When I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines
when I type a document and try to save it, there are black lines over my sentences, as if it had been highlighted, and that's how it prints out, just black lines
Hi Vickey, S,
Sorry for the delay in response. Is it happening with all the files?
Also, please write the steps you are taking to type in the document.
You might try uninstalling and re installing the Reader in case it is happening with all the files.
URL to install the Adobe Reader is Adobe - Adobe Reader download - All versions
Thanks,
Vikrantt Singh
Similar Messages
-
I can't back up my iPhone4. When was I syncing, My computer hang. I restart computer. Itune told me there is an error, delete the back up file and try again. But there are no back up file to delete in preference-device. Please help!
Thank you for answering my question. If I reinstall itune, is it mean that I need to install music, apps, video...everything in itune again? also intall everything in my iphone again?
-
First time user on this forum, so I appreciate any help from anyone. I load up some 80-90 gigs of video to download and it takes in maybe 200 mb and says 'IPod Sync is Complete" I've restored the factory settings, tried doing it manually and nothing works. It will add to my iPhone, so I'm guessing the problem is with the device.
Sorry, Bilbo...I have the latest version (2.0.4) and have over 140 g. free space. Even movies that were on there early but have been deleted cannot be re-added to the iPod. I have followed the instructions in that link, both automatic and manual and nothing seems to do the trick. It initially acknowledges that there are some scores and scores of movies to download, showing on the spacebar that it anticipates some 90 gigs need to be synced. But then it says 'sync completed', lays down the shovel and calls it a day.
Any ideas outside the given solutions? -
I have just reinstalled Adobe Acrobat X1 and I can't save any PDF's that are emailed to me. I just get "This document could not be saves. There is a problem reading this document (21)" and then when I click OK i get "insufficient data for image" Help!
More information about this issue can be found here:
https://forums.adobe.com/thread/1672655
A "quick" fix that worked for me was to uninstall Adobe... then download the base install for Adobe Reader 11.0.
Then download each of the individual updates and run them sequentially.
I've installed back up to the last security update which is version 08 and have been able to do normal Save As operations.
You will have to disable automatic updates in order to stay at version 08 until Adobe resolves this issue in a later release.
http://www.adobe.com/support/downloads/product.jsp?product=10&platform=Windows
Adobe Reader 11.0 - Multilingual (MUI) installer AdbeRdr11000_mui_Std
Adobe Reader 11.0.01 update - Multilingual (MUI) installer AdbeRdrUpd11001_MUI.msp
Adobe Reader 11.0.02 update - All languages AdbeRdrSecUpd11002.msp
Adobe Reader 11.0.03 update - Multilingual (MUI) installer AdbeRdrUpd11003_MUI.msp
Adobe Reader 11.0.04 update - Multilingual (MUI) installer AdbeRdrUpd11004_MUI.msp
Adobe Reader 11.0.05 security update - All languages AdbeRdrSecUpd11005.msp
Adobe Reader 11.0.06 update - Multilingual (MUI) installer AdbeRdrUpd11006_MUI.msp
Adobe Reader 11.0.07 update - Multilingual (MUI) installer AdbeRdrUpd11007_MUI.msp
Adobe Reader 11.0.08 security update - All languages AdbeRdrSecUpd11008.msp -
Hello everyone, So When I use the eraser on a photo and try to save it as jpeg is makes is save it as a copy but the parts that I erased are replaced with a white background and thats not what I want
That may not be what you want, but Jpeg images are flattened, without transparency. Every pixel has a color value, with the default background usually being white. If you want to crate an image that leaves the erased area transparent, you will need to use an image format such as .gif or .pnc.
-
I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!
You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts. -
I have a custom template. When I edit it and try to save it asks me to name it and then I end up with an additional custom template. How do I edit the template and save the changes without creating another template?
Hi Atrec,
If you don't need your old custom template, save your changes with the same template name. It will tell you that this template exists and will ask you Replace? Say yes (if you do want to replace the old with the new!)
To delete unwanted templates, go to Finder > Menu > Go and press the option key. Your Library will show in the Go Menu. Navigate to Library > Application Support > iWork > Numbers > Templates > My Templates.
Delete any unwanted template by dragging it to the Trash or click on it then command-delete.
Having gone to all that trouble to find My Templates folder, right click (or control click) on it and Make Alias. Drag the Alias to any convenient place for a quick way to get back to that folder.
Regards,
Ian. -
When I enter an HTML code and try to save it on a website it doesn't work.
When I enter an HTML code and try to save it on a website it doesn't work.
== This happened ==
Every time Firefox opened
== I went onto a website called StardollI have the same problem(:
My HTML's won't save how they are supposed to! -
Help! My ipod classic is frozen. Even when I attach it to a power source and try to reset it (as per the instructions above), the apple logo never appears. The only thing that happens is that the screen turns alternately light and dark. Thanks!
If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
http://docs.info.apple.com/article.html?artnum=60983
If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
Make sure you do all the following “TRYs”
A. Try to wait 30 minutes while iPod is charging.
B. Try another FireWire or USB through Dock Connector cable.
C. Try another FireWire or USB port on your computer .
D. Try to disconnect all devices from your computer's FireWire and USB ports.
E. Try to download and install the latest version of iPod software and iTunes
http://www.apple.com/itunes/download/
For old and other versions of iPod updater for window you can get here
http://www.ipodwizard.net/showthread.php?t=7369
F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
http://www.apple.com/support/ipod/five_rs/
G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
http://docs.info.apple.com/article.html?artnum=93651
If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
Intermediate Level
A. Try to connect your iPod with another computer with the iPod updater pre-installed.
B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
For Mac computer
1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
5. Eject your iPod and do a Reset
6. Open the iTunes 7 and click “Restore”
For Window computer
Go to folder “My Computer”
Hope you can see your iPod there and right click on the iPod
Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
Now select “Format”
Eject your iPod and do a Reset
Open the iTunes 7 and click “Restore”
In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
Tips
a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iTunes 7.
b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
http://discussions.apple.com/thread.jspa?messageID=2364921�
Advance Level
A. Diagnostic mode solution
If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
iPod 1G to 3G: "Menu" and "Play/Pause"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
iPod 1G to 3G: "REW", "FFW" and "Select"
iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
B. Format your iPod with a start disk
I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
If none of these steps address the issue, your iPod may need to be repaired.
Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
Or visit your local Apple Retail Store http://www.apple.com/retail/
In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ or ifixit at your own risk
http://www.ipodresq.com/index.php
http://www.ifixit.com/
Just in case that you are at the following situation
Your iPod warranty is expired
You don’t want to pay any service charges
You are prepared to buy a new one
You can’t accept the re-sell value of your broken iPod
Rather than leave your iPod as paper-weight or throw it away.
You can try the following, but again, only do it as your last resort and at your own risk.
Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
Last Resort Level
1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
Exclamation point and folder and nothing else
Spank your iPod
http://www.youtube.com/watch?v=3ljPhrFUaOY
http://discussions.apple.com/thread.jspa?messageID=3597173#3597173
Exclamation point and folder and nothing else
http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
What should I do with my iPod? Send it or keep it?
http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
Strange error on iPod (probably death)
http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
Sad Face on iPod for no apparent reason
http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
Meeting the Sad iPod icon
http://askpang.typepad.com/relevant_history/2004/11/meeting_the_sad.html#comment -10519524
Sad faced iPod, but my computer won’t recognize it?
http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
iPod Photo: unhappy icon + warranty question
http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
4th Gen iPod Users - are we all having the same problem?
http://discussions.apple.com/message.jspa?messageID=2235623#2235623
Low Battery, and clicking sounds
http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
Sad faced iPod, but my computer won’t recognize it
http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
Sad iPod solution
http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
Re: try to restore ipod and it says "can't mount ipod"
http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
iPod making clicking noise and is frozen
http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
Cant put it into disk mode
http://discussions.apple.com/thread.jspa?messageID=3786084#3786084
I think my iPod just died its final death
http://discussions.apple.com/thread.jspa?messageID=3813051
Apple logo & monochrome battery stay
http://discussions.apple.com/thread.jspa?messageID=3827167#3827167
My iPod ism’t resetting and isn’t being read by my computer
http://discussions.apple.com/thread.jspa?messageID=4489387#4489387
I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.
Finally, I read a fair comments from dwb, regarding of slapping the back of the iPod multiple times
Quote “This has been discussed numerous times as a 'fix'. It does work, at least for a while. In fact I remember using the same basic trick to revive Seagate and Quantam drives back in the mid to late 1980's. Why these tiny hard drives go bad I don't know - could be the actuator gets stuck in place or misaligned. Could be the platter gets stuck or the motor gets stuck. 'Stiction' was a problem for drives back in the 80's. Unfortunately the fix can cause damage to the platter so we temporarily fix one problem by creating another. But I know of two instances where a little slap onto the table revived the iPods and they are still worked a year or more later.”UnQuote -
I need to delete the entire browsing history so when i type in a webpage it soes not bring up previuosly visited sites. deleting the history does not do this. any one know how to do this
Judy-
If Private Browsing doesn't do it, try Settings-Safari-Advanced-Website Data-Remove All Websitre Data.
Or changing Settings-Safari-Autofill to OFF.
You might also try Settings-Safari and Clear History and Clear Cookies and Data.
As you can see, there are several controls for Safari. Which one works depends on what your problem is.
Fred -
Photoshop Elements 13 program crashes every time when using my Windows 7 PC to edit and try to save a panorama jpg created on a Samsung Galaxy S5 camera phone.
However, Photoshop Elements 11 will perform and save the edits OK. What is wrong with version 13?Hi,
Can you please share the logs?
You can use the Adobe Log Collector tool (Log Collector Tool) and share the corresponding zip file @ [email protected]
Thanks,
Shikha -
Buying a new Mac and try to save all information from iPhone in new iTunes, is it possible? how?
Buying a new Mac and try to save all information from iPhone in new iTunes, is it possible? how?
The easiest thing to do is transfer the library from the old computer to the new one. Quick answer if you use iTunes' default preferences settings: Copy the entire iTunes folder (and in doing so all its subfolders and files) intact to the other drive. Open iTunes and immediately hold down the option (alt) key (shift on Windows) so you get a prompt to choose a library, then select the copied iTunes folder. If this is to a new computer and you put the copied iTunes folder in the default location of Macintosh HD > Users > *User Name* > Music then you don't even need to start with the option key held down, iTunes will automatically look for it there. (Make sure there isn't anything already in the iTunes folder there that you want to keep since you will be replacing it with the one you are moving.)
If you do not have access to the old library (and you always should in the form of a backup you regularly make of your computer and store on a drive in a safe place) and this phone has been synced with a different library you can backup certain items, then erase the phone and restore those items. This will not include media not purchased from the iTunes Store.
iOS: How to back up and restore your content - http://support.apple.com/kb/HT1766 - "Learn how to back up and restore the content on your iPhone, iPad, or iPod touch using iCloud or iTunes."
Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a new computer you transfer the content from the old computer (or its backup) directly to the new computer, not the device to the new computer. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991 -
When I try to set up Time Machine, there are no back up disks displayed. Therefore, I cannot turn on Time Machine. How can I fix this?
Thanks - let it finish, but zero out data is unnecessary. That option is intended to thoroughly erase previously recorded data so that it cannot be recovered without sophisticated data recovery techniques.
Case sensitive is OK but I suggest you simply select Mac OS X Extended since "case sensitive" may complicate things for you in the future, should it be necessary to restore files to a case-ignorant volume.
Once it finishes, make sure it appears as a selectable option in Time Machine. If it does your problems are solved, but consider using Disk Utility and reformatting it. This time don't worry about zeroing unused space, and select Mac OS X Extended (Journaled). It will only take a few seconds this time.
For a more thorough description read Apple Support Communites contributor Pondini's FAQ: http://pondini.org/TM/5.html Read the pink box regarding the subject of case sensitivity.
Also: Mac Basics: Time Machine -
When I type something in the search engine feature, is there a way that when I press enter to search, it comes up in a new tab, rather on the page I am using?
Yes, and I presume you mean both the search engine results, and the pages opened from the results.
Without making any changes you could always use '''Alt+Enter''' once you typed something into the search bar, or the location bar so that it would appear in a new tab. From the search results page you could always use "'''Ctrl+click'''" or "'''Ctrl+Shift+click'''" to open link n a new tab
* Firefox and other Browser Keyboard Shortcuts (Comparison Table)<br>http://dmcritchie.mvps.org/firefox/keyboard.htm
* Keyboard shortcuts | How to | Firefox Help<br>https://support.mozilla.com/kb/Keyboard%20shortcuts
The configuration entries of interest:
* '''browser.search.openintab''' user set boolean '''true'''
* '''browser.tabs.openinnewtab''' user set boolean '''true'''
Documentation
* http://dmcritchie.mvps.org/firefox/tabs_config.htm
* http://kb.mozillazine.org/About:config_entries (I use keyword shortcut of :"aboutconfig:" )
* http://dmcritchie.mvps.org/firefox/tabs.htm
Google settings:
* [x] Open search results in a new browser window.
:By default Google opens links in its search results to the same new tab, but I believe that the configuration changes supplied also fix that because I no longer have to use the keyboard shortcuts to override.
Tools ("Alt+T") > Options > Tabs
* [x] Open new windows in a new tab instead -
I just discovered that when I type name in Reminder, Notes or even email there is a voice repeating the names. Any idea how to disable this function? I never heard it before!! Thanks
I think that you have turned on VoiceOver. To turn it off, enter settings, general, accessibility and turn off VoiceOver.
Maybe you are looking for
-
NO PHONE TAB IN ITUNES PREFS problem with V3i and iTunes
Hey everyone. Just got a V3i and it won't mount in iTunes. It mounts on my desktop, and iSync, but not in iTunes. In iTunes Preferences I don't see the Phone tab. There's iPod, Parental, Music Store, Sharing,Advanced and all that but no Phone Tab. I'
-
Why won't photoshop recognize my raw files?
I just bought the brand new Canon Rebel T5i and I was so excited but then when I uploaded my raw camera files to my computer and tried to open them up in photoshop, it said that I needed the latest camera raw update but when I go to Help--> Updates,
-
IPhoto has disappeared from my iMac . Can you help restore it?
Can you restore iphoto ? It has disappeared from my iMac.
-
I am having the same problem I think. With mobileme you simply copy documents to the idisk folder and then synch. I cannot seem to sink that folder anymore. Any idea as to how I can simply copy folders to icloud and then access the MS Word and PDF
-
Problem accessing BEx web analyzer
All, I just created a new user in portal and assigned (only) three roles Business Explorer, Business Intelligence and Business Planning. After logging in as this new user, when I open Business Explorer>BEx Web Analyzer, I get an error and after going