When I update IOS i get error 3200

Getting an error message 3200 after verifying apple software is displayed

Same here. Doesn't matter if I do a restore or an update. My desktop does a full backup of my iPhone 4 (4.3.5 AT&T), then prepares to update, then fails with error code 3200. 5 times now.
This is on a Win7-64 desktop running iTunes 10.5-64

Similar Messages

  • Updating to iOS 5, getting error 1602 message...

    Hey all,
    as like many i've been having trouble updating my iPhone to iOS 5.
    I've been getting the error code 1602.  I've read online that everyone is getting error 3200 resulting from overloaded servers.
    Is the 1602 error happening because of the servers or is this a different error altogether?
    Anyone know how to get around this? My phone is currently in Recovery Mode...updates continue to get the same error 1602
    Any help would be appreciated!!
    Thanks!

    I have the same problem, error 1602, when trying to update to the latest iOS 5.
    I have a Macbook Pro running Windows 7 64-bit, running Kaspersky anti-virus, the new iTunes (12 October 2011), and an iPhone 4 (32 GB).
    1) Last night the first problem I had was a failure to backup the iPhone, so I gave up.
    2) Today, I managed to backup the iPhone, but then it froze in the Recovery Mode (see image #4 in the 2nd article below), and was unrecognized by iTunes.
    - I disabled my Kaspersky anti-virus software (which has caused problems always in the past with all other iPhone iOS updates and downloads)
    - I restarted iTunes twice, but it failed to recognize the iPhone
    - I did a forced restart (holding the home button + on/off button) and it managed to finally get it recognized, and then it asked to restore, which it is doing.
    - It restored to factory settings, and it is now recognized in iTunes again and it is restoring from the backup (5 mins +/-).
    - Now it has rebooted and is finalizing the Restore (very long and vague amount of time, depending on the size of data (music, apps, etc) to transfer.
    I have clicked through these Apple Support articles already for guidance:
    http://support.apple.com/kb/TS1275 - The first support I read, but I knew my USB wasn't the problem.
    http://support.apple.com/kb/TS3694#error1602  - The most helpful so far
    http://support.apple.com/kb/HT1808 - This is what I then tried, by doing a forced restart
    http://support.apple.com/kb/TS1538 - Additional resources if needed
    This seems to have worked for now, it is still copying over the content from the backup. I hope it is iOS 5 on it!
    Good luck, such an annoying process, I really hate installing the new iOS, there are ALWAYS problems.
    DMR.

  • When i attempt to update itunes i get error message, "errors occurred while installing the updates".  What can i do to get the update?

    I cannot download and install I-Tunes update.  I get error message, "Errors occurred while installing the updates.  Choose tools>Download Only".  When I do this I get error message that says, "I Tunes has an invalid signature.  The download has been removed."  What can I do to get update?

    Finally got a response from Apple. They suggested I uninstall Itunes, then download and install the latest version. Worked great and I was able to recover all of my purchases.

  • TS3694 I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

    I was updating the latest software i.e iOS 6 on 3gs and battery got finished and now I cant turn my phone on and when I update it with itunes error 3194 comes up

    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HT201263 None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

    None of the above have worked. Ipad completely bricked. This began when merely updating IOS software as instructed. Now Apple want to charge me for using their crappy software as directed. Surely this is not only immoral but potentially illegal.

    Read: iPad Troubleshooting Assistant
    That procedure eventually leads you to the need to restore it.
    Make sure you are following the instructions in this procedure to the letter. Here they are, with emphasis on some easily overlooked requirements:
    Disconnect the USB cable from the iPad, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. Be patient since it sometimes takes several of these attempts before you are successful.
    If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links. 
    Select the iPad in iTunes and choose "restore from backup". This assumes you have a backup. If you do not, you will have to download all your purchased iTunes content again. You do not have to pay for anything you already purchased.
    If you still can't get it to work, you have done all you can and only Apple will be able to help.

  • Trying to update PS/AE , getting Error (U44M1P34)

    Trying to update PS/AE , getting Error (U44M1P34) , ive reinstalled PS and tryed it again but still keep getting this error code , can anyone shed any light on a fix for this.
    Cheers
    Jafa.

    This error comes when Updates are not able to identify the base product installed.
    Please ensure that in Ps->Help->Update->Preferences, Updates list is as per the products installed on your system.
    If not please re-install them.
    Regards,
    Ashutosh

  • Just got an iPad 2 and neither Keynote nor Pages were compatible. when I updated iOS as requisited, the backup from iTunes didn't work. the iPad doesn't connect to iTunes. what do I do?

    just got an iPad 2 and neither Keynote nor Pages were compatible. when I updated iOS as requisited, the backup from iTunes didn't work. the iPad doesn't connect to iTunes. what do I do?

    Usually it's because you are not making internet connection via wifi.
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
     Cheers, Tom

  • When i open itunes i get error 7 (windows error 998) and to re install intunes which i have tried 3 times

    When i open itunes i get error 7 (windows error 998) and to re install intunes which i have tried 3 times

    Please repair Microsoft.net Framework
    iTunes for Windows: "Error 7" message when opening iTunes
    http://support.apple.com/kb/TS3074

  • I am try to burn a dvd from iPhoto in iDVD, when I click burn I get error message I don't have SuperDrive and dvd is ejected. I have burned dvd's before. What am I doing wrong?

    I am try to burn a iPhoto slideshow on to a dvd in iDVD, when I click burn I get error message and dvd is ejected. I have burned dvd's before. What am I doing wrong?

    error message I don't have SuperDrive and dvd is ejected
    If you don't have a SuperDrive you will not be able to burn DVDs. 
    Did iDVD come preinstalled on your Mac?  If it did then you should have a SuperDrive and be able to burn DVDS. Check the Disk Burning section of System Information
    to see what you can read and write with your optical drive:
    OT

  • I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Do you know a fix for this?

    I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

    I have had to reinstall my Mavericks OS and use a Time Machine backup. Now when I open InDesign I get Error:5 , AMT subsystem failure. Does anyone have a fix for this?

  • I have a Canon MG6120. When I start it I get error code 5050. Does anyone know how to resolve this?

    I have a Canon MG6120 all in one. When I start it I get error code 5050. Does anyone know how to resolve this, besides power off/ power on?
    Solved!
    Go to Solution.

    Hello gregg.
    Please try the following to see if we can resolve your issue:
    1.  Turn the printer off.
    2.  Unplug the power from the printer for at least 5-10 minutes.
    3.  While unplugged, remove any paper from the unit.
    4.  Double check for any obstructions found in the unit or paper paths.
    5.  If no obstructions are found, plug the power back in and turn the unit on.
    If the issue persists, the unit will require service for correction.  We apologize for this inconvenience.  Please contact our support group using the "Contact Us" option below for additional assistance.
    This didn't answer your question or issue? Find more help at Contact Us.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.  How to get it working?

    I installed Photoshop Elements 12 and its icon is on desktop, but when I launch it, I get error messages.
    How to get it working?

    My guess is that you won't be able to do much if you threw away the serial number before using it.  The serial number will not have been externally visible on the box though... doing that would make it available for use by anyone who sees the box in any store.
    To locate the serial number:
    http://helpx.adobe.com/x-productkb/global/find-serial-number.html
    If you remain unable to locate the serial number you might need to head back to wherever you purchased the product to confirm whether or not you might have thrown out the serial number or if it could even possibly have never been provided.
    Beyond that you need to resolve serial number issues with ASdobe Support directly.  Here is a link for chat:
    Serial number and activation chat support (non-CC)
    http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

  • When i update ios 8, there some of my pic in my photo album did't show on my album, but show in photos? secondly, why my album split into 2 and out of one has 3 local disk file in it?

    problem occur when i update ios 8

    Photos taken with the phone are not stored in the camera roll anymore, Apple found a new way to sort your photos.
    By default, Photos displays a representative subset of your photos when you view by year or by collection. To see all your photos, go to Settings > Photos & Camera, then turn off Summarize Photos.
    View by location. While viewing by year or by collection, tap . Photos and videos that include location information appear on a map, showing where they were taken.
    While viewing a photo or video, tap to show and hide the controls. Swipe left or right to go forward or backward.
    Search photos. From Albums or Photos, tap to search by date (month and year), or place (city and state). Search also keeps your Recent Searches on hand and gives you a list of suggested searches.
    copied from page 82 of the user guide iOS8

  • Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101

    Hi everyone,I have an Iphone 4S,when I updated iOS 7 my phone got slow,so please help me how to downgrade it to 6.1.3 or 6.1.3,I have another problem with iOS 7,I cant request my credit balancing,when i type *101# automatically calls and says "this number dows not excits",I wnat iOS 6.1.2 back ..

    sorry for my bad english ..

  • Please Help ... Update iOS 6.1 Error !!!!

    Please Help ... Update iOS 6.1 Error !!!!
    Update iOS 6.1 via iTunes ... (Connect my iPod to my PC)
    Download iOS 6.1 Complete
    But Install Error
    Now my iPod Touch 5th is Dead !!!!
    iTunes can't see my iPod Touch 5th

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for