When i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do
when i update my iPhone 4s through iOS 7 with my mac, i tunes told me that an upgrade was necessary to sync with the new iOS 7 and of course i updated my iTunes to the ultimate version but my mac didn't work with this version of i tunes. What can i do
Hello,
Only option is upgrading your Mac's OSX, since Apple will not allow iOS to go backwards.
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
Similar Messages
-
my ipad was in recovery mode and it went back to the home screen and it found my info on itunes to the point where i can put music on it but it still says connect to itunes
sarahwood wrote:
.. it said my iPod was in recovery mode and I needed to restore it?
Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
To minimise loss... after the successful Recovery... Restore from the most recent Backup...
See Restore from Backup here
http://support.apple.com/kb/ht1766 -
I have a big problem in my account in Game Center ..
I have been an account before in the game center and i change it to another one ...
when i play any game its change by itself to the last account not still to the new one and i lost my update in my game
How can i keep the new account in my game center and didn't change again ?
My new account is :[email protected] ............Thats i wanna to keep it
The old one is :michael-adel [email protected]
Thank youI have a big problem in my account in Game Center ..
I have been an account before in the game center and i change it to another one ...
when i play any game its change by itself to the last account not still to the new one and i lost my update in my game
How can i keep the new account in my game center and didn't change again ?
My new account is :[email protected]. ............Thats i wanna to keep it
The old one is :michael-adel [email protected]
Thank you -
I just downloaded the new OSX 10.8.3 operating system, and now my e-mails are stuck in the outbox. I've tried to send various ways with no luck. Help!
Does the new IOS 8 and instagram only allow pictures taken with the phone? as I can still choose from those, just not the ones I upload/save.
I don't know about instagram, but apps, that not yet have been upgraded to iOS8 can only access the photos that appear in the "Recently Added" album, because there is no longer a Camera Roll.
As a work-around, try to create an album of the photos you want to share to instagram. For other apps this helped to make photos accesible. -
Okay. here's the deal. First, I received the original Ipad for a birthday present. Now, I have the ipad 2 and my dad has my original ipad. We were able to delete all of the apps and reset most of the other items. However, I originally had the kindle app on there and when he is reinstalling it comes up with my kindle account. How do we change this? He does not have an actual kindle so I am not sure if he would be able to create one anyways. I just don't want it to keep on coming up with my account.
Thank you!However, I originally had the kindle app on there and when he is reinstalling it comes up with my kindle account. How do we change this?
OPen teh Kindle app.
Tap the i at bottom right then Settings > Deregister this device.
-> http://www.amazon.com/gp/help/customer/display.html?nodeId=200375710&#managedevi ces
He does not have an actual kindle so I am not sure if he would be able to create one anyways.
The Kindle app is so you do not have to use a Kindle. Yes, he can have a Kindle account and not own an actual Kindle hardware device. -
It will not let me play the bejeweled 2 game with sound the new version of firefox disabled my sound?? Please help?????
Not sure whether for instance you initially had a Yahoo optimised version of Firefox, and have now overwritten it with an official Mozilla version. Although the Mozilla version should NOT add unwanted features, but the Yahoo version may well do.
If you merely need to find the Yahoo emails page quickly just add it as a bookmark or as a bookmark on the Bookmarks toolbar and make sure that is visible.
Clicking the star icon on the location bar whilst looking at your emails will bookmark the page.
* [[How to use bookmarks to save and organize your favorite websites]]
* [[Bookmarks Toolbar - Display your favorite websites at the top of the Firefox window]]
I do not use Yahoo myself,and am not sure what add-ons are available. You could search yourself using
* FirefoxButton -> add-ons
** see [[Find and install add-ons to add features to Firefox]]
** examples [https://addons.mozilla.org/en-us/firefox/addon/yahoo-toolbar/ yahoo toolbar] & [https://addons.mozilla.org/en-us/firefox/addon/yahoo-mail-notifier/ mail notifier]
* also look at Yahoo's own information such as http://help.yahoo.com/tutorials/toolbar/cl3/c3_ff_toolbar1.html -
Windows 7 system... everything was working correctly before the new persona. I have scanned and cleaned out my cache; no problems or viruses.
Actually, I've solved the problem. It wasn't the Persona at all. I got a clue that someone else had the same problem after using CCleaner, and I had just done the same thing. My problem was corrupted cookies. I tried several fixes - nothing worked - so I just ran CCleaner again, and it straightened everything out.
-
One of the messages I get says "Now that you've got Firefox 4, learn about all the cool things you can do with your new browser" There are several other little messages that also show up plus the "restart previous session" box. I just want a clean firefox home page to open when I want to use my browser. If I can't get this to stop I'll go back to explorer.
You can make '''Firefox 7.0.1''' look like Firefox 3.6.*, see numbered '''items 1-10''' in the following topic [http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface Fix Firefox 4.0 toolbar user interface, problems (Make Firefox 4.0 thru 8.0, look like 3.6)]. ''Whether or not you make changes, you should be aware of what has changed and what you have to do to use changed or missing features.''
* http://dmcritchie.mvps.org/firefox/firefox-problems.htm#fx4interface
<p>There is a lot more beyond those first 10 steps listed, if you want to make Firefox more functional.</p>
<p><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small></p> -
I have anew computer and my ipod was attached to the old one, how can i have my music download to the new computer and sincronize it.
If you no longer have the old computer this will be very helpful and If you have other content - apps, books, movies, that you want to transfer to the iTunes library - you need to transfer your purchases from the iPod to the computer as well.
Take a look.
https://discussions.apple.com/message/16153193#16153193
This works the same way whether you have a Mac or a PC. -
Updating Infotype 0077 for the New Race and Ethnicity Codes
Hi,
I would like to ask for a help or any ideas on below case:
There are new race and ethnicity codes required by the US EEO Law. I've already maintained them in table T505R. My problem now is on how infotype 0077 records of the employees will be updated showing the new race and ethnicity codes. Program RPURACU0 is use to update the records in infotype 0077. In this program, I first map the old ethnic origin to the new race and ethnicity codes. But after I've run and execute the program, infotype 0077 records of the employees still shows the old ethnic origin codes. It does not show the new race and ethnicity codes which should be based on the mapping I've done.
Another problem is that in infotype 0077 in the field "Ethnic Origin", upon clicking on the drop down list, it shows all of the entries I've entered in table T505R. I think that ethnicity and race categories should be two different fields and thus, there should be another field for the race categories. May I know on how to add such field?
To summarized, I need help in the following:
-how to update infotype 0077 showing the new race and ethnicity codes
- how to create field "Race" in infotype 0077 to display the new race categories
Thanks in advance for your help!Mary,
We have applied the relevant note, updated MP007700 (as below) and executed program RPURACU0 with the required mapping. However, the Race field check boxes are not visible on IT0077 because as you can see the relevant field is not listed below.
Module Pool MP007700 Variable key 10
Standard screen 2000 Feature
Alternative screen 2010
Next screen 2010
001 P0077-RACKY Ethnic origin
002 P0077-MILSA Military status
003 P0077-ETHEN Ethnicity
004 P0077-SURVY Survey answered
005 P0077-DISAB Disability
006 FRAME_2 Veteran Status
007 P0077-MEDIC Benefit Indicator for Medicare
008 P0077-DISDT Date of Determination of Disabil
009 P0077-DISLE Date Employer Learned of Disabil
011 P0077-EEOEX EEO Exempt Indicator
012 Q0077-VETS2 Veteran status
013 Q0077-VETS3 Veteran status
014 Q0077-VETS4 Veteran status
015 Q0077-VETS5 Veteran status
016 Q0077-VETS6 Veteran status
017 Q0077-VETS7 Veteran status
018 IT_ITAB-MARK
019 Q0077-VETS1 Veteran status
021 FRAME_1 Additional Personal Data
023 FRAME_3 Disability
Thanks!
Edited by: Victoria Nate on Sep 23, 2008 6:35 PM -
I had to change my apple ID and now I can't access certain features on my phone because I dont remember the old ID password, how do I get my phone to recognize the new ID and password
What features do you need to change the ID for?
-
The new keyword and the newInstance method
Hi friends
Can any one tell me the difference between creating an instance of a class by the new keyword and creating an instance of a class by the newInstance method in java.
Also how do I decide which method to use for a given condition?Hi friends
Can any one tell me the difference between creating an
instance of a class by the new keyword and creating an
instance of a class by the newInstance method in java.
Also how do I decide which method to use for a given
condition?Hello,
in the todays java technology newsletter there was a interesting and useful task for the newInstance-method.
You can compile any class at runtime and start this program with newInstance.
If you want to develop your own IDE it would be very useful ;)
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.io.*;
import java.lang.reflect.*;
public class RunIt extends JFrame {
JPanel contentPane;
JScrollPane jScrollPane1 = new JScrollPane();
JTextArea source = new JTextArea();
JPanel jPanel1 = new JPanel();
JLabel classNameLabel = new JLabel("Class Name");
GridLayout gridLayout1 = new GridLayout(2,1);
JTextField className = new JTextField();
JButton compile = new JButton("Go");
Font boldFont = new java.awt.Font("SansSerif", 1, 11);
public RunIt() {
super("Editor");
setDefaultCloseOperation(EXIT_ON_CLOSE);
contentPane = (JPanel) this.getContentPane();
this.setSize(400, 300);
classNameLabel.setFont(boldFont);
jPanel1.setLayout(gridLayout1);
compile.setFont(boldFont);
compile.setForeground(Color.black);
compile.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
try {
doCompile();
} catch (Exception ex) {
System.err.println(
"Error during save/compile: " + ex);
ex.printStackTrace();
contentPane.add(jScrollPane1, BorderLayout.CENTER);
contentPane.add(jPanel1, BorderLayout.NORTH);
jPanel1.add(classNameLabel);
jPanel1.add(className);
jScrollPane1.getViewport().add(source);
contentPane.add(compile, BorderLayout.SOUTH);
public static void main(String[] args) {
Frame frame = new RunIt();
// Center screen
Dimension screenSize =
Toolkit.getDefaultToolkit().getScreenSize();
Dimension frameSize = frame.getSize();
if (frameSize.height > screenSize.height) {
frameSize.height = screenSize.height;
if (frameSize.width > screenSize.width) {
frameSize.width = screenSize.width;
frame.setLocation(
(screenSize.width - frameSize.width) / 2,
(screenSize.height - frameSize.height) / 2);
frame.show();
private void doCompile() throws Exception {
// write source to file
String sourceFile = className.getText() + ".java";
FileWriter fw = new FileWriter(sourceFile);
fw.write(source.getText());
fw.close();
// compile it
int compileReturnCode =
com.sun.tools.javac.Main.compile(
new String[] {sourceFile});
if (compileReturnCode == 0) {
// run it
Object objectParameters[] = {new String[]{}};
Class classParameters[] =
{objectParameters[0].getClass()};
Class aClass =
Class.forName(className.getText());
Object instance = aClass.newInstance();
Method theMethod = aClass.getDeclaredMethod(
"main", classParameters);
theMethod.invoke(instance, objectParameters);
}regards,
Tim -
i just updated to the new ios version, and now i cant set my phone up as an existing one. i have put it in recovery mode and tried to restore it but it wont work. Itunes will let me set it up as an existing phone and back up all my data but once i unlock my phone it goes through the setting up options and then asks me to either set up as a new or existing phone and when i choose existing it just says connect to itunes and does nothing. can anyody help?
Seems like you are restoring from a blank back up if it is still asking you those 3 options of set up as new, restore from itunes or icloud back up. Set the iPhone up as new then manually restore from a back up. Follow the steps foriTunes 10.7 or earlier in the article below as it is the same process for iTunes 11:
http://support.apple.com/kb/ht1766
When you do this you will be able to check for backs showing date and time. Be sure to choose a back up made before you restored to factory settings. -
Hi everyone! I tried to install the new iOs 7 on my iphone 4, but it wasn't completed (showing error 4005). Now, my iphone is stuck on the itunes' logo with the usb cord, and I can't use my phone. And itunes doesn't detect my iphone when I connect it on my computer, so I can't put it in recovery mode or someting like that... What can I do?? I tried everything they tell me to do in the apple support but nothing seems to work. Thank you!
No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine. -
I use an Iphone 4 which had to be replaced recently. However when i did a backup it was on the new IOS version 7, but now that my phone was replaced and i am back on the old IOS version 6 i how do i restore my backup??
When i try to restore my Back up using Itunes this is the message i get - "Unable to restore backup as the software is old - Please setup as a new device and then try to restore your backup" - Please advise. If i do so are there any chances of loosing my data. At this point in time i would be happy if i could just retreive my contacts list. Any suggestions would be greatly appreciated.Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.
Maybe you are looking for
-
Can´t edit a form to fill in and save
When I edit a PDF-form which is activated to be able to fill in and save I have to save a copy first. After that I edit the copy and save it activated for "fill in and save" and give it a new name. (Don´t know the proper word for this in English as I
-
Can you use just any camera(that hooks up USB) with Mac Mini for FaceTime
Was just wondering?
-
Hi, my scenario is WS <-> Proxy using PI 7.1. in proxy calling an RFC to update data into tables. my question is based on some source fiield i want to call different RFC. I know that in SAP we can call diff RFC based on condition.. can we achieve the
-
hi experts, in my sm37 spool request i want to download in execl sheet. by means of ALV so that i can download completly in Horizental diraction , no line going to split.. but its layout in in classical list format i am not able to tacke correct fo
-
Hello All, We have a use-case in which an SOAP message will be received by OSB proxy service. The 3 step process is described below: 1. OSB will extract EDIFACT message from request and write it to the SOA JMS queue IE012_IN_Queue. 2. B2B listeneing