When I turned on my device the inbox mail was empty, in time machine does not show options to find old back up, only inbox is not listed... how I can get my inbox emails back?
I turned my macbook on and all the emails of inbox were gone. In time machine, only the inbox option does not shows option to get back old back ups... how I can get my inbox emails?
I figured it out. I couldn't see the old backups because the sparsebundle had not been properly unmounted in a previous session, so it kept giving an "already in use" error. The problem was solved by restarting the Time Capsule through the Airport Utility, mounting the sparsebundle by double-clicking it, and then going through the "Browse other backup disks" option in the Time Machine menu bar icon.
The following links were helpful in figuring this out:
http://pondini.org/TM/C12.html
http://pondini.org/TM/17.html
Similar Messages
-
Restore from time machine does not list all my backups. I know they exist but their dates are not present on the restore list. Any help appreciated. If I must use one of these older dates to restore, how do I then get the more current data off time machine?
Ok, so am i correct in saying that the steps to fix are as follows.
That's one option, but not what I meant by restoring in the time-travel view. The latter is what you get when you enter Time Machine.
is the fresh install not going to be able to "see" the time machine backups that I have at the moment.
It should, but sometimes people report that it fails. I'm not sure why that happens. -
Time Machine does not back up all iTunes music files
Hello, I'm trying to view the music files, on my Time Machine backup disc, from a CD that I recently imported into iTunes. My iTunes library resides on my hard drive. The backup disc shows files for some of the other music that is in my iTunes library, but not from the new CD. I did several backups after importing the new music, but the song files still do not show up in Time Machine. Any ideas for why the files don't show up?
My ultimate aim is to copy those music files onto another computer, but my research on the support pages suggests that I should not do it this way. Instead, I will copy the music files onto another disc (not using Time Machine) and then import them onto the other computer. Please confirm that this is the best way to proceed.
But in the meantime, I'm wondering why Time Machine does not show my newly imported music.
Thanks very much for any help you can provide.New formulation of my question:
A file dated at 10:00 may not appear in the back-up dated 11:00. -
I upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3?
i upgraded to the 4.3.5, and half my apps are not working. how do i get back to 4.3.3? all my best and regular apps are not working and i need them! so how do i down grade
There is no legitimate (Apple supported) way to downgrad an iOS on a device. Have you tried downloading/installing a new (free) app. That works for many users with that problem.
-
Is there a fix or upgrade to deal with the many problems I am experiencing since I installed Lion? I can no longer utilize Time Machine (Does not see the back-up drive); my wireless mouse does not work properly; my iMac has slowed down considerably. I am reminded of having a PC machine again. Bummer!
Either downgrade to Snow Leopard or try reinstalling Lion.
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files. -
What is the status of time machine not working with yosemite?
I upgraded mu mac pro to yosemite and since have found time machine does not work.
Also, my old backup via a clikfree wireless backup does not work any longer.
Is anyone working on this issue?
Is there anyway I can backup my information today and until time machine &
yosemite get fixed?These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the word "Starting" (without the quotes.) You should now see log messages with the words "Starting * backup," where * represents any of the words "automatic," "manual," or "standard."
Each message in the log begins with the date and time when it was entered. Note the timestamp of the last "Starting" message that corresponds to the beginning of an an abnormal backup. Now
CLEAR THE WORD "Starting" FROM THE TEXT FIELD
so that all messages are showing, and scroll back in the log to the time you noted. Select the messages timestamped from then until the end of the backup, or the end of the log if that's not clear. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ If all you see are messages that contain the word "Starting," you didn't clear the text field.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. Don't post more than is requested.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting. -
My time machine does not back up and giving me this error message: The backup disk image “/Volumes/Data-1/Amiel’s MacBook Pro.sparsebundle” is already in use. Pls help.
Make sure that there are no other Macs backing up at the present time.
Pull the power cord from the back of the Time Capsule
Count to ten
Plug the power cord back in
This will "fix" things about 98% of the time. Post back if you are in the unlucky 2% category. -
Time Machine does not recognize my 430 GB iMac backup on 1 terabyte Time Capsule. Reports: not enough space; can’t back up. How do I get it to recognize the old backup and continue backups?
Thanks for the Time Machine Troubleshooting link. Apparently things have changed since 10.7.0. Backups.backupdb doesn’t exist. Path now is: Time Capsule/Data/Daru’s iMac.sparsebundle. So I did Terminal (I usually avoid Terminal) using the instruction in B6. It does not appear to be working. It went through looking for backup, preparing backup, and is now stopping backup, and the TMBackup has disappeared from the sidebar.
Well, just now Time Machine progressed to preparing backup again; the Tiime Machine Backups appeared in sidebar, and with it Backups.backupdb/Daru’s iMac/2012-04-21-112939.inProgress. So it does exist... I’ll let it run, see what happens... But that is a strange date. Today is 28.
I’ll let you know the outcome.
Oops. Just ended! Real time report: “Backup too large for disk...“ So it is not recognizing the old backup. I’ll look at those instructions again, see if I can do the Terminal thing with the backup running. I doubt I can damage anything except the existing baackup which I'll lose anywy if I can’t achieve recognition.
Daru -
When you install Premiere Pro as the admin on an iMac the audio functionalities work well but a second admin account on the same machine does not work. What can I do to fix this?
It is a bad idea to hack computer passwords when you don't own the computer
Good luck with the school and the parents. -
after installing lion, time machine does not always back up. The back up disk is occasionally not recognized. Help!
This is easy one.. for most.. just restart the TC.. ie pull out the power.. count to 10.. plug in the power.
If the simple doesn't work you can see more info here.
C12 http://pondini.org/TM/Troubleshooting.html -
I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.
I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered. -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl -
Time machine does not back up iPhoto in mountain lion ?
My Time Machine does not back up my iPhoto library. When I open Time Machine I get Desktop display going back to installation date.
All other applications respond correctly including Mail, Contacts, etc. My Seagate drive is not involved in the present programme of repair I have been told by Apple. Any ideas?I'm now fixed and done (update to latest software and learn how to use it)
Thanks again Ivan for the article, it alerted me to otherwise incomprehensible changes in iPhoto/Time Machine operation such as in my case would transfer 3.8GB of data to restore a single photo, while apparently loosing all photos added after that backup time.
However the article says:
When using iPhoto ’11 (version 9.2 or later) and Time Machine with OS X Lion 10.7.2 (or later), iPhoto no longer has the Browse Backups option. This means that instead of restoring specific photos within your iPhoto Library, you must restore your entire iPhoto Library.
This may be practically true but it is technically false.
To restore a single photo in iPhoto '11 with Time Machine it goes something like this:
Start with your Time Machine hard drive and navigate many steps (including showing package contents where necessary) all the way through to the photo/date you want. Drag it to your desktop. (Do not make any edits in Time Machine!) Import to iPhoto. Click on last import in iPhoto. Right click the photo and change the event name, then look for it at the right date in iphoto with the new event name.
Hopefully those with more time and patience can check this out and see what it can do. I had to do it twice with Apple suport senior tech to get it. What a pain compared to iPhoto' 09 but at least now I can restore iPhoto library or a photo if necessary.
David -
Time Machine does not see back-up file on Time Capsule
I recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
RobertI recently moved. I have a Time Capsule which is also my airport base station. I have about 7 months worth of back-ups on the drive for an iMac and a MacBook. The local cable company would only hook up the modem directly to my iMac and would not set up through the Time Capsule as it is not one of their routers. No problem. I did it once -- I could do it again. After discovering that it was not as simple as plugging the ethernet cable into the Time Capsule (after doing so, the Time Capsule recognized it had internet feed -- the iMac recognized the Time Capsule/Airport network -- but I could not get onto the net.) I discovered that I needed to do a hard reset. The instructions said the files would not be erased. They were not. I can still see the original back-ups for both computers in finder. But Time Machine does not recognize that either computer was ever backed up. There is no history and when I try a back-up it begins from scratch and creates a brand new back-up file.
How do I get Time Machine to recognize the original back-up files? I tried "choosing disk" in Time Machine preferences but it only lets me choose the actual disk (the Time Capsule) and not an individual back-up file
Thanks in advance to the collective brain trust.
Robert -
I back my iMac to a lacie 3.0TB drive since November last year , there is still room for 0.5TB yet all I can find to my horror is that the earliest back up is 01.03.2012 ?
gavin136 wrote:
What I expected was larger older files to be removed
No, it deletes entire backups, one at a time.
SO I guess that means that I need something ridiculous in size to use as a bakc up ?
That's one possibility. The other is to change your strategy.
Are you backing-up lots of intermediate files? If so, you might consider excluding the folder(s) where that's done, and only backing-up a few semi-finished versions, or perhaps the final product.
Or, exclude the working versions from Time Machine, but back them up to a separate drive or partition with a different app, such as CarbonCopyCloner or SuperDuper. When a project is finished, and the final product is saved by Time Machine, just erase the "other" backup drive/partition.
There are the pink lines but I cannot get access to them past 01.03.2012
Ah, that's a different story. See the pink box in Time Machine - Frequently Asked Question #15A.
Maybe you are looking for
-
My old computer died, got new one, how do I sync my iPhone data TO my new PC?
My old computer hard drive crashed and I just purchased new PC. I would like to sync all my data from my iPhone TO my new computer. I authorized my new computer under iTunes but it will only sync the apps, songs, etc. that I purchased from my iPhone
-
IPOD Touch 3rd Gen Wi-Fi not working...Help Needed ASAP
Hi I have tried the restore IOS and back up suggestions and still can not get into the WIFI it is still greyed out. There is no WIFI address or bluetooth and can not update them...need to get it resolved as it is going to be a pressie on Sat....Pls P
-
I've been using iChat to videoconference with my parents in France for 6 years now. iChat has usually run smoothly (except for occasional problems with the Internet provider), but for the past couple of weeks, when I call, the line says "Starting vid
-
Running zfs65 on nw65 everything seem to be running properly. When I go to run a report from console1, I get the error "unable to log into the database. Ensure that the odbc driver is installed properly." The snmp alerting is working fine because I h
-
Hello - I am trying to create a new price list. I exported an existing one, modified in excel and am now using DTW to import back in. However, when I do this, it does not go past the first Item b/c I get an error msg saying that the Item already ex