When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only
When I unplug Apple headphones from my MacBook Pro sond from internal speakers not work, and system soud preferences displayed: Output: optical digital out port only
If you see a red light in the audio output port, then the internal switch is stuck. Insert the earphone plug a few times and see if you can trip the switch. If that fails, insert a cocktail stirrer and the like and jiggle it around inside. If that fails, take it to an Apple store and have the technicians at the genius bar do it for you.
Ciao.
Similar Messages
-
Stuck in headphone (optical digital-out port) mode. What do I do? Plugging and unplugging headphone jack no help.
Do you see a red light in the headphone jack?? If you do, then the microswitch is stuck and you need to turn it off. Try poking it with a toothpick.
If you don't see a red light, then try resetting the SMC and PRAM and see if these helps. Here are the links.
http://support.apple.com/kb/ht3964
http://support.apple.com/kb/ht1379 -
I cannot eject a CD from my MacBook Pro. I tried restarting the computer and holding down the mouse and restarting it to no avail. On Finder, nothing is showing up on the CD Drive. Any ideas on how I can eject it?
How force eject disc: Apple Support Communities
Mac Mini: Eject DVD Apple Support Communities
https://www.macupdate.com/app/mac/49129/forceject-too
Get help with the slot-loading SuperDrive on your Mac computer - Apple Support -
My MacBook Pro has no audio. Sounds preferences showing output is Optical digital-out port. How do I change this to built-in speakers?
I experienced this same problem yesterday on my MacBook Pro, still searching for a solution, several other posts here indicate people have been experiencing this since at lease 2007. I have yet to find a clear solution.
It appears that occasionally inserting headphone causes this, it turns on the Optical digital-out port feature (red light glows inside the headphone port) and takes away the internal speakers option. Restarting did not restore it, but for some reason after sitting asleep overnight the sound started working again and the internal speaker option return in the Sound - Output Window, and the Optical Digital-out option went away.
Here is another post with some ideas on this
https://discussions.apple.com/message/4160477#4160477 -
I installed windows 7 to my macbook pro, but my mousepad does not work in windows 7 and also i can not connect my windows 7 to projector, but i can use my macbook's mouse pad and i can connect my mac to projector,so please help me for windows 7 problem
i try to download now, do you think when i download and install the windows support software, can i fix the problem?
-
I m using macbook pro my enter key is not working suddenly how can i solve this problem?
i m using macbook pro my enter key is not working suddenly how can i solve this problem?
I have tried to delete but Com.Apple.keyboardtype.plist is missing therefore I cannot reset the keyboard
/Library/Preferences/com.apple.keyboardtype.plist -
Hi! I've tried to downgrade my iPhone from iOS6 to iOS5. However, it did not work and I also cannot turn on my device. What should I do?
It is iPhone4. I used RedSnow to downgrade. Unfortunately, it is not success and it make my iPhone death.
If you guys have any advice, please kindly let me know.
Thank you in advance for every answerSorry, the terms of use here prohibit any help. You'll have to go elsewhere.
Good luck. -
I have accidently shut down my Mac Book Pro during windows 7 installation . When I re started it it began to say " Press any key to boot from CD or DVD " but the keyboard is not working . So I cannot boot It and the CD is also in the drive . Please help me to boot back to Mac book Pro and give me a way to start the key bord .
Hey rudreshchoubey,
Thanks for the question. The following resource may help to resolve your issue:
Boot Camp Installation & Setup Guide
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
If Windows doesn’t install properly
Verify that you’re using an original, full version of the 64-bit version of Windows 7 Home Premium, Windows 7 Professional, Windows 7 Ultimate, Windows 8, or Windows 8 Pro.
Restart your Mac and hold down the Option key until one or more disk icons appear on your screen. Insert the Windows installation disc into the optical drive or insert the USB flash drive with Windows into a USB port on your Mac. Select the Windows installation disk icon, then click the arrow beneath it. Quickly press any key on your keyboard to start the installer. Follow the onscreen instructions to repair or reinstall Windows.
Thanks,
Matt M. -
I have a new macbook pro retina running mountain lion. I want to use it with a thunderbolt display. When I close the lid on the macbook pro, everything goes dark.
Plug in the power to the laptop. Then it works.
-
Headphone Jack Glowing Red, Internal Speakers Not Working...
Hey, I have a 2.0GHz White MacBook (almost a week old), and I just recently came across this problem (this morning, actually). I usually have my MacBook connected to some external speakers through the headphone jack, the internal speakers are pretty terrible. Anyway, last night I left the computer on playing music as I fell asleep, this morning I woke up and the computer must have some how come unplugged from the AC power, as it was dead. I plugged it back in and everything was fine (I mean, it had to charge up, and the battery 'health' in iStat Pro was down to 93%, also not sure what this means... But everything else was fine). Then, I unplugged my external speakers and the jack was glowing red, I believe there's an LED inside. The internal speakers would then not work.
I did a quick Google search and discovered that this problem had been experienced on MacBook Pros. Someone recommended plugging in a set of headphones, I did so and then unplugged them and the internal speakers worked for a moment. I plugged in the external speakers again, and they worked (and work) fine. The problem is with the internals, they don't work, and plugging in my headphones again has not solved the problem, and the light is still on when the jack is not occupied.
Any ideas?
[edit] As of this writing, they are currently working, after plugging in the headphones again and unplugging them, however, the light still blinks when I do this, and there is a bit of a hesitation between the headphone being unplugged and the internal speakers kicking in... (longer than normal, I know there was always a slight delay, but this is a few seconds of blinking light and no sound).you can fix this by "cleaning" the audio jack. the computer thinks that a digital output is connected. if you go to sound under system preferences, and it says digital output rather than internal speakers, then this is the problem.
I used a tightly rolled up piece of toilet paper to clean the jack. I twisted it up, stuck it in the jack, and then moved it around for a while. the red light went off and my internal speakers started working. someone else used a toothpick.
also, before i fixed this, i couldn't turn the volume up or down (unless i was using headphones) and the volume level screen that shows up on the screen had a circle with a line thru it...like the no smoking signs, but small and just under the volume bars.
http://discussions.apple.com/thread.jspa?messageID=3700681�
good luck -
Macbook Pro mid 2010- Logic board not working
Hi,
Can logic board of Macbook pro mid 2010 damage in switch on and off or while loading OS mountain lion?
Can you give solution.
Regards
SudeshIf you have tried a variety of devices on both USB ports, and they all work on one and not on the other then the best option is an appointment at an Apple store genius bar. The evaluation will be free regardless of warranty status.
Ciao. -
For the past week or so, I have made changes to the calendar on my MacBook Pro. The changes do not "stick" on my MacBook calendar and do not sync with any other device (iPhone or iPad). I just can't figure this out. Anyone have any suggestions?
By everything, I am assuming you have tried resetting the SMC (http://support.apple.com/kb/HT3964) and PRAM (http://support.apple.com/kb/ht1379). If you haven't tried this yet, please do!
See the following support document as well: http://support.apple.com/kb/TS1367.
The update you're talking about was the firmware update. Hopefully resetting the PRAM gets you up and running. Try resetting it 3 times in a row (hold the keys down until you hear 3 startup chimes).
Message was edited by: adamb529 -
How can this be fixed?
Hi DS,
Thanks for the response. Unfortunatly those documents are of no help to me. I have tried several times to boot into the AHT, which didn't work. And attempting to do an internet recovery won't even allow me to log into my wireless network, even though I know the password is correct.Let us try to go through this step by step, as I've been doing.
1) After resetting the NVRAM it still does not see any new hard drive, and I don't need to select the old HD to boot from it. If it is in it works.
Therefore this means that it is
a) not the SATA cable
b) not the new hard drive because my friend got his replacement HD today and I checked them both out. They both work fine on my other friends new macbook pro.
2) The old hard drive can boot up regularly, and the new one can be seen via the SATA to usb connector and booted from, but not via the internal SATA connector.
Also, I still can't boot into Parted Magic, or any other rescue OS I have.
This seems like a very specific problem, and it definatly wasn't anything I did. I followed troubleshooting steps like I normally do and it wasn't a clusterfuck as you so elequently stated.
Please take the time to respond to all of my questions this time, I feel like you are overlooking some very important information.
Thanks,
RFJ3200 -
I recently purchased a new MacBook Pro. I transferred my CS4 from my older MacBook Pro to my new computer, and although it seemed to be working fine now some fonts will not work when PDFing documents from InDesign CS4. These fonts are installed on my new computer, can be found in InDesign CS4, and work fine within the program but will not appear in PDFs. The letters turn into rectangles. Does anyone know why, and how to fix that?
Help/input would be much appreciated. Thank you!
Kristen.you should properly install adobe products, not move, migrate or otherwise transfer them.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
I cannot connect my MacBook Air to a projector - It will not detect a 2nd monitor or display. I am using an Apple made Mini Display port to VGA adapter. As I read online I see that many other peple are having the same problem. Is this an Apple defect!!???? If so it just burst the bubble about how great macs are. I never had a problem with that on a PC. I hope I am wrong. What can you tell me?
Hi There,
I have had the exact same issue but with a projector.
The issue lies with Mountian Lion 10.8.2.
I tried many a combination with no luck to get HDMI working.
Took my mac into the apple store and came to the conclusion it was the software, so I asked them to install 10.8 onto it (this is destructive so a backup is a must)
Bought my macbook home and voila, now displaying through my projector.
There is a small graphics update after 10.8.1 which seems to be the cause.
Hope this helps.
Thanks.
Maybe you are looking for
-
My iTunes keeps saying that I need authorization but I'm already authorised.
Whenever I try to sync my iPod with my MacBook Pro in iTunes, it says that it needs authorization. The only Problem is that I'm already authorised. I keep authorising it until I can't stand it any longer. I have synced it to other computers and switc
-
I have followed all the directions for "How to Create New Web Forms" everything worked perfectly up until Section 5: Changing and Translating Labels for Web Content. I imported the Example Project with note 817876 - but am getting the following erro
-
Publishing front panels with web server
Hello, I'm working with LabView 7.1 and trying to publish a front panel by means of the web server. The problem is that I'm only able to connect to the VI through the internet when both , the host and the remote are networked. When I try with comput
-
OMB Script: Need help to spot what's wrong
I have been trying to find out why the outer foreach loop in the following OMB script (log follows) doesn't go to the next iteration. It just exits after getting the lineage for the first target table (i.e., stderr has nothing). Same behavior against
-
Check the coupon code section for limited time deal
Latest offer: 'Save Over 50% Off Today's Woot' In the last day, 4 promos have been used. Community sourced deals are a great source of discounts and coupons. How do wingnuts gain the best Woot Coupon Code guidance? Take a look at our 5 Woot offers in