When i update BIOS message show me invalid flashint.bin

hi , I have Lenovo v570 and try update by Dos , becouse no windows on my device ,
I download my ROM and files from downloader here , when i try from dos this message showed :
invalid flashint.bin , what I should to do ?

I already did all that before u can check my link for more deatils .
http://forums.lenovo.com/t5/Lenovo-3000-and-Essential/my-laptop-v570-hang-loading-when-installing-wi...
Also , want update something , I installed windows xp , and work well on safe mode only , need to update my biso by safe mode , when I try do that i get message say " u cant open on safe mode " and sometimes another message show says " filed to open file " any way to update my bios by safe mode xp ?

Similar Messages

USB and SD card both ejected when ejecting only one, message shows one disc not ejected properly

I have a late 2012 iMac running OSX Mavericks. I had a USB memory stick (32gb Sandisk USB3.0) and a Sandisk 32gb Extreme SD mounted at the same time. When I ejected the USB stick both disappeared from finder and a notification showed saying that the SD card was not ejected properly. I'm sure this issue present prior to Mavericks - can anyone shed any light on the cause and what to do to prevent data corruption? Many thanks.

EDIT:
The machine went to the Genius Bar. The Genius replicated the issue, and recommended a left-side IO board replacement. That procedure was performed, and at first appeared to address the issue. SD cards inserted in the store ejected and re-mounted successfully.
The issue has re-emerged, however, so it was clearly not a hardware (only) problem. When I mount the SD card named "Small Test" in the machine after a restart, the machine sees the card and shows the following messages in Console:
18.1.15 17:55:39.000 kernel[0]: hfs: mounted Small Test on device disk4s1
18.1.15 17:55:39.702 mds[34]: (Volume.Normal:2464) volume:0x7fbe16032a00 ********** Bootstrapped Creating a default store:0 SpotLoc:(null) SpotVerLoc:/Volumes/Small Test/.Spotlight-V100/Store-V1 occlude:0 /Volumes/Small Test
That indicated to me that Spotlight was indexing the SD card. I added the card to Spotlight's privacy settings, and the next time I mounted it I got this message in Console:
18.1.15 17:55:52.000 kernel[0]: hfs: mounted Small Test on device disk4s1
18.1.15 17:58:30.000 kernel[0]: hfs: unmount initiated on Small Test on device disk4s1
So that's good. That's what is supposed to happen.
But after a period of time (a short period) after the SD card ejected, when put back into the slot it did not mount. Same behavior as before. This indicates to me that it's NOT a Spotlight problem but rather something else, something that is time-dependent. But I don't know what process that is. Time Machine, perhaps? I added the SD card to Time Machine exclusions as well, but to no avail. Plus, I'd have to do this for EACH SD card I insert, which seems ridiculous.
Clearly something is going on between the OS, the SD hardware, and the SD card. But I'm flummoxed as to what it is.

I am trying to update Itunes - message is " Invalid signature - download removed' any ideas

I am trying to update Itunes - message received is " Invalid signature - download removed" Wassup doc ???

Try the update again. I received the invalid signature message when I updated to 10.5.1, but re-trying sorted it out. I might have had to re-start my computer, I can't remember now.

Error when copying update rules!!!

Hello All,
I am trying install 0SD_C03 from business content, however I am getting following error. Cube got installed properly.
Error when copying update rules
Patch levels are
SAP_BW - 0014
BI_CONT - 0005
Please help me in solving this error.
Regards,
PNK

Hi,
The error message show as below. There is no longtext
Error when copying update rules
Message no. RSAU457
But, when I installed FI-AP cubes, update rules are installed without any error. Is there any settings differs from FI to logistics datasources?
Regards,
PNK

I started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

started the newest update for my phone but when it started installing it to the phone, a error message showed up and now my phone is stuck in recovery mode and itunes wont recognize it. what do i do?

Any numbers or other details on the mesages given?
Did you try to connect in recovery mode again? iOS: Unable to update or restore
In case your network connection timed out, check your security software settings: iTunes for Windows: Troubleshooting security software issues

I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up pictures

I recently backed up my iphone to itunes, when after backing up a message showed that I needed to update my iphone. I clicked ok, and after updating, it said I had to restore my phone to its factory settings. I cannot find where it backed up all of my pictures from my phone.

If you backed up the device, all the data is in the backup. Restore the backup.
A better question is why would an intelligent person not copy the pictures from the device to the computer regularly, especially before attempting an update, as the device is designed to be used?

Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

Hello Sir I have an iPhone 4 and when i updated that it got updated but now for restore the data it is showing me the message The "iPhone" could not be activated because an unknown error occurred (0xE8000004). Please try again later. please help me.

Hello Amarchand Sharma,
Are you working with a Windows computer? If so, the resource below may help you troubleshoot the issue you are having restoring your iPhone.
iOS: Unknown error containing '0xE' when connecting to a Windows PC - Apple Support
http://support.apple.com/en-us/TS3221
Regards,
Judy

Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'

Unable to update iTunes. Get 'iTunes has an invalid signature. It will not be installed.' When I reboot, get message 'Apple Sync Notifier.exe entry point not found'
Please help...need to get newest update so I can activate my new IPhone4. Thanks

That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

I recently updated the software on my ipad2 to 5.0.1 and when I send a message via "chat" it shows on all the iPhones associated with my account (my sisters, my husbands, etc) is there a way to stop that?

I recently updated the software on my ipad2 to 5.0.1 and when I send a message via "chat" it shows on all the iPhones associated with my account (my sisters, my husbands, etc) is there a way to stop that?

If you have been using your phone as recommended, you should have minimal data loss from the inability to restore from a backup.
Contacts and calendars should be synched to a computer application like Outlook or Address Book (or a cloud service like Google Contacts or iCloud). The update process does NOT affect these computer applications so your contacts and calendars should be safe and sound in the application ready for synching back to your phone.
Same for photos. It is recommended that photos be imported to your computer as soon as possible after taking them (just as you would import them from any other camera) for storage, archival and safekeeping. Again, your photos should be safe and sound on your computer.
If you've not been using your computer as recommended, you've learned a very hard lesson, I'm afraid.

HT2404 when downloading through apple software update i get a message which reads invalid signature

when downloading through apple software update i get a message which reads invalid signature

If you are trying to update iTunes, try downloading it and installing manually. Go to http://www.apple.com/itunes/download/, download the latest version and save it on your computer, then double-click on it to install.

HT4623 am update my iphone 3gs ios4.1 to ios 6.0.1 using itunes when update comleted itunes show a message Were sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care! pls help me pls

am update my iphone 3gs ios4.1 to ios 6.0.1 using itunes when update comleted itunes show a message Were sorry, we are unable to continue with your activation at this time. Please try again later, or contact customer care! pls help me pls

Generally this is a sign that the iPhone had previously been
hacked/modified/jailbroken and the update relocked it to the
original wireless carrier. If this is the case, only that wireless
carrier can unlock your iPhone. You must contact them to see
if they offer unlocking and if you qualify.
Where did you acquire this iPhone?
What wireless carrier did you use before this problem?
Does the app Cydia appear on your iPhone?
What does it say when you look at Settings=>General=>
About=>Carrier?

Thinkpad T440s BIOS update via PXE fails with "invalid system disk"

Hi,
I'm trying to boot via PXE to the BIOS 2.24 update ISO image because the T440s comes without a DVD drive. The Thinkpads are running RHEL 6.5 workstation installed. I'm using syslinux 6.02 and the following menu entry:
label lenovo_t440s
    menu label Lenovo Thinkpad T440s BIOS 2.24 Update
    kernel memdisk
    append initrd=lenovo/t440s/gjuj11us.iso iso
The ISO gets loaded via TFTP and seems to boot, but then an error message appears:
Loading boot sector... booting...
Lenovo Group Limited
Invalid system disk
Replace the disk, and then press any key.
The Thinkpads come with the following SSD drive: SAMSUNG MZ7TD256HAFV-000L9.
Anyone had luck with updating BIOS via PXE boot?
We also have Thinkpads T430s. There the BIOS update ISO image loads, displays the menu, but when one presses "update firmware" then it freezes.
Regards,
Bernd

Same behaviour when I try without PXE and load memdisk and ISO file directly via GRUB using this entry in /boot/grub/grub.conf:
title ThinkPad BIOS Update
root (hd0,1)
kernel /memdisk iso
initrd /gjuj11us.iso

TS3694 I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iP

I keep getting the error message "-42408" and all of my apps got deleted on my iPhone. It says that I need to authorize my computer, so I tried than and that's when the error message showed up. I'm pretty ****** and want my apps to be back on my iPhone. Please help.

What version of iTunes are you using? The error you references seems to be connected with iTunes 9.0.4. That version of iTunes is not compatible with iOS 6. You need to update to the current version of iTunes.

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114

I have a new iPhone 5 and receive the following message when texting some people within my contacts. Message sent using invalid number of digits please resend using 10 digit number or valid short code Msg:2114. Online I found a discussion that stated i needed to delete contact and re-add. I have done that to no avail. Any ideas?

I had the same issue with the iPhone 6 and tried everything! I now understand that at some point I stored a number for a contact without including the area code and sent a text message. So, to correct the issue, you must literally "erase" all references to the contact, not just the number. Deleting the contact and entering a new one is not enough because the iPhone stores references to that number in multiple places. The steps below worked and are very simple:
1) On the contact screen, delete everything stored for that number. You can't just edit the contact to fix the problem, so write down or record the info somewhere before you complete this step. Choose edit and then select DELETE to eliminate the entire contact which means home, work, cell, email address, etc.
2) Delete the entire string of messages you sent to that number. That's every single message...
3) Now delete the entire string of invalid 2114 messages you received after your text(s) failed.
4) Finaly, remove the contact from FAVORITES if you saved it that way.
5) To validate that all this worked, simply go to the keypad or contact screen and enter the number associated with the contact to verify successful removal. I used the keypad and dialed to confirm. If the contact number still shows up, you need to go back and recheck your steps. Trust me, I had to do this a few times.
Several posts suggested that you should reset and turn off your phone. After following these steps, it was not necessary for me to reset or turn off my device.
is there a much faster way to achieve the same results? Probably, but this was safe for an iPhone novice and may help you avoid inadvertently deleting other contacts or replacing factory settings that you need.

Fatal Error code C0000043 shows when applying update - Can't repair though!

I was updating an old laptop with the current windows updates since I hadn't used it since 2012. After the updates were download and the computer restarted, it got stuck loading the files. The Fatal Error message showed C0000043.
Now I've read other articles where you can press F8 to get the the boot options menu to try to repair it. When I do get there the two options I get are to Start windows normally (which just proceeds to get stuck again while trying to load), or Launch Startup
repair (which then gets stuck loading the files). Since I can't get in the the windows repair, I can't proceed with steps to fix the update issue.
Any solutions you have for this problem?

Hi,
Since the computer won’t boot normally, I suggest to repair it with a installation media in this way:
1.Insert the Windows 7 installation media.
2.Restart your computer.
3.Press key F12 or other keys it shows to select the boot menu when prompted to do so.
4.When the Install Windows page appears, click Repair your computer to access system recovery options.
5.Follow the instructions it shows.
You can also follow the article for detailed steps:
http://windows.microsoft.com/en-hk/windows7/start-your-computer-from-a-windows-7-installation-disc-or-usb-flash-drive
After entering the system, you can try fixing windows update problem in this way:
1. Run the windows update troubleshooter:
http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter
2. To automatically reset Windows Update components, click the hot fix below and then follow the on-screen instruction:
http://support.microsoft.com/kb/971058
3.Perform a clean boot to fix it:
a. Log on to the computer by using an account that has administrator rights.
b. Click Start, type msconfig.exe in the Start Search box, and then press Enter to start the System Configuration utility.
c. On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
You can also follow the steps listed below:
http://support.microsoft.com/kb/929135
Regards
Wade Liu
TechNet Community Support

When i update BIOS message show me invalid flashint.bin

Similar Messages

Maybe you are looking for