When I turn the "Panorama" nothing works. What should I do?

when I turn the "Panorama" nothing works. appears A black screen and a photo are dark. in normally mode, no such problems. What should I do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Similar Messages

I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

I have ipod nano 6G.I was trying to restore it to clear all the data but it showed error 1439 and couldn't restore.I tried every method given in errors help page but nothing worked.What should i do?

Just in case (even though your symptoms aren't explicitly mentioned in the document), let's check to see if there's a LSP problem in play here:
Apple software on Windows: May see performance issues and blank iTunes Store

Hi. just downloaded the primer app via creative cloud but when i click on it nothing opens/ what should i do??

hi. just downloaded the primer app via creative cloud but when i click on it nothing opens/ what should i do??helppppp

Do not post twice pleaseeeeeeeeeeee help so you do not confuse the people trying to help you
Cloud Getting Started https://helpx.adobe.com/creative-cloud.html
-Install, update or UNinstall, and launch after installing
You should also provide more information when asking a question
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840

I have a new IPad Air and when I turn the screen nothing rotates anymore like it should

I have a new IPad Air and when you turn the screen it doesn't rotate anymore

First thing to check is to see if there is a circular arrow around a small lock at the top right of your screen next to the battery indicator. If there is Rotation Lock is turned on. You can turn it off in the Control Center. Swipe up from the bottom of the screen and find that icon in the panel that comes up. Tap on that icon to turn off Rotation Lock.
If Rotation Lock is not on try a reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

In creative cloud the apps arent working what should ido

please help

My crystal Ball has failed to return your answer.
Supply pertinent information for quicker answers
The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
Adobe product and version number
Operating system and version number
The full text of any error message(s)
What you were doing when the problem occurred
Screenshots of the problem
Computer hardware, such as CPU; GPU; amount of RAM; etc.

I got an ipod shufle last week, now it wont work anymore, the butons dont work what should i do?

please help

Make sure the buttons have not been locked. See page 21 of your iPod's User Guide for more information on how to lock and unlock the iPod's button.
http://manuals.info.apple.com/en_US/iPod_shuffle_4thgen_User_Guide.pdf
B-rock

HT1212 My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?

My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

My phone died last night and when I plugged it in it wouldn't turn on.I tried restarting it but it has yet to turn on since last night,It was just a black screen,i try the on/off and home buttons together but its not working,What should I do?

How long have you had your phone? Because if you've had it a long time, the battery in the phone might of died on you. Or have you dropped it in water, snow, from high up? All those things could of disconnected something internally in your phone, or permentaly damaged the internal hard drive its self, or the sims card.

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

My iphone 4S only start whit cable plug in and then show battery very low (with red line end) then try to turn on but show searching in operator name command and not connecting and no work properly and when I plug out it turn off!!! what should I do?

I'm afraid you'll have to get the phone serviced, dropping the phone must have damaged additional parts inside the phone.
But Apple will not service the phone anymore, opening the phone and replacing the battery should only be done by authorized personal, not by users.
You'll have to look for a 3rd party repair shop and see if they can fix this, sorry.

My ipod nano 5th gen wont play movies or videos on my ipod but plays them on itunes when i click on it the screen flashes black i have tried taking the movie off my ipod and putting it back on but it still won't work what should i do?

My ipod nano 5th gen. won't play movies or tv shows but it plays them on itunes. When I click on it the screen flashes black. I have tried taking the videos off my ipod and then putting them back on but it still won't work. what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

My iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

my iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. You likely have a bad battery.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace yur battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. A replacement costs about $10
iPod Touch Repair – iFixit

So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't

So this morning, the sound on my MacBookPro was working perfectly, but then all of the sudden, the sound didn't work. When i turned the volume up, it showed it turning up, but there was no noise. I also tried plugging in my earphones, and it still didn't work. I don't know what to do!!

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Every time i turn on my macbook it freezes until i turn it off by pressing the on/off button then when i turn it back it works fine? can anyone help me

every night i turn off my macbook and in the next day i turn it on it freezes nothing will happen at all so i have to press the on/off button untill powner down then when i turn it back in works fine

Try a SafeBoot then restart as normal http://support.apple.com/kb/HT1564

My sister fMy sister forgot her passcode, so now wheb I turn iPad on, it says "iPad is disabled connect to the iTunes".I already did that, but it sill does`t work.What should I do now?

My sister forgot her passcode, so now when I turn the ipad on it says "iPad is disabled connect to iTunes. I did that, but it still doesnt work. What should I do now? And what will hapen?

Did you try this?
1. Turn off iPad. Press and hold the Sleep/Wake button for a few seconds until the red slider appears, slide to turn off.
2. Connect USB cable to computer
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune (make sure you have the newest version of iTune)
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad

HT201257 for me it doesnt work , I hold the D key , but nothing happened :( , what should i do to check my Hardware ?

I have MAc book pro 15-inch, Early 2011 , I want to check my hardware , but when I hold the D key , nothing happened
what should I do , if I want to check my hardware?

Try option d.
This will attempt to load an Internet version of Apple Hardware Test.
If this still does not work, you must boot from your original Applications DVD. It is the one bearing the text "AHT version xxxx" on it.

When I turn the "Panorama" nothing works. What should I do?

Similar Messages

Maybe you are looking for