is not supported, what can yo do?

    That means your phone was hacked to unlock it.
    ONLY the carrier it is locked to can authorize unlocking it.
    It may no longer be possible to process a legitimate unlock on a phone that was hacked/jailbroken. The hack can do permanent damage.
    You can find out who it was locked to and find out if they offer unlocking and if you qualify.
    Don't be surprised if you are never able to use it again. It may be permanently bricked.

  • I don't have a mac, but I have iTunes and when I try clicking on a song it says that my computer is not authorized, how do I authorize it?

    I'm trying to play songs on my PC, on iTunes and it keeps saying that my computer isn't authorized, how do I authorize it?

    On your Computer... Open iTunes...
    and from the Menu Bar select Store...
    From the Store menu, choose Authorize This Computer.
    When prompted, enter your Apple ID and password, then click Authorize.
    See Here >  http://support.apple.com/kb/HT1420

  • When I launch ITunes a window pops up saying that this version has not been correctly localized for this language please run english version?

    Can someone please tell me what I need to do. My Itunes won't open up. A window pops up saying that this version is not correctly localized for this language please run the english version.

    Let's try a repair install of iTunes.
    Restart the PC first.
    If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair".
    If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", and click "Change". Select "Repair" and click "Next" as per the following screenshot:
    Can you launch your iTunes now?

  • I can´t actualize Iphoto and Imovie. Says that someone buy this App. What can I do?

    I can´t actualize Iphoto and Imovie. Says that someone buy this Apps. But this IMac is mine and the others Apps works with my ID

    Contact App Store support. There's a link on the right hand side of the App Store Window. They're the only ones who can sort out account issues.

  • HT5622 I recently installed a new computer and now iTunes says that my computer is not authorized. How do I authorize it?

    iTunes says that my computer is not authorized.
    I recently installed a new computer.
    How do I authorize it?

    If the computer's running Mac OS X, move the cursor to the very top of the computer's screen, click on Store, and choose Authorize this Computer.
    If the computer's running Windows, press the Alt and S keys and choose Authorize this Computer, or click here, follow the instructions, click on Store in the menu bar, and choose Authorize this Computer.
    (103238)

  • I am unable to successfully install itunes 10.5. I can download it, but when I go to install the program it says that a program could not be run and it won't give the name of the program. I have the vista 64-bit system.

    I cannot install iTunes 10.5. I can download it, but when I go to install it says that a program cannot be run and it won't give the name of the program. I have the Windows Vista 64-bit system.

    That would be my first guess.  You might be trying to install the 32 bit version of the program.
    Update the thread with more info on your apple software etc if its a 64 bit install you're trying to perform.

  • Having error message when i try to download some application it says that the program is not a Win32 application so can't open or run it..

    like on graiglist when I look for job and press the reply button to send my resume info to the employer, I get this error message all the time.
    The add-in “C:\PROGRAM 1\AVG\AVG8\avgxch32.dll” could not be installed or loaded
    This problem may be resolved by using Detect and Repair on the Help enu. Unable to load.
    You may be out of memory out of a system resources, or missing a .dll file.
    and the error message i get when i try to run or download an application
    is is not a valid Win32 application

    [[Firefox is already running but is not responding]] has steps that you can try. It sounds like you may have something that is hanging your browser on exit (probably an extension or a locked profile) and the steps on that page should help clear it up.

  • Home Sharing between Macbook Pro and AppleTV not connecting, what's wrong?

    So I have one of the late 2011 Macbook Pro models and the newest AppleTV that I do a lot of Home Sharing for movies and stuff like that. This problem keeps popping up though where they can't communicate with each other and the videos either stop loading half way through, or my AppleTV can't even connect with my macbook to start watching at all. I've gone through most of the possible solutions I've seen posted before and even the troubleshooting by apple about it. I've made sure they are both on the same apple ID, the same wi-fi network, restarted my router, even re-setup my router from scratch, closed itunes on my macbook, turned my wifi on and off a couple of times (worked for a few then stopped again), made sure that everything is on the most current software, but nothing seems to be doing the trick. This has been going on for months now and I'm pretty much sick of it happening. Somebody please help me fix this so I can get on with my movies!!

    Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
    You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
    Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
    There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
    If this doesn't help, contact your ISP, this is most likely a network problem.

  • When i get on my phone and and go to my mail it says that the server is not connected

    When i get on my phone and go to email sign it says the server cannot be connected?  Then when I enter for updates it goes back and forth to the icloud and apple id and arent they both the same?

    where do i get answers?

Maybe you are looking for